Reviews Makita Impact Xps Phillips

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

Power Wheels Adapter for Makita 18V battery Dock Power,Makita 18V Dock Power Adapter with 12 Gauge Wire,Good Power Convertor for DIY Ride On Fan Truck Robotics RC Toys and Work Lights

  • Fully Applicable: 100% compatible with Makita 18v, our battery power connector fits your battery perfectly, and you can easily install and lock your....
  • Good Quality: Makita 18v battery dock adapter was made of good ABS plastic. Strong,Heat resistant,impact resistance,moisture resistance..
  • Easy to install: Makita 18V battery adapter can lock your battery well. Just move the power installation connector gently to the inside of the groove,....
  • Creativity & Entertainment: Power Wheel Adapter has installed 12 gauge wire.Enjoy yourself in DIY! Good Power Convertor for DIY Ride On Fan, Truck,....
  • Warning: Work with Makita 18v Li-ion Battery Only.Please check if it fits your battery before buying.Compatible with Makita BL1830 BL1840 BL1850....
Check Stock

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills.
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/an....
Check Stock

INTOO Drill Bit Set 21 Piece 1/16'-1/2' Quick Change Impact Driver Bit Set

  • Specifications: 21pcs titanium drill bits set, include 1/16X2,5/64X2,3/32X2,7/64X2,1/8X2,9/64,5/32,11/64,3/16,13/64,7/32,15/64,1/4,5/16,3/8,1/2 with 1/4 hex shank.
  • Highlights: Special plug hex shank of quick change drill bit is an upgrade version, it shows excellent performace than normal pressed hex shank, avoid drills peeling from the hex shank, effectively keep hex shank locked with drill bits during impact drilling process..
  • Characteristics:135° split point not only promises cutting speed,but also prevents slipping when start drilling；Titanium coating increases the ware-resistance and durability, effect long life drilling. Non-disposable packing makes sure the drills well stored..
  • Quick change: 1/4 inch hex shank of hex bit set well fits all power tools,especially for locking into quick change chucks,suitable for makita drill and makita impact driver, dewalt drill bits set,milwaukee drill bit set,effects quick change more easily and securely..
  • Widely used: industry grade high speed steel drill bit sets with high hardness, can be widely used in Steel, Wood, Plastic, etc. Ideal for DIY, home and general building/engineering using.Ideal impact drill bit set and drill bits for metal..
Check Stock

Makita XT505 18V LXT® Lithium-Ion Cordless 5-Pc. Combo Kit (3.0Ah)

  • Variable 2-speed 1/2" Hammer Driver-Drill (0-600 & 0-1,900 RPM) with Makita-built 4-pole motor delivers 480 in.lbs. of Max Torque.
  • Variable speed Impact Driver (0-2,900 RPM & 0-3,500 IPM) provides 1,460 in.lbs. of Max Torque.
  • Variable speed Recipro Saw delivers 0-2,800 strokes per minute with a 1-1/4" stroke.
  • Makita XT505 18V LXT Lithium-Ion Cordless 5-Pc. Combo Kit (3.0Ah).
Check Stock

EOTECH XPS2-SAGE Holographic Weapon Sight

  • EOTECH XPS2-SAGE - Holographic Weapon Sight in black with SAGE less-lethal reticle (68MOA ring & 1 MOA dot).
  • SAGE Reticle - The SAGE reticle pattern combines a targeting and ranging reticle in one image. The multipurpose image is calibrated to the specific trajectory of Sage’s KO line of less-lethal impact munitions.
  • Mount - Compatible with both 1" Weaver and MIL-STD 1913 Rails.
  • Adjustable Brightness - The XPS2-SAGE has 20 brightness settings for use in any lighting scenario.
  • EOTECH HWS Prestige Warranty - Comes with a 10 year limited warranty.
Check Stock

Wera - 5134929001 Series 4 851/4 A Special Design Bit, Phillips PH 0 x 50mm Blade (Pack of 10)

  • Features Wera's Extrahard design, for Phillips screws, PH 0 x 50mm blade x 1/4" drive.
  • For hexagon bit holders and direct drives.
  • For AEG, ARO, Atlas-Copco, Biax, Black & Decker, Bosch, Buckeye-Tools, Chicaco Pneumatic, Cleco, Deprag, Desoutter, Gardner-Denver, Hios (Ferra-Tools), Hitachi, Ingersoll-Rand, Iwema (Fuji Air Tools), Keller, Makita, Mall, Metabo, NPK-Air Tools, Pneutec, Rockwell, Rotor Tool, Skil Tool, Stanley, Thor Power-Tool, Tohnichi, Uryu (UPT-Weiler), Van Dorn, Virax, and Wolf hexagon drives.
  • Wera Extra hard bits for soft materials (e.g. wood and general construction materials) are made from a special material that extends the tools' service life and reduces the risk of material damage.
Check Stock

JIS Impact Driver Bit Set PH2 PH3 Short Long For Japanese Standard Screws 4pc

  • Japanese JIS Screwdriver Impact driver bits.
  • Hardened tips for strength and durability.
  • JIS impact driver bits will also work with Phillips screws.
Check Stock

Creabest 14.4V 3.5Ah Ni-MH Replacement Battery Compatible with makita 1434 1420 1422 1433 1435 1435F 192699-A 193158-3 192600-1 1051D 4033D Power Cordless Drill Tools

  • Brand New, High quality Ni-MH Cells, 14.4 Volts, 3500mAh, 100% compatible with originals charger DC1804, DC7100..
  • Compatible with Makita 14.4V battery, Makita PA14, 1420, 1422, 1433, 1434, 1435, 1435F, 192600-1, 193985-8, 192699, 193157-5, 193158-3, 1051D, 4033D..
  • 14.4v Replacement Battery for Makita 1000 Series, Makita 4000 Series, Makita 5000 Series, Makita 6000 Series, Makita 8000 Series, Makita JR Series,....
  • Makita 14.4v battery are FCC, CE and RoHS certified, No memory effect, no pollution, and low self-discharge, can be charged or discharged as needed....
  • Guarantee: we provide 30 days full refund or replace, 24 hours warmly service..
Check Stock

Leviton 1451-2IM 15 Amp, 120 Volt, Toggle Framed Single-Pole Ac Quiet Switch, Residential Grade, Grounding, 10-Pack, Ivory

  • Faster installation with combination of side wiring and quick wire push in wiring.
  • Terminal screws accept up to No.12 AWG copper or copper clad wire.
  • Quickwire push in terminals accept No.14 AWG solid copper wire only.
  • Large triple combination screws Robertson/Phillips/Slotted for fast wiring.
  • Impact resistant, durable thermoplastic toggle and frame.
  • Faster installation with combination of side wiring and Quickwire push-in wiring^Terminal screws accept up to No. 12 AWG copper or copper-clad wire^Quickwire push-in terminals accept No. 14 AWG solid copper wire only^Large triple combination screws Robertson/Phillips/Slotted for fast wiring^Impact-resistant, durable thermoplastic toggle and frame.
Check Stock