Reviews Mainconnecting Bearing

OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black

  • EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
  • SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
  • You can save hundreds of dollars by using this one pilot puller.
  • VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
  • This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
  • DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
  • This blind hole bearing puller is built to last.
  • DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.
Check Stock

Spicer 5-460X U-Joint Kit 1310 to 1350 Series (OSR)

  • Spicer greaseable universal joint with snap rings.
  • Bearing Cap Diameter (1): 1.062 inches / Bearing Cap Diameter (2): 1.188 inches.
  • Bearing Cap to Bearing Cap (1): 3.219 inches / Bearing Cap to Bearing Cap (2): 3.625 inches.
  • Outside to outside dimension: 3.219 inch.
Check Stock

Detroit Axle - 2WD Only 6-Lug Front Wheel Bearing Hub Assembly for - 2WD Only 2000-2006 Silverado 1500, Sierra 1500, Yukon No Denali or Z71 - Driver Passenger

  • Front Wheel Bearing Hub Assembly 6-lug 2-pc Set For 2WD/RWD Models Only! This Front End Service Kit Contains A Front Left Wheel Hub, Front Right Wheel Hub, And Front Wheel Bearings To Complete A Wheel Bearing Hub Assembly Front Kit. This Wheel Hub Kit Is Also Known As A Front Wheel Assembly, Wheel Hubs Assembly, Front Assembly, Front Hub Bearing Assembly, Left Front Hub Assembly, Wheelbearing And Hub Assembly, Wheel Hub Assemblies, Wheel Hub Front, And A Front Hub Bearing Assembly Pair..
  • Hub Specification: Lugs:6 | Flange Type: 3-Bolt Triangular | ABS Type: Sensor Wire.
  • Replacement Hub And Wheel Bearing Assembly For 2WD Chevrolet Silverado 1500 1999 2000 2001 2002 2003 2004 2005 2006 2007. Chevy Suburban 1500 2000 2001 2002 2003 2004 2005 2006. Chevrolet Tahoe 2000 2001 2002 2003 2004 2005 2006. The Parts In This Kit Are Direct Replacements For Chevy Silverado Wheel Bearing, Silverado Front Wheel Bearing, Silverado Wheel Hub, Tahoe Hub Assembly, Chevy Tahoe Wheel Bearing, Wheel Hub Assembly Silverado, Suburban Wheel Bearing, And A Chevy Tahoe Hub Assembly..
  • Replacement Wheel Hub And Bearing Assembly Front For 2WD Cadillac Escalade Esv Ext 2002 2003 2004 2005 2006. Gmc Savana 2500 2003 2004 2005. Gmc Sierra 1500 1999 2000 2001 2002 2003 2....
Check Stock

20 Pack 608 ZZ Ball Bearing Size Precision of 8 x 22 x 7 mm Double Sealed Miniature Bearing-Steel Deep Groove 608zz Bearings for Skateboards Inline Skates Scooters 3D Printers

  • Sturdy Chrome Bearing Steel Material: This 608zz bearing is made of more robust & higher purity bearing steel, which has higher and uniform hardness....
  • More Size Accuracy: Bearing Steel guarrantees the 608ZZ bearing with more accurate size and less allowable tolerance, giving 8 x 22 x 7 mm for ball....
  • High Wear Resistance: Bearing steel keeps the bearing works smooth and flat，sealed bearings are lubricated with oil or grease in the bearing....
  • Great Rust-Proof Quality: The material of bearing steel makes the bearing have good anti-rust performance in use..
  • Multi-Purpose: This 608 bearing is ideal for moderate load uses: skateboards, inline skates, scooters, roller skating, longboard, roller blade, etc..
Check Stock

CMTOOL Bearing Puller 3 Jaw Pilot Bearing Puller Blind Bearing Puller Set Bearing Pullers Bushing Gear Puller Small Inner Internal Bearing Puller Kit Car Motorcycle Wheel Pilot Bearing Removal Tool

  • 【Widely Used 3 Jaw Bearing Puller】This 3 jaw pilot bearing puller is widely used in automobile bearings, motorcycle electric car bearings, mechanical bearings, agricultural machinery etc. This bearing puller is easy to operate, easy to use and durable..
  • 【Excellent Design】The bearing puller group adopts a three-jaw design. The three-jaw design can apply uniform pressure, which can effectively prevent slippage and bearing damage, and ensure the bearing puller stability during use. The forged and heat-treated steel jaws in the bearing puller are coated with a corrosion-resistant coating to make them more durable..
  • 【High-Quality Pilot Bearing Puller】 The inner bearing puller is made of high-quality carbon steel through forging and special heat treatment process, so that our bearing puller has high strength, toughness and longer service life..
  • 【Strong 3 Jaw Bearing Puller】 The internal bearing puller has a sturdy structure, high-strength torque and high toughness. As long as the small wrench is turned slightly, it will generate a large pulling force, which can be slip-resistant and firmly grasped, saving time and saving when using (claw length 80 mm).
  • 【Precautions】 The claws of the bearing puller have positive and negative installation met....
Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

