Reviews Magnetic Coupling For Oil And Gas

HFS (R Vacuum Pump Double Stage 12CFM ; 340 L/min ; 110V/60HZ ; Inlet Port: 1/4\ and 3/8\ SAE; Ultimate Vacuum: 2Pa or 15 microns, Power 1HP

  • [Parameters]: 110V, 60Hz, 12CFM 340L/min. Ultimate Vacuum: 2X10-1Pa 15 microns, 2 Stage, Power: 1HP, Inlet Port 1/4’’-3/8’’ SAE, oil capacity: 630ml, Dimension:153’X57’’X100’’(390mmx145mmx252mm/).
  • [Working Temp.]: The product operates in ambient temperature:5℃~40℃ It is equipped with thermal protection function. If the room temperature is too or the voltage is too high, the product may stop working..
  • [Oil Anti Flow-Back Design & Environmental Design] - The gas inlet is specially designed to prevent oil form flowing back, preventing the container and hoses from being polluted.
  • The tank has separating devices at the exhaust port to prevent oil spraying and to reduce pollution.
  • [Easy start design With Alloy Aluminum Casing] - Motor is made from allow casing which has good heat dissipation to keep the pump running efficiently and for a longer life.
  • It starts easily even in cold temperatures.
  • Anti-Vibration - An electrometric coupling insert between the motor and module results in an extremely quiet and low vibration running condition..
  • [Application]: They are extremely useful in refrigeration repair, medical appliances, printing machinery, vacuum packing, gas-analysis, and hot-forming plastics..
Check Stock

3 Embers ACC6000AF Natural Gas Conversion Kit Violet

  • Converts your 3 Embers dual fuel grill to natural gas.
  • Tools needed for installation not included: two adjustable wrenches, phillips screwdriver, pipe-thread sealant.
  • Converts these 3 Embers Grill Models - GAS7480AS & GAS7480BS.
  • Check grill owners Manual for conversion instructions.
Check Stock

JoyTube Brass Hose Barb Fitting Metals Splicer Mender 1/4 Barb Hose Union Fuel Gas Water Air Pack of 12

  • Connections: 1/4” to 1/4”. Our hose barb fitting is long enough,which make sure it can insert hose but not easy to be apart. Our barb union will provide good seal when you use it to connect hose..
  • Application of our barb splicer is very wide, such as Temperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines.(Air/Water/Fuel/Boat/Gas) ..
  • Connects to a hose on both ends. Union coupling for connecting two hoses with the same diameter in a straight run..
  • Brass barb union for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • The barbed stems create better tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not include)..
Check Stock

Snap-On Y253 Replacement Toolbox Key: 2 Keys

  • New Larger Sized Labels with Stronger Magnetic Hold.
  • Larger Bright White Fonts with Added Tool Images.
  • New Color Coding and 45 Larger Labels Doubles Tool Selection.
  • Chrome Foil over Heavy Magnetic Material makes for Oil and Gas Resistant's.
  • The Ultimate Toolbox Labeling Set Bigger - Better - Stronger.
Check Stock

Shankly Mechanical Oil Pressure Gauge Kit Compression Tester - Professional Engine Compression Testing Kit or Gauge Oil Pressure

  • ✅ OIL PRESSURE GAUGE KIT: Shankly's oil pressure gauge is used to monitor the oil pressure in your vehicle. This pump tester prevents you from engine failure, broken hose, or leaking gasket due to lack of oil. Great to have in your toolbox.
  • ✅ DURABLE & GREAT QUALITY: Shankly's oil pressure gauge line is well protected by a rubber bumper and a decent length of hose. It comes with spare orings adaptor and with quick connect couplers, making this a reliable tool and long lasting.
  • ✅ UNIVERSAL: This oil pressure tester includes a 90-degree coupling adapter for limited access applications. This is also fitted with quick coupling adaptors and 1200mm of hose that will serve a mechanic effectively for a very long time.
  • ✅ CONVENIENT HANDY CASE: Shankly's oil pressure tool comes in a convenient case, making transportation, storage, and organizing a snap. This oil pressure gauge line kit works perfectly for your setup.
  • ✅ SATISFACTION GUARANTEED: We stand by the word "quality" we assure you that your purchase of this oil pressure test kit will arrive in your place in good condition, If any issues occur, feel free to contact us.
Check Stock

