Reviews Magnetic Coil

Wormhole Tattoo Machine 16 Wraps Coil Tattoo Gun Traditional Chinese Style Cloisonne Tattoo Machine Gun Both for Liner and Shader

  • Material: The tattoo machine consists of high speed steel frame and military anaerobic copper coil..
  • Technology: The tattoo machine adopts to the traditional Chinese Cloisonne Craft. Half radian structure and exquisite look make it unique..
  • Efficient: The coil core of the tattoo machine is superconducting magnetic material with fast magnetic conduction and 16 wraps copper coil ensure higher efficiency..
  • Stable: The armature is weighted to increase the strength of the machine from needle insertion to skin. There is no need to install a magnetic conductor block because the machine is stable enough..
  • Limited Supply: Launched by Wormhole Tattoo and well-known tattoo artists, the Black Five is available in limited quantities for a total of 40 units while stock lasts..
Check Stock

Power Acoustik 12" Woofer Dual 4 Ohm 2500W Max

  • Overcompensating Motor Structure for Increased Magnetic Strength, 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics, Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up, Die-Cast Aluminum Heat Sink Dust Cap Absorbs Voice Coil Heat, Aluminum Dust Cap Fins Dissipate Heat & Strengthen Cone.
  • Non-Magnetic Non-Resonate Die-Cast Aluminum Frame, 2.5” 4-Layer Voice Coil w/ Large Gauge Wire Increases Power, High-Temperature Tolerance Adhesives Resist Thermal Failure, Nickel Plated 8ga Spring-Loaded Compression Wire Terminals, Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection.
  • High-Density Polyether Foam Surround w/ UV & Chemical Protection, Dual Poly-Cotton Suspension Dampen Violent Accelerations, Stitched Voice Coil Leads Prevent Potential Damage, 1-pc Gasket/Trim Ring w/ Concealed Mounting Holes Included.
  • Efficiency (1w/1m): 86.50, Voice Coil Configuration: 2.50″ Dual 4Ω, Motor Volume: 254oz Re: 7.230Ω Fs: 28.60Hz Qes: 0.416 Qms: 4.722 Qts: 0.383 Diameter: 12”.
  • Vas: 1.69ft3 Bl: 24.55tm Mms: 200.815g Cms: 152.013 Sen: 86.56db MAX Power: 2,500w RM....
Check Stock

ICZW Induction Heater 1500W Magnetic Automotive Flameless Heating Handheld Bolt Removal Rusty Screw Removing Tool 110V

  • 【Induction heater coil kits】This 1.5KW induction heater comes with Φ20mm*1, Φ26mm*1, flat coil*1, DIY coil*1, is suitable for heating various rusty bearings and nuts. Compared with 1000W induction heater, the coil is thicker and more durable.
  • 【Safety】Flameless heating,This induction bolt heater has excellent performance, adopting high frequency magnetic field to heat metal only by induction heating.
  • 【High Efficiency】Separate design that makes this magnetic induction heater can heat continuously for 6 minutes. Heat the object to 800℃ in 5-40 seconds by 1.5KW high power.
  • 【Easy to use】One-touch switch with a handle that conforms to manual mechanics for easy operation and movement.
  • 【Application】 Adopting electromagnetic induction theory, it can fast heat small metal parts of automobiles or machines. Mainly used for heating rusty/frozen/corrosive bolts, nuts, fasteners, suspension nuts, gears, pulleys, bearings, etc., but also helps remove car stickers.
Check Stock

MB Quart - Two Pairs of Formula 5x7 / 6x8 Inch 2-Way Coaxial Car Speakers - FKB168

  • Speaker Surround: Butyl rubber surrounds provide durability and deeper mid-bass impact. