Reviews Manual Brake Pad Gauge

ITEQ Brake Lining Thickness Gauge 8 Piece SAE & Metric Steel Constructions

  • Color coded brake pad gauge to identify thickness level ranges for brake lining inspection.
  • The brake measuring tool can be used to quickly gauge any vehicle including trucks and heavy duty transportation.
  • Set of 8 gauges denoting 3 thickness levels: Green, Yellow & Red, which indentify if the brakes are still good (Green), should be serviced (Yellow) and must be serviced (Red).
  • Each gauge blade has both Metric & SAE: 3 green (12, 10, 8 mm & 0.4724, 0.3937, 0.3150 inch), 3 yellow (6, 5, 4 mm & 0.2362, 0.1969, 0.1575 inch), and 2 red (3, 2 mm & 0.1181, 0.0787 inch).
  • Constructed out of steel with powder coat riveted together for extra strength and durability.
Check Stock

Kiene K-1390 Brake Lining Gauge

  • Quality: Made of premium plastic, not easy to fade, durable to use..
  • Range: Brake gauge sizes range from 2mm to 12mm..
  • Clear and Accurate Marks: Codes are clearly marked on the gauges, providing accurate depth readings..
  • Easy to take along: The gauges are small in size, you can take it in your car or toolbox, would not take up too much space..
  • Package Include: 1 x Brake Pad Thickness Gauge..
Check Stock

Thorstone Brake Bleeder Kit with Hand Held Vacuum Pump Tester | 16pcs Brake Clutch Bleeder Tool with Adapters for Car Kitchen Uses | One-Man Brake Bleeding System Apply to Bike, Motorcycle, Car, Truck

  • 2-IN-1 TOOL SET - This one-man manual brake bleeding kit enables you to bleed brakes, test vacuum readings through the pressure gauge, and pump out oil, power steering fluids, and many other fluid types. Can be used on brake and clutch wheel cylinder/caliper, master or slave cylinder. To flush old brake fluid and air, and guide the new fluid to fill the brake system..
  • VACUUM SYSTEM TESTER - A manual pump with vacuum gauge could be widely used in testing vehicle vacuum system/household kitchen vacuum sealer to seal food jar, ball jar and vacuum bag. Test and diagnose a wide variety of parts and common systems on your bike motorcycle truck pickup or any other vehicle. Equipped with vacuum gauge, convenient readout of pressure, pressure range: 0-30inHg, 0-760mmHg..
  • HIGH DURABILITY & SEALING - Pressure-proof stalinite which is stronger than normal material. The metal parts are made of alloy and copper, with strong corrosion-proof performance. Our tubes are made from premium PVC for high resilience, heat resistance, and maximum sealing performance. Brake bleeding of each wheel takes less than 5 minutes with great ease..
  • COMPLETE ACCESSORIES - Include vacuum pump with gauge, 4.5oz reservoir jar, 3 transparent hoses, 6 adapters, 2 connectors and a blow mold ca....
Check Stock

Fowler 74-150-020 EZ-Drum Electronic Brake Drum Gage

  • Central Tools-Brake Fforcee Rotor Gauge-Digital accuracy with Swiss electronics.-Drum gages have selectable depth stops to reduce measuring errors.-Pointed Aanvill measure scored or unscored surfaces.-Show customers why their rotors or drums need replacing or turning.-Rotor gages have depth rods to check pad and shoe wear.-Specifications:.
Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

Tire Tread Depth Gauge, Preciva Large LCD Digital Tire Tread Depth Gauge Tool with Two Modes INCH and MM Conversion of 0-1Inches/0-25.4mm (NO 32nds).

