Reviews Magnetic Number Plate Holder

Mount Metal Plates Replacement Kits with 3M Adhensive for magnetic Car Mount Phone Holder 4 Pack (2 Rectangle 2 Round)

  • 【4-Pack Replacement Kits】4.5cm*6.5cm rectangular metal plate x 2 Pieces,round metal plate with a diameter of 4cm X 2 Pieces.
  • 【Material】The product is made of high-quality manganese steel material and the matte surface is easier to clean than ordinary ones..
  • 【Thin&Practical】The thickness of the product is only 0.5mm, which is light and practical.The metal plate is very thin and light.3M adhesive works well and is easy to install..
  • 【Use For Magnetic Mount】Metal plate is mainly used for magnetic phone support, it without magnetic.3M adhesive on the back of the sheet metal, used in the fixed plate of the back of the phone..
  • 【Tip】 The metal plate do not with magnetic.The metal plate is design for magnetic car phone holder and can work well for it..
Check Stock

Mengo

  • Universal metal plate: Easy to use with all magnetic car mount holder.
  • Package includes: Rectangle - 1.8" x 2.6" (4Pcs).
  • Strong adhesive: Each metal plate has strong adhesives tape, Easy to stick onto the back of phone or case without a hassle.
  • Wide compatibility: All of the metal plates are not magnetic, we strongly recommend to use these metal plates along with universal magnetic mounts....
  • Important note: Metal plate may disable wireless charging, if you stick it on the back of the phone/case,Suggest to take the case off when use....
Check Stock

TAGVO Phone Ring Holder Finger Ring Kickstand and 3M Sticky Adhesive Replacement Set Including Metal Plates - 360°Rotation Metal Grip Holder for Magnetic Car Mount Compatible with Cell Phone

  • 【Metal Plate with Strong Adhesive】Super thin metal plate is designed to use with magnetic mobile phone car mount, magnetic air vent mount and other magnetic cellphone car mount. 1, Advanced surface treatment. 2, Storng adhesive on the back. 3, Scratch-Resistant Protective Films Included, simply stick magnet sticker for phone mount behind films to your case/battery cover, on a rugged case, or directly to your device. Then device will automatically suck as it closes to the car mount..
  • 【3M sticky adhesive replacements compatible with Phone Holder, Metal Plates, Magnetic Car Mount Holder】IMPORTANT NOTE: Here are some problem customer may encountered frequently. 1. Hard to peel off the red backing film, in this situation, please repeat this act: peel-if come up-press red film back-peel again. 2. Adhesive can’t stick well on phone case, please don’t not stick adhesion on rugged, texture surface silicone phone case, it may not stick well. 3. Last but the most important rule, wait.
  • 【Easy to use】You need to remove the used 3M tape of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3M adhesive sticky circles on the back of grip mount or phone case and pres....
Check Stock

2-Pack Replacement Mount Metal Plates D.Sking Car Phone Holder 3M Adhesive CD Metal Plates for Car Mount Car Kits Silver

  • ‖‖ METAL PLATE: Easy to use with all magnetic car mount holder,sock holder.
  • ‖‖ 3M ADHESIVE: Each metal plate has strong 3M adhesives tape, Easy to stick onto the back of phone or case without a hassle.
  • ‖‖ COMPATIBILITY: All of the metal plates are not magnetic, we strongly recommend to use these metal plates along with universal magnetic mounts....
  • ‖‖ NOTE: Metal plate may disable WIRELESS CHARGING, if you stick it on the back of the phone/case,Suggest to take the case off when use wireless....
  • ‖‖ Quantity: 2-Pack(2 Circle),30 Days money back warranty for quality problems..
Check Stock

Phone Case for AT&T Huawei Ascend XT2 Prepaid Smartphone Cricket Huawei Elate Frosted Gel Flex Cover Case with Air Vent Magnetic Car Mount Phone Holder Frosted-Clear

  • Designed for: AT&T Huawei Ascend XT2 Prepaid Smartphone, Cricket Huawei Elate, H1711.
  • Easy fit, apply or removed. Material: TPU / Gel. Tailored holes allow easy access to all buttons without having to remove the skin. Protected your....
  • Air Vent Magnetic Car Mount Phone Holder - Simple design slips right into the air vent and magnetically attaches to your cell phone. The magnetic car....
  • NO HASSLE MOUNT: Magnetic design means, no cradles, brackets, clamps or gel and sticky residue. 3M Adhesive Metal Plate: Stick adhesive metal plate....
  • Package includes: One Air Vent Magnetic Car Mount Phone Holder, One Metal Plate.
Check Stock

Magnetic Phone Holder for Car, [ Powerful Magnets & Military-Grade Suction] Car Phone Holder Mount Dashboard Windshield Cell Phone Holder Phone Stand for Car Fit for iPhone Android Automobile Cradle

