Reviews Main Motherboard

X58 PC Motherboard for Intel X58, 2 x DDR3 Motherboard LGA1366 Pins，Gaming Motherboard Support ECC Memory USB2.0 SATA Port Motherboard for Desktop PC

  • 【SUPPORTED DUAL DDR3 MEMORY】 : The main chipset of LGA1366 motherboard adopts for Intel X58, supports 2×DDR3 DIMM memory, and the memory type is DDR3 1866, 1600, 1333MHz. Motherboard Size: Approx. 21.6 x 18.4cm / 8.5 x 7.2in.
  • 【CPU SLOT LGA1366】X58 computer motherboard with CPU slot LGA 1366, support 1 CPU, plug in the power supply, CPU, hard disk, memory, and display to use. X58 motherboard with integrated 6 channel sound card, network card, stable and high-speed transmission..
  • 【ALL SOLIDLY CAPACITOR & Rich EXPANSION SLOT】: All solidly capacitor design, the quality of the power supply cooling block is more stable and durable than ordinary capacitors. Expansion slot: 1xPCIE X16 graphics card slot.
  • 【SATA PORT & I/O INTERFACE】: PC motherboard supports SATA port, Multi I/O interface: PS/2 Interface : PS/2 Keyboard and Mouse General Interface.
  • Audio Interface which is compact and easy to install. It is easy to use and has high compatibility..
  • 【PCB MATERIAL&GUARANTEE】: One 8 pines power socket, one 24 pin power connector, made of high quality PCB material, with high performance and stable performance. This X58 Motherboard LGA1366 ha....
Check Stock

Goshfun Motherboard Kit for Repairing and Upgrading of NERF Modulus Regulator C1295 Regulator

  • The modified body can be refit 12v lithium battery..
  • Since the original main body can not modify aluminum battery after changing the flywheel, it is very limited in performance. After the main board is modified, the main board can withstand the voltage of 12-20v, and the lithium battery can be discharged with large rate, which is convenient for subsequent modification of metal flywheel, flywheel cage and other products.
  • Feature-rich: Single / three / burst mode, dart count, empty magazine on-hook, flywheel instantaneous stop / noise reduction control, voltage display and low voltage prompt.
  • Motherboard kit for repairing and upgrading damaged motherboard of NERF modulus Regulator C1295 REGULATOR.
  • Simple installation: the wire is fixed with screw column, can be installed without welding. Wide voltage operation (6-12V). Can hold for most 2s motor.
Check Stock

BIGTREETECH Direct Octopus V1.1 Silent 32 Bit Control Board 3D + TFT35 E3 V3.0 Two Mode Display Screen 3D Printer Parts for Creality Ender 3/5 CR10

  • 【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz..
  • 【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total.
  • 【Realize Online Printing】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board, to....
  • 【Motherboard Expansion Function】Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U....
  • 【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard.....
Check Stock

LRONG 1PC PC Chassis Fan Hub CPU Cooling HUB Fan PWM Hub SATA Controller Speed Controller

  • 12V 10-way 4pin SATA fan hub, to solve the problem of insufficient motherboard fan ports. The hub has 10 fan ports, can support 10 fans, can meet various host requirements, and supports 3pin/4pin fans..
  • Installation steps: The PWM port is connected to the CPU fan port on the motherboard. The red port is dedicated to the CPU fan. Connect 1 fan to the red portand then connect the rest of the fans. Then you need to connect the fan hub’s PWM cable to the motherboard. Connect the SATA cable to the fan hub..
  • Equipped with PWM cable: The hub is equipped with a PWM cable with a length of 40CM, which can support the back line. After the PWM cable is connected to the main board, the temperature control and speed can be controlled by the main board..
  • Convenient installation: the hub is fixed with 3M glue, and the back of each hub is equipped with an American 3M glue, which can make the hub work well.
  • Package content: 1 X 12V 10-channel 4pin fan hub, 1X PWM connection cable..
Check Stock

X58 PC Motherboard, LGA 1366 Motherboard 2 DDR3, Gaming Motherboard Support ECC Memory USB2.0 SATA Port PCB Motherboard for Desktop Computer

