Reviews Manual Powder Coating Plant

DoubleWood 2PCS Plant Stake Support Green Half Round Plant Support Ring Metal Garden Plant Stake, Plant Support for Tomato, Hydrangea, Rose, Vine (2 Packs- 9.8' Wide ×15.6' High)

  • Smart Half Round Design: half round deisgn make it easy to fit around the plants, just attach 2pcs together to support your plant. Effective at supporting plants up to 3 foot..
  • Widely Used: 25 cm/9.8 inch wide, 40 cm/15.6 inch high, can fit most bushy plants like hydrangeas, roses, peonies, salvias, cone flowers, etc. tomato plants and vine plants like cherry tomato, etc. Also can be used as border to keep pathways open in your garden..
  • Sturdy material and powder coating: This half round plant support stakes built thicker & stronger to last longer with powder coating, powder coating will last long time even using under sun and rain..
  • Natural Apperance: Garden green color allows the support to be invisible in the garden..
  • What you get: 2 pieces half round plant support stakes..
Check Stock

Mophorn 40W 50L Electrostatic Powder Coating Machine with Spraying Gun Paint 550g WX-101 Powder Coating System (40W 50L)

  • High Efficiency Powder Coating System: The electrostatic powder coating system machine is designed for DIYers and handy persons. Perfect for spraying big projects like a ship, bridge, hardware, garage, fitness equipment, and more. It features two interior gas designs so that the needle is no longer needle-guided fluid powder to enhance the discharge effect and improve the powder's rate..
  • Simple Control Panel: Each function is clearly labeled, so you can conveniently adjust the powder, air, rinsing air, electrostatic through the knobs. The rinsing air can clean the machine and extend the service life. It is also easy to operate with an OFF/ ON switch. This control panel ensures the perfect spray effect and satisfies your work's various needs..
  • Powder Coating Gun: This Coating machine features a strong electrostatic spraying effect, providing a consistent and smooth finish. Meanwhile, it is powder-saving. With different nozzles, you can spray diffusion and fan-shaped coatings. Also, you can adjust the spraying distance by using big or small nozzles..
  • Excellent Quality: The 45L powder bucket adopts high-quality stainless steel.
  • it has rust prevention and corrosion resistance advantages. Large capacity supports uninterrupted work. Its thickened construction....
Check Stock

Powder Coating Machine 50W 45L Capacity Electrostatic Powder Coating Machine Spraying Gun Paint 450g Per Minute WX-958 Powder Coating System

  • High Efficiency Powder Coating System: The electrostatic powder coating system machine is designed for DIYers and handy persons. Perfect for spraying big projects like a ship, bridge, hardware, garage, fitness equipment, and more. It features two interior gas designs so that the needle is no longer needle-guided fluid powder to enhance the discharge effect and improve the powder’s rate..
  • Simple Control Panel: Each function is clearly labeled, so you can conveniently adjust the powder, air, rinsing air, kV, uA through the knobs. The rinsing air can clean the machine and extend the service life. It is also easy to operate with an OFF/ ON switch. This control panel ensures the perfect spray effect and satisfies your work’s various needs..
  • Powder Coating Gun: This Coating machine features a strong electrostatic spraying effect, providing a consistent and smooth finish. Meanwhile, it is powder-saving. With different nozzles, you can spray diffusion and fan-shaped coatings. Also, you can adjust the spraying distance by using big or small nozzles..
  • Excellent Quality: The 45L powder bucket adopts high-quality stainless steel.
  • it has rust prevention and corrosion resistance advantages. Large capacity supports uninterrupted work. Its thickened construction he....
Check Stock

Mophorn 50W 45L Electrostatic Powder Coating Machine with Spraying Gun Paint 450g Per Minute WX-958 Powder Coating System (50W 45L)

  • High Efficiency Powder Coating System: The electrostatic powder coating system machine is designed for DIYers and handy persons. Perfect for spraying big projects like a ship, bridge, hardware, garage, fitness equipment, and more. It features two interior gas designs so that the needle is no longer needle-guided fluid powder to enhance the discharge effect and improve the powder's rate..
  • Simple Control Panel: Each function is clearly labeled, so you can conveniently adjust the powder, air, rinsing air, kV, uA through the knobs. The rinsing air can clean the machine and extend the service life. It is also easy to operate with an OFF/ ON switch. This control panel ensures the perfect spray effect and satisfies your work's various needs..
  • Powder Coating Gun: This Coating machine features a strong electrostatic spraying effect, providing a consistent and smooth finish. Meanwhile, it is powder-saving. With different nozzles, you can spray diffusion and fan-shaped coatings. Also, you can adjust the spraying distance by using big or small nozzles..
  • Excellent Quality: The 45L powder bucket adopts high-quality stainless st....
Check Stock

Achla Designs FB-33 Argyle IV Wrought Iron Plant Stand, 24\ H, Graphite

  • Sturdy construction– The tops of these standing plant holders have a simple argyle crossbar pattern. With straight legs, They are sturdy enough to hold even large pots..
  • Graphite Powder coated finish – These metal plant stands have a Graphite powder coated finish, giving them a clean, modern look. The powder coating results in a high-quality finish that has the look of natural iron but is more durable and resistant to weather. This sleek Graphite finish will look great in any area of the home, yard, porch, patio, or garden..
  • Multiple sizes – These flowerpot stands are available in four different sizes. Create a tiered grouping of plants with varying heights. Lift plants just off the floor or up to windowsill Height. Tallest argyle stand IV, FB-33 has a 12-in diameter top, 17 ¼ -in diameter base and stands 24-in H..
  • Hand-forged wrought-iron stands – all of our decorative plant stands are handmade using fine wrought iron. Our in-house design team brings together varied expertise in the fields of mechanical engineering, architecture, fine art, sculpture, and metallurgy. This expertise results in high-quality, beautiful plant stands. Since our products are hand forged, exact dimensions may vary slightly..
Check Stock

iDavosic.ly 5 Tier Metal Plant Stand Shelf for Indoor Outdoor, Rustproof Corner Flower Pot Holder Stand, Multi-tier Foldable Planter Rack Display Shelves for Patio Living Room Balcony Office (White)

  • ... flower stand. The nesting display stand is space saving when stack the three together in the corner. Size information, L: 27.75in(H) *12.60(W). M: 23.82in(H) *11.02(W). S: 19.88in(H) *9.45(W).
  • 【Easy to Set Up】 The plant stand outdoor can be quickly assembled with a simple wrench within half an hour.
  • The powder coating smooth surface are easy to maintain with a clean cloth.
  • 【Durable Material】 The modern plant stand is made of heavy duty metal. Wear-resistant powder coating ensure the plant rack waterproof and rustproof for durability, and can safely hold things weighing up to 50 lb.
  • 【Lightweight and Portable】 The lightweight structure makes these plant stands more easy to move and it is portable after disassembly and put into a box to carry outdoor indoor. If there are children or pets at your home, please put them against the wall or you can also put flower pots on the bottom layer to avoid tipping caused from accidental collision.
Check Stock

Achla Designs FB-32 Argyle III Wrought Iron Plant Stand, 18\ H, Graphite

  • Sturdy construction– The tops of these standing plant holders have a simple argyle crossbar pattern. With straight legs, They are sturdy enough to hold even large pots..
  • Graphite Powder coated finish – These metal plant stands have a Graphite powder coated finish, giving them a clean, modern look. The powder coating results in a high-quality finish that has the look of natural iron but is more durable and resistant to weather. This sleek Graphite finish will look great in any area of the home, yard, porch, patio, or garden..
  • Multiple sizes – These flowerpot stands are available in four different sizes. Create a tiered grouping of plants with varying heights. Lift plants just off the floor or up to windowsill Height. Medium argyle stand III FB-32 has a 10 ½ -in diameter top, 14 ½ -in diameter base and stands 18-in H..
  • Hand-forged wrought-iron stands – all of our decorative plant stands are handmade using fine wrought iron. Our in-house design team brings together varied expertise in the fields of mechanical engineering, architecture, fine art, sculpture, and metallurgy. This expertise results in high-quality, beautiful plant stands. Since our products are hand forged, exact dimensions may vary slightly..
Check Stock