  • 【Note】Any device even iphone 14/13/12 must use the included metal plate..
  • 【Note】Not recommended to use the suction cup auxiliary fixator for windshield mounting..
  • 【Upgraded Super Magnet】Featuring four upgraded N52 magnets, this magnetic car phone holder offers stronger magnetic force than other magnetic phone holders.After gently putting the included metal plate on your phone or case, the dolyofg magnetic phone holder will hold your phone firmly, even on bumpy roads..
  • 【Broad Vision】 Magnetic phone holder can be securely mounted on the dashboard or windshield, never blocking your frontal view or vents. Its compact size and extremely low mounting height allow the driver to see the road at its widest, giving them the best possible view of the road. The cell phone holder is suitable for most cars, SUVs, trucks and cabs. great for Uber and Lyft drivers..
  • 【All-round protection】Designed with high quality ABS and environmentally friendly silicone, the car phone mount is durable and protects your phone. It has a thick layer of silicone at the magnet to protect your smartphone from wear and tear..
  • 【Upgraded Stabilized Suction Cup】 Phone mount for car uses 3 layers of nano gel suction cups that are three times stronger than ordinary suction!....
Check Stock

eSamcore Magnetic Phone Mount Metal Plate Wireless Charging Compatible Phone Magnet Sticker for Magnetic Phone Holder for Car [Round Medium Size] [2.1 inch Diameter] [2-Pack]

  • Wireless Charging Compatible Metal Plate: eSamcore magnetic car mount metal plate will not block the wireless charging capability of your cell phone.....
  • New Round Medium Size: The diameter of the round phone magnet plate is 2.1 Inch. This new size phone plate provides strong suction for the magnetic....
  • All Magnetic Phone Holder Compatible: This phone metal plate sticker is designed to work with all kinds of magnetic phone car mount, especially round....
  • Strong Adhesive: Powerful 3.M. VHB tape provides high Stickiness to attach with your phone or case. For better magnetic effect, do not stick the....
  • Notice: eSamcore phone magnet sticker can only be placed on a naked phone or a thin case (thinner than 2mm) in order to preserve the wireless charging....
Check Stock

Scosche MPRNDRK-SP MagicMount Phone Replacement Plate Kit - for Magnetic Car Phone Mount Holder with Extra Strength Hold Universal with All Devices Black - Round

  • Replacement Kit - These metal magnetic stickers work with any magnet car phone holder mount. Simply stick the magnet plate pad to the backend of an....
  • Strong Hold - The hold acts like sticky pads and are made with a heat resistant automotive grade formula. Designed to provide a strong backing in all....
  • Universal Compatibility - Our metal phone plate works with any magnetic car cell phone holder. These round plates act like PopSocket sticky pads and....
  • Protective Film - Double sided sticky pads are designed to easily mount and remove the magnetic plate without damaging your phone. Ensure you apply....
  • Accessories Included - Large MagicPlates, small MagicPlates, protective film and user manual..
Check Stock

Magnetic car Phone Holder BRNBW Car Phone Holder Mount Upgrade Clip Universal Cell Phone Holder for Car Air Vent Compatible iPhone 12/sumsung

  • 1.【Magnetic phone mount】 offers you two metal plates. Plate has an adhesive tape that you use to attach it to the phone. Bigger metal plate is....
  • 2.【Never fall off】This car phone holder is designed in a "hook shape" to form "three grasping points", which can clamp the socket blade tightly to....
  • 3.【Never block a vent】BRNBW magnetic phone holder for car has an arm that extends away from the vent which avoids overheating issues, as well as....
  • 4.【Work with Standard Vent 】 BRNBW phone holder for car is a basic mount with a locking clip that attaches to most air conditioning vents which....
  • 5.【Support 4.7" - 6.9" phones】 Car cell phone holder for iphone adaptable to Most Phone Sizes: Car phone holder mount vent expands up to....
Check Stock

Metal Plate for Phone Magnet, 10 Pack Volport MagicPlate with 3M Adhesive Replacement for Magnetic Phone Car Mount Holder & Cradle & Stand (Vent/CD/Windshield/Dashboard) - Rectangle and Round

  • This car magnet metal plate is designed to use with magnetic mobile phone car mount, magnetic air vent mount and other magnetic cellphone car mount. Good quality and value replacement metal plates for magnetic cell phone holder.
  • All 10 pack magnet mount plates have strong 3m adhesive on the back – 4 pack rectangular and 6 pack round. Give you enough options to use with multiple devices. The rectangular thin metal plate is better for larger phones, i phone xs, xs max, xr, 8 plus, mini tablets and gps devices.
  • Super thin metal plate and add no perceptible bulk for your phone or phone case. This phone mount plate for cell phone magnets allows you to place your phone horizontally or vertically. No more phone falling off even going over bumpy roads.
  • 8 pack for multiple devices and 2 pack extra small metal plates. You can share the extra metal plates with your family members or friends. These car mount magnet plates are also great additions for various phone cases.
  • All of the metal plates are not magnetic plates, we recommend this metal mounting plate along with universal magnetic mounts for dashboard, vents, cd slot, windshield or windows. for WIRELESS CHARGING, please place metal plate on the phone AWAY FROM wireless charging sensor. Or place ....
Check Stock