Reviews Marine Engine Oil Pressure Gauge Kit

Oil Pressure Gauge Adapter, 1/8in NPT Female to M10x1.0 Male Reducer Oil Pressure Gauge Adapter Replacement Black

  • [ IMPORTANT ] VMS RACING Brand Design (NOT generic). Comes in VMS RACING Branded BOX. Brand New in Box / Never Used / Never Installed..
  • High Quality Silver Face 0-60 Psi Triple Chromed Oil Pressure Gauge with TWO Triple Chromed Plated Fittings and O-ring included to match the gauge and for a long-lasting finish. EVERYTHING IS TRIPLE CHROMED... EVEN ALL OF THE FITTINGS so you will NOT see any brass . Beautiful finish to compliment your most prized Harley. PERFECTLY DRESSED FOR ANY OCCASION. If you have other nice chrome pieces on your ride, this gauge will feel right at home and a must-have..
  • Measurements: Gauge face (w/ bezel) - 1.66" (42.25mm) Gauge Case - 1.62” (41mm) Gauge Depth ~ 1” (25mm) Fitment: Fits (70-84 Shovelhead) (84-99 Evolution) and (38-69 & 84-91 Big Twin Models) Engines ONLY. Fittings allow for a FLAT MOUNT (or) 45 Degree Mount depending on the application. Triple-chromed / Brass INTERNALS. 1/8 NPT main Male Fitting.
  • VMS RACING Oil Pressure Gauge Kit Provide you with a MORE ACCURATE OIL PRESSURE READING than Liquid Filled Oil Pressure Gauges. Liquid Filled Gauges tend to lose the liquid due to Engine Vibration. You eliminate that problem with this gauge. This Kit allows for accurately measuring Oil pressure in your Big Twin Engine. ....
Check Stock

JoyFans Oil Pressure Tester Tool, 0-140PSI Oil Pressure Gauge Kit for Fuel System Mechanical Sensor Engine Cylinder Compression Test with Hose Adapters for Cars ATVs Trucks Use Red Case

  • Fuel Injector Pump Pressure Check: Engine oil pressure test tool kit is designed to test oil pump pressure and check operation of fuel system components. Compare the measured pressure value to the standard reference range from manufacturer, we can take quick and accurate diagnosis and feasible solution on the oil pipeline leakage and engine wear, so as to confirm if the oil pressure gauge has been damaged. No more reliance on the dashboard light..
  • Oil Pressure Tester: The petrol engine cylinder tester kit has a shockproof rubber casing and a large clear dial with readings from 0~140 psi and 0~10 bar for easy and accurate work on both American and metric systems. Keeping the gauge safe from bumps and drops. Built-in hose assembly also comes with a side pressure relief button for instant pressure reset and no repeated hose disconnect, and 4 ft long flexible hose with convenient quick coupler for simple adapter installation and removal..
  • Durable Construction: 11-piece metal adapters are all made with heavy-duty forged steel and brass hardened for maximum strength and longevity.
  • designed to withstand extreme pressure in any situation for professional use. Each thread adapter marked with number, features black oxide finish to resist rust and corrosion.
Check Stock

Shankly Mechanical Oil Pressure Gauge Kit Compression Tester - Professional Engine Compression Testing Kit or Gauge Oil Pressure

  • ✅ OIL PRESSURE GAUGE KIT: Shankly's oil pressure gauge is used to monitor the oil pressure in your vehicle. This pump tester prevents you from engine failure, broken hose, or leaking gasket due to lack of oil. Great to have in your toolbox.
  • ✅ DURABLE & GREAT QUALITY: Shankly's oil pressure gauge line is well protected by a rubber bumper and a decent length of hose. It comes with spare orings adaptor and with quick connect couplers, making this a reliable tool and long lasting.
  • ✅ UNIVERSAL: This oil pressure tester includes a 90-degree coupling adapter for limited access applications. This is also fitted with quick coupling adaptors and 1200mm of hose that will serve a mechanic effectively for a very long time.
  • ✅ CONVENIENT HANDY CASE: Shankly's oil pressure tool comes in a convenient case, making transportation, storage, and organizing a snap. This oil pressure gauge line kit works perfectly for your setup.
  • ✅ SATISFACTION GUARANTEED: We stand by the word "quality" we assure you that your purchase of this oil pressure test kit will arrive in your place in good condition, If any issues occur, feel free to contact us.
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