  • 【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
  • 【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
  • Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
  • Repeat action until the bearing or bushing has been removed.
  • U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
  • 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
  • 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Check Stock

Premium 1 Ounce Skateboard Bearing Lubricant | Bearing Oil, High Grade Skate Bearing Lubricant, Super Smooth Bearing Lube for Skateboards, Longboards, Scooters and Roller Skates

  • 【HIGH QUALITY】This grade-A skateboard bearing lubricant is specially designed for skateboards. This Bearing Oil has low viscosity and superior lubrication effect. Only 1-2 drops can lubricate the entire bearing..
  • 【ACCURACY & SAFETY】The precision APPLICATION NEEDLE of our skateboard bearing lubricant makes you get accurate use without making a mess. The skate bearing lubricant is equipped with a CHILD SAFETY BOTTLE CAP, which can never be opened by babies and toddlers..
  • 【EXTENDS BEARING LIFE】This bearing lube for skateboards can quickly penetrate into the bearing to play a role of lubrication and rust prevention. Protect bearings from wear and tear, greatly extend bearing life and make your bearings faster..
  • 【FULLY COMPATIBLE】Our bearing oil is suitable for most skateboard brands and skateboard types, including longboards, skateboards, scooters and roller skates..
  • 【100% CUSTOMER SATISFACTION GUARANTEE】Order with confidence! Every skateboard bearing lubricant has been tested strictly to ensure higher quality. If you are not completely satisfied with the product, we will give you a full refund..
Check Stock

OEMTOOLS 27119 Bearing and Race Installer Set, Seal Driver Set, Bearing Race Installer, Seal Installation Tool, Bearing Install Tool, Axle Seal Installer

  • ASSIST IN REPAIRS: This bearing race and seal driver set aids in wheel bearing repairs and rotor repairs.
  • Remove and install bearing races of all sizes with bearing driver set.
  • Bearing race punch set helps correct suspension system.
  • PREVENT DAMAGE: The seal installer kit prevents damage to race and axle housing.
  • Don’t have to use a power tool to use this bearing and seal driver.
  • EASY TO USE: The heavy duty seal driver takes minutes to use and saves energy.
  • Race bearing and seal driver set comes with easy instructions.
  • Discs and handles with tool bearing and race installer set can be organized in sturdy carrying case.
  • ADAPTABLE FIT: Bearing installation tool comes with 9 driver discs to fit most standard wheel bearings.
  • Driver discs with set are: 1.565 inch, 1.750 inch, 1.965 inch, 2.325 inch, 2.470 inch, 2.555 inch, 2.830 inch, 2.995 inch, and 3.180 inch.
  • VERSATILE TOOL: Flip discs in bearing pusher over and use to install seals.
  • Bearing and race installer kit is multifaceted.
Check Stock

Wrench Rabbit New Complete Engine Rebuild Kits for Yamaha R Raptor (05-13), YFM 350 X Warrior (87-04) WR101-209 , Black

  • Vertex Piston Kit standard compression piston, rings, pin and clips. Hot Rods Heavy Duty crank stock stroke - includes wrist pin bearing for two strokes. Hot Rods main bearing/seal kit Hot Rods transmission bearing kit includes transmission bearings, output shaft collar and sprocket lock washer. Hot Rods counter balancer bearing. Kit Hot Rods water pump bearing and seal kit. Vertex complete gaskets kit including seals and O-ring kit (covers top and bottom). Hot Cams cam chain..
  • Fit: Convenient one stop shop in a box! Kit contains oversized +0.5mm piston kit, heavy duty crankshaft, main bearing and seal kit, balancer bearing kit, transmission bearing kit, waterpump bearing and seal kit, complete gasket and seal set, and cam chain (if applicable).
  • Meets or Exceeds OEM Specs for Fit and Performance.
Check Stock

OEM TOOLS 27213 Master Wheel Hub & Bearing Remover & Installer Kit Back & Front Wheel Bearing Puller Kit Back & Front Wheel Hub Puller Easy to Use

  • NO SHOP PRESS NEEDED: Remove the need for a shop press with our wheel hub bearing press tool.
  • Save time removing even seized-up wheel hub and bearing....
  • FOR PRO AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing on German....
  • TIME-SAVING BEARING TOOL: No need to remove the strut assembly or knuckle to remove/install the hub and bearing.
  • VARIETY OF ADAPTERS: Service your vehicles easily with our rear and front wheel bearing removal kit.
  • This wheel bearing removal tool features all the....
  • DURABLE STEEL CONSTRUCTION: Our rear and front wheel drive bearing adapter kit's steel design holds up to the torque required to remove hubs and....
Check Stock