  • 【2×DDR3 MEMORY】: The LGA1366 computer motherboard with main chipset for Intel X58, supports 2×DDR3 DIMM, and the memory type is DDR3 1866MHz, 1600MHz, 1333MHz, support ECC memory..
  • 【LGA1366 CPU Slot】: Desktop motherboard LGA1366 with CPU slot LGA 1366, support 1 CPU, plug in the power supply, CPU, hard drive, memory, and display to use..
  • 【ALL SOLIDLY CAPACITOR】: Computer motherboard with all solidly capacitor design, the quality of the power supply cooling block is more stable and durable than ordinary capacitors..
  • 【SATA PORT】: PC gaming motherboard supports SATA port, which is compact and easy to install. It is easy to use and has high compatibility..
  • 【Stable Power Socket】: Motherboard LGA1366 with one 8 pines power socket, one 24 pin power connector, made of high quality PCB material, with high performance and stable performance..
Check Stock

LGA 775 Motherboard Integrated 6 Channels DDR3 1066/1333MHz for G41 Chipset Desktop Computer 3 in 1 Function of Integrated Graphics Sound Card and Network Card

  • 【LGA 775 DDR3 Motherboard】Professional designed DDR3 motherboard possess dual channel, 2 x DDR3 DIMM, CPU socket LGA 775, Main Chipset For G41,is....
  • 【Integrated G41 Desktop Motherboard】The LGA775 motherboard possess the function of integrated graphics, sound card and network card, Integrated 6....
  • 【Multi Practical Port】Support IDE port, Expansion Slot: 1 x PCI-Ex16 graphics card slot, 1 x PCI slot, 2 x USB2.0 slot, 4 x SATA2.0 interface, 1 x....
  • 【Easy to Install】Made of high-quality materials, come with high performance and stable performance,small in size, easy to install, no other....
  • 【100% Satisfaction Guarantee】This LGA775 Motherboard has a complete after-sales service, If you have any questions about the product or you are....
Check Stock

Creality 48CM TF to Micro SD TF Extension Cable Memory Card Adapter for/Raspberry Pi/Arduino GPS TV SDXC Creality CR10/10S/S4/S5/Ender 3/Ender 3 Pro Monoprice Select Mini 3D Printer

  • 【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz..
  • 【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total.
  • 【Realize Online Printing】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board, to....
  • 【Motherboard Expansion Function】Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U....
  • 【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard.....
Check Stock

SinLoon DB25 to IDC 26 Pin Cable,Motherboard Slot Plate Parallel Panel DB-25 Female to 26 Pin IDC Socket Flat Cable

  • Product Name: Full copper cable core DB25P female to IDC26P female baffle cable.
  • IDC26 to DB25 (Parallel). Female to female connection. Perfect for the SmoothStepper, UC400 and other CNC boards.
  • The DB25 connector also fits directly into the DB25 slot of most cases. Add 1 motherboard cable adapter DB-25 Female to 26 Pin port to your computer,Ensure smooth data flow from your parallel port. This adapter cable connects to the motherboard or I/O adapter via flat ribbon cabling. Compatible with most brands of motherboards and I/O cards. The 11-inch length exceeds the standard length of cables often provided with motherboards, and provides flexibility for your connection..
  • Note:Do not insert the LPT1 pin on the main board. The red side line is the 1st line. The corresponding 1st pin on the main board usually has a red line.003cbr003e The printer port working mode (parallel port mode) in the motherboard BIOS, please set to Normal003cbr003e.
  • Package Content: 1 x DB25 to IDC 26 IDC Socket Flat Cable ,Length Cable : 30cm.
Check Stock

Professional Main Board Motherboard Compatible with Epson L1800 Flatbed Printer

  • Suitable Compatible with printer model: Compatible with Epson L1800.
  • Main board motherboard Compatible with Epson L1800 Flatbed Printer.
Check Stock

Dell Optiplex 760 SFF Motherboard F373D 0F373D

  • Main Logic System Board Assembly Motherboard.
  • Fits DELL Optiplex 760 Small Form Factor SFF Only.
  • Motherboard only. Intel CPU/Memory/Fans NOT included.
Check Stock