YSTOOL Oil Pressure Tester Kit Professional Oil Pressure Gauge Tool for Engine Diagnostic Test with Hose Adapters and Carry Case for Cars ATVs Trucks Use 0-140psi

  • The engine oil pressure tester kit is used to diagnose and test the engine oil pressure value, to check whether it is normal. Prevent engine failure due to lack of oil. And with this best in class tools, you can get a definite pressure value well without relying on the dashboard light..
  • There are 10 types of thread adapters are suitable for most cars, motorcycles, boats and other vehicles with gasoline and small diesel engines. As long as the adapters can match with your engine and oil pressure does not exceed 140 PSI. The 10 adapters are marked with number, you can choose the right one very easy..
  • The pressure gauge uses metal gauge head with shockproof rubber cover, 3" big dial with clear dual scale range 0 to 140 PSI and 0 to 10 Bar. Compare to a large range, this oil pressure gauge is easy to read about 1-2 Bar with a short range. There are a straight quick coupler and a elbow one in the case, you can choose it according to the location of the engine oil pressure test port..
  • Steel adapters, brass quick couplers, are featured with high hardness, rustless, durable and good air sealing. The 4FT long hose is made of rubber nylon resin with MAX. working pressure 300 PSI. There are also a small bag of seal gaskets, which are used for replacing the ones on....
Check Stock

Fuel Test Kit with 1 Reusable Tester for E85, Gasoline, Race Gas, Ethanol, Ethanol-Free Fuel Test

  • 8PCS Professional Engine Cylinder Compression Tester Kit Automotive Tool Gauge,Cylinder Compression Gas Engine pressure test kit.
  • Checking Compression On Petrol Engine Quickly And Accurately，The gauge readings assist to diagnose if there are following problems: valve sticking, carbon build-up, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, burned or damaged piston..
  • Completed Kit Comes With Adapters For Most Applications，There are 16" long flexible extension hose with 4 sizes (10mm 12mm 14mm 18mm) selectable brass adapters in the engine compression test kit,.
  • Pressure release button on the side of the tester helps with easy pressure release, 3" gauge with dual color scale..
  • The engine cylinder compression test tool kit can be widely used for most type and depth spark plug well. If you have motorcycle car truck ATV mower and any other vehicles with gasoline or gas engine, and you are a professional on repairing vehicles, you can try this kit. Please note, this cylinder compression test gauge is not suitable for most diesel engine, because the range of the gauge is only 0-300PSI, which is much lower than most diesel engine compression..
Check Stock

MOTOR METER RACING 6 Gauge Set Classic with GPS Electrical Speedometer Digital Odometer Black Dial

  • Speedometer & Tachometer: Standard 3-3/8"(85mm) sized back. For any 1 to 9 cylinder gas powered engine & 12-volt negative ground systems. Volt gauge, Oil pressure gauge, Water temp gauge, Fuel gauge: Standard 2"(52mm) sized back..
  • FEATURES: In-dash design, Light bulb illumination, Convex lens, Stainless bezel, Plastic housing. Cylinders switch on the gauge back..
  • Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI..
  • INCLUDES: GPS Sensor & Converter, Water temp sensor (Thread size: 1/8 NPT), Oil pressure sensor (Thread size: 1/8 NPT), Fuel level sender, Power harness, U-bracket kit, Tachometer Filter x 2, Installation Instructions..
  • One-year warranty for non-human factor damage and free lifetime technical support..
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock

Quicksilver 10W-30 Oil Change Kit for 4-Stroke Yamaha F75 Through F115 outboards

  • Everything you need for an oil change on all Yamaha F75 through F115 outboards in one box.
  • Kit includes (4) 1L bottles of Quicksilver 10W-30 4-Stroke Marine Engine Oil, Quicksilver premium oil filter, drain plug seal and funnel.
  • Quicksilver 4-Stroke Marine Engine Oil is formulated with advanced corrosion inhibitors and provides outstanding lubricity to reduce wear, scuffing and scoring for improved long-term engine reliability.
  • Quicksilver oil is certified for use in all leading marine brands.
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock