Reviews Manifold For Floor Heating

Remflex 2006 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-3/8 inch width x 1-1/2 inch width Square Port - Matches the Stock cast iron Head Port.
  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Port, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1404.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

WarmlyYours TRT120-KIT-OT-1.5x21 32 sq. ft. Electric Heating Roll Kit with Touch Screen Thermostat, Circuit Check and Floor Sensor, Use under Tile, Marble, Vinyl or Stone (120V)

  • TEMPZONE ELECTRIC RADIANT FLOOR HEATING FLEX ROLL: WarmlyYours TempZone Electric Radiant Floor Heating Flex Roll is perfect for installation underneath ceramic tile, natural stone, nailed hardwood, wood, and other popular flooring materials, this cut-and-turn 32 sq. ft. roll consists of a heating cable secured with double-sided tape onto a fiber-glass mesh, and the heating cable is distributed in serpentine 3″ apart loops, which helps deliver even heating throughout flooring areas, with a 1/8″ low profile twin conductor, 1 return lead, fits any room shape without significantly raising the floor height.
  • nSPIRE TOUCH PROGRAMMABLE THERMOSTAT: This dual voltage (120V/240V) thermostat comes with energy log for tracking use and built-in self-testing GFCI, features “Child-Lock” function and a 3.5” full color touchscreen, complimentary floor sensor allows for energy efficient operation of your floor heating system, with the ability to set up 4 separate temperature events per day and the integrated install wizard, lets you customize your comfort while cutting down on operating cost.
  • CIRCUIT CHECK: This exclusive Circuit Check was developed by WarmlyYours for use in monitoring the floor heating system before, during and after installa....
Check Stock

Floor Heater

  • LUXURY AND COMFORT - Enjoy the Warmth of LuxHeat's easy-to-install Electric Floor Heating System. Heating Kit Includes: 100 Sqft (120 volt) Self-Adhesive Heating Mat, Cable monitor/Alarm, OJ Microline UDG4-4999 Programmable Thermostat with Floor Sensor and Built-in GFCI (Ground Fault Protection). For installation under Tile, Laminates and more..
  • EASY TO INSTALL - The 3" Pre-spaced Electric Floor Heating Mat can be cut & turned, flipped or rotated - providing warmth where needed. With Self-adhesive mesh on one side and double sided tape on the other, the mat adheres to the sub-floor and lays flat even when flipped. DO NOT CUT or shorten red heater wire. Heating wires MUST be embedded in a self-levelling underlayment, thinset or mortar..
  • QUALITY & EXPERIENCE - With an overall experience of 50 years in the floor heating industry, the LuxHeat team offers a wide range of heating products backed by unparalleled customer service. The LuxHeat 25 Year limited warranty provides peace of mind and assurance of performance for many years to come..
  • OJ MICROLINE'S UDG4-4999 TOUCHSCREEN PROGRAMMABLE THERMOSTAT -....
Check Stock

Floor Heater

  • LUXURY AND COMFORT - Enjoy the Warmth of LuxHeat's easy-to-install Electric Floor Heating System. Heating Kit Includes: 200 Sqft (240 volt) Self-Adhesive Heating Mat, Cable monitor/Alarm, OJ Microline UDG4-4999 Programmable Thermostat with Floor Sensor and Built-in GFCI (Ground Fault Protection). For installation under Tile, Laminates and more..
  • EASY TO INSTALL - The 3" Pre-spaced Electric Floor Heating Mat can be cut & turned, flipped or rotated - providing warmth where needed. With Self-adhesive mesh on one side and double sided tape on the other, the mat adheres to the sub-floor and lays flat even when flipped. DO NOT CUT or shorten red heater wire. Heating wires MUST be embedded in a self-levelling underlayment, thinset or mortar..
  • QUALITY & EXPERIENCE - With an overall experience of 50 years in the floor heating industry, the LuxHeat team offers a wide range of heating products backed by unparalleled customer service. The LuxHeat 25 Year limited warranty provides peace of mind and assurance of performance for many years to come..
  • OJ MICROLINE'S UDG4-4999 TOUCHSCREEN PROGRAMMABLE THERMOSTAT -....
Check Stock

LuxHeat 200 Sqft Heating Mat, 240v Electric Radiant Floor Heating System with Self-Adhesive Mesh for Easy Installation Under Tile, Underfloor and Infloor - Includes Floor Sensor for Thermostat

  • LUXURY AND COMFORT - Enjoy the warmth of LuxHeat's easy to install electric floor heating system. Your purchase includes a 200sqft (240 volt) Heating Mat plus Floor Sensor (Excludes Thermostat). The LuxHeat floor heating system allows for individual room control, ensuring personal comfort..
  • QUICK AND EASY TO INSTALL - The pre-spaced electric floor heating mat reduces installation time by up to 75% when compared with conventional loose-lay cable systems. Ideally suited for installation Under Tiles, Laminate and more. Heating wires must be embedded in a Self-leveling underlayment, thinset or mortar..
  • VERSATILE - The combination of self-adhesive mesh and double-sided tape allows for the mesh to be cut and flipped or rotated, providing warmth where its needed. Heating wires can also be removed from the mesh to help get into those difficult to reach areas. DO NOT CUT or shorten heater wire..
  • QUALITY & EXPERIENCE - With an overall experience of 50 years in the floor heating industry, the LuxHeat team offers a wide range of heating products backed by unparalleled customer service. The LuxHeat 25 Year limited warranty prov....
Check Stock

Turn Up The Heat - Dance Floor Grinding Secrets

  • LUXURY AND COMFORT - Enjoy the Warmth of LuxHeat's easy-to-install Electric Floor Heating System. Heating Kit Includes: 2x 120volt Self-Adhesive Heating Mats (Totaling 150sqft), 2x Cable Monitors/Alarms, 1x OJ Microline UDG4-4999 Programmable Thermostat with Floor Sensor and Built-in GFCI (Ground Fault Protection). For installation under Tile, Laminates and more..
  • EASY TO INSTALL - The 3" Pre-spaced Electric Floor Heating Mat can be cut & turned, flipped or rotated - providing warmth where needed. With Self-adhesive mesh on one side and double sided tape on the other, the mat adheres to the sub-floor and lays flat even when flipped. DO NOT CUT or shorten red heater wire. Heating wires MUST be embedded in a self-levelling underlayment, thinset or mortar..
  • QUALITY & EXPERIENCE - With an overall experience of 50 years in the floor heating industry, the LuxHeat team offers a wide range of heating products backed by unparalleled customer service. The LuxHeat 25 Year limited warranty provides peace of mind and assurance of performance for many years to come..
  • OJ MICROLINE'S UWG4-4999 WiFi PROGRAMMABLE ....
Check Stock