ALLMOST Carburetor Carb Assy Compatible with Predator 3500 Watts Inverter Generator 63584

  • SUPERIOR QUALITY: High-quality CNC Billet Aluminum with silver anodized coated resisting corrosion and rust. And the upgrade generator extended gas....
  • PERFECT DESIGN: The upgrade crisp knurling design can be effective anti-skid for more convenient and safe usage. Plus, the upgrade gas cap with brass....
  • INTENDED TO USE: Screw this funnel into your generator for easy, safe and mess free oil change every time. Oil magnetic dipstick attracts and holds....
  • GREAT COMPATIBILITY: Fit for HONDA Generator EU1000 EU2000 EU3000 EU1000i EU2000i EU3000i Handi. Please kindly note that NOT FIT FOR EU2200i..
  • PREMINUM SUPPORT: Our focus on products and customer services is 2nd to none. We provide friendly 3 years’ warranty support, easy-to-reach Customer....
Check Stock

WeldingCity Heavy Duty Acetylene Heating Nozzle (Rosebud) MFA Series Size 8 (8-MFA) for Victor 300 Series Torch Handles

  • Premium quality brand-new one-piece type acetylene gas heating nozzle MFA series for Victor 300 series torches. Pack of one MFA nozzle..
  • Spiral mixer with double O-ring sealed to blend oxy-acetylene gas. Brass coupling nut with built-in snap ring. Total nozzle length: 12" (size 4 - size 8) and 17.5" (size 10). 65° elbow tip angle..
  • General purpose heavy duty multi-flame heating head for heat treating, straightening and priming with oxy-acetylene gas. Available nominal tip orifices: 4, 6, 8 and 10..
  • Work with Victor heavy duty 300 series torch handles and other aftermarkets gas handle versions..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Showingo New Pipeless Magnetic Jet Head Motor for LURACO Pedicure spa Chair Part Magnetic Head BF-004 Pedicure spa Tubs Includes Propeller and Cap

  • Pedicure spa chair part magnetic head uses magnetic coupling technology..
  • Magnetic Head Includes set 1- base , 1- magnetic impeller and 1- cover..
  • Pipeless Magnetic Motor Jet Head can be fitted with all Luraco magnetic Motor..
  • There is no shaft seal, will never leak, is worry free.
  • The Magnet-jet be easily sanitized, clean, and service..
Check Stock

Magnetic Jet Motor BF-004 for Luraco Magnetic Jet Pedicure Spa Tubs Wet End Use with Pedicure Liners (Includes Propeller and Cap)

  • BF-004 Pedicure spa chair part magnetic head uses magnetic coupling technology.Whirlpool Spa Chair.MOTOR DIMENSION: 3 3/8"" Diameter Back Head X 3 1/8"" ..
  • Pipeless Magnetic Motor Jet Head can be fitted with all Luraco magnetic Motor..
  • Magnetic Head Includes set 1- base , 1- magnetic impeller and 1- cover..
  • There is no shaft seal, will never leak, is worry free..
  • If for whatever reason, you decide you are not satisfied, you can request a replacement or a full refund, no questions!.
Check Stock

ABN 6in Automotive Magnetic Tray Small Parts Dish with Divider, Metal Magnet Bowl Mechanic Tool, Screw, Pin, Bolt Holder

  • [Keep Parts Within Reach]: Use the ABN 6-Inch Round Magnetic Parts Tray Small Magnet Tool Tray with Dividers for automotive repair work or other projects where keeping track of small loose parts is vital.
  • [No More Spills]: Magnetic base keeps fasteners and other components inside the metal magnetic bowl.
  • Tool magnet tray can be mounted horizontally, vertically, or even upside down on hoods, fenders, and other metal surfaces.
  • [Stay Organized]: Round magnetic screw tray has 6-inch (15.2 cm) diameter and 1-inch (2.5 cm) depth.
  • Includes (4) 2.25 x 2.25-inch (5.7 x 5.7 cm) equally sized compartments to separate small metal parts.
  • [Built to Last]: Constructed of polished stainless steel that is rust-resistant and prevents gas and oil buildup.
  • Magnetic rubber base prevents damage to finished surfaces.
  • [Package Contents]: Magnetic tool holder tray package includes (1) 6-inch (15.2 cm) circular magnetic parts bowl to suit your needs.
Check Stock