  • [INCH/MM Measurements Conversion]: Display can be switched between inch and mm. The measuring range is 0-1inches/ 0-25.4 mm. ( NO Fractions, NO 32nds).
  • [Upgraded Large LCD Screen]: Digital tire depth gauge with updated large LCD display screen. Easy to read. Make the reading more clearly..
  • [Easy for Operating]:Zero Button for Zero setting at any position. Comes with a Power ON/OFF Button, Manual power on / off, Sturdy plastic housing..
  • [Widely Application]: Used for measuring tread depth, brake shoe and pad wear. Suitable for various vehicles, like car, truck, motorcycle, and bus..
  • [What You Will Get]: There are one LCD tire tread depth gauge comes with one battery(1.5v LR44 battery) inside the gauge. And also comes with an extra spare LR44 battery..
Check Stock

ABN Brake Drum Tool Kit 15-Piece Service Brake Kit with Spring Pliers Brake Spoons Pad Gauge Brake Spring Tool

  • PROFESSIONAL GRADE AUTOMOTIVE TOOLS: The ABN 15-piece Drum Brake Service Kit is designed to allow you to remove and replace worn and broken brake parts and to make it easier to reach other parts.
  • These rear brake tool sets are designed to be used on most foreign and domestic cars and trucks.
  • SERVICE YOUR VEHICLE BRAKES: Whether you are a seasoned mechanic or a home mechanic, this automotive tool set allows you to service your vehicle brakes by making it easy to replace springs, check your pads, and reach other parts of the drum brake system.
  • EASY TO USE: The spring installer, remover, and retainer tools help to adjust brake springs safely to get to deeper parts of your brake system while the various adjustment spoons help you adjust clearance between the drum brake and brake shoe.
  • The 8 brake lining thickness gauges help you to identify thickness levels to know when its time to change your pads.
  • BUILT TO LAST: Constructed of heavy-duty metal, these brake tools are designed for durability and longevity.
  • Each standard sized brake adjusting tool has a chrome finish to protect from rust and corrosion.
  • The spring puller tool, spring installation tool, and spring retainers have ergonomic handles for comfort when using.
Check Stock

Preciva Tire Tread Depth Gauge Digital Tire Gauge Meter Tester with Large LCD Screen of F/mm/inch Conversion for Cars Trucks and SUV

  • [Fraction/INCH/MM Measurements Conversion]: Display can be switched between inches and mm and Fractions..
  • [LCD Screen]: Digital depth gauge with large LCD display..
  • [Easy for Operating]: Zero setting at any position, Measuring range: 0-25.4mm.
  • [Widely Application]: Suitable for tread depth, brake shoe and pad wear..
  • [Power ON or OFF Button]Manual power on / off,Sturdy plastic housing.
Check Stock

Cimeton 16Pcs Tire Tread Depth Gauge Set with Digital Tire Tread Depth Gauge, Brake Lining Thickness Gauge Set and 10Pcs Valve Cores and 2Pcs Tire Pressure Gauge for Cars SUVs Trucks

  • QUICK AND EFFICIENT READING – The brake thickness gauge allows you to quickly measure the external & internal brake pads to help identify if a vehicle has a sufficient amount of brake pad lining.
  • COLOR CODE INDICATOR SCALE – Designed with an easy-to-use and readable color code scale – Red = Replace, Yellow = Caution, Green = Safe which allows the user to quickly check brake thickness levels in a safe manner..
  • 8 PIECE SAE & METRIC GAUGE – 8 piece swatch style drum brake gauges are designed to help determine the level of wear to the brake lining of the vehicles in the following Metric/SAE sizes: 2mm (0.0787 inches), 3mm (0.1181 inches), 4mm (0.1575 inches), 5mm (0.1969 inches), 6mm (0.2362 inches), 8mm (0.3150 inches), 10mm (0.3937 inches), and 12mm (0.4724 inches)..
  • DURABLE AND LIGHTWEIGHT STEEL DESIGN – Constructed to be compact and calibratable for portable ease and to ensures long-term performance and durability of both the tool and your brake pads..
  • APPLICATION – Ideal for use with any vehicle.
  • standard and heavy-duty transportation vehicles..
Check Stock

Tire Tread Depth Gauge, Preciva LCD Digital Tire Tread Depth Gauge Tool with Inch and MM Conversion of 0-0.98 Inches(NO Fraction Display/ NO 32nds).

  • [INCH & MM Measurements Conversion]: Display can be switched between inches and mm( NO Fractions)..
  • [LCD Screen Display]: Digital depth gauge with large LCD display. give you clear reading..
  • [Easy for Operating]: Zero setting at any position, Measuring range: 0-25.4mm, 0-1inch..
  • [Widely Application]: Suitable for tread depth, brake shoe and pad wear..
  • [Power ON & OFF Button]: Manual power on / off, Sturdy plastic housing..
Check Stock