Achla Designs FB-20 Tulip Wrought Iron Plant Bowl Stand, Roman Bronze

  • ...ne has an open top so that flowerpots can rest against the four legs of the stand. Another model has a removable metal insert on which you can set flowerpots and other planters..
  • BRONZE POWDER COATED FINISH – These metal plant stands have a Roman bronze powder coated finish, giving them a cute, modern look. Powder coating results in a high-quality finish that is more durable and resistant to scratching than regular liquid paints. This sleek bronze finish will look great in any area of the home, yard, porch, patio, or garden..
  • TWO-TIERED CONSTRUCTION – These tulip-shaped plant stands have two tiers on which you can set flower pots and planters. The upper level has a 15-inch diameter and can hold a large pot, planter, or even a bird bath when used without the insert. The bottom level is close to the floor and can be used for a smaller pot or planter. The stand is 28.5 inches tall..
  • HAND-FORGED WROUGHT-IRON STANDS – All of our decorative plant stands are handmade using fine wrought iron. Our in-house design team brings together varied expertise in the fields of mechanical engineering, architecture, fine art, sculpture, and metallurgy. This expertise results in high-quality, beautiful plant stands. Since our products are hand forged, exact dimensions ....
Check Stock

Achla Designs Flowers Plant Stand, 16 1/2-in H

  • ...tive cross bars have a flat surface. The stands have four straight legs and curled feet. Made from fine wrought iron, the stands are sturdy enough to hold even large pots..
  • ROMAN BRONZE POWDER COATED FINISH – These metal plant stands have a Roman bronze powder coated finish, giving them a cute, modern look. Powder coating results in a high-quality finish that is more durable and resistant to scratching than regular liquid paints. This sleek bronze finish will look great in any area of the home, yard, porch, patio, or garden..
  • AVAILABLE IN THREE SIZES – These flower pot stands are available in three sizes. The smallest size is 12 inches tall and has a diameter of 9.5 inches. The mid-sized stand is 16.5 inches tall and has a diameter of 11.5 inches. The largest stand is 24.75 inches tall and has a diameter of 14.5 inches. The three sizes look fantastic when placed near each other as a set..
  • HAND-FORGED WROUGHT-IRON STANDS – All of our decorative plant stands are handmade using fine wrought iron. Our in-house design team brings together varied expertise in the fields of mechanical engineering, architecture, fine art, sculpture, and metallurgy. This expertise results in high-quality, beautiful plant stands. Since our products are hand forged, exact di....
Check Stock

Achla Designs VTT-02 Triangular Trivet Wrought Iron Plant Stand, Graphite

  • ... stands are part of our Williamsburg Collection. They have straight legs and are sturdy enough to hold even large pots. You can use them to bring potted plants closer to a window..
  • GRAPHITE POWDER COATED FINISH – These metal plant stands have a graphite powder coated finish, giving them a cute, modern look. Powder coating results in a high-quality finish that is more durable and resistant to scratching than regular liquid paints. This sleek graphite finish will look great in any area of the home, yard, porch, patio, or garden..
  • ROUND OR TRIANGULAR DESIGNS – These flowerpot stands are available in two different designs, one round and the other triangular. The round stand is 14 inches tall and has a diameter of 12 inches. The triangular stand is slightly smaller, with a height of 12 inches and sides that are 12 inches in length. The two stands look fantastic when placed near each other or used independently..
  • HAND-FORGED WROUGHT-IRON STANDS – All of our decorative plant stands are handmade using fine wrought iron. Our in-house design team brings together varied expertise in the fields of mechanical engineering, architecture, fine art, sculpture, and metallurgy. This expertise results in high-quality, beautiful plant stands. Since our products are ha....
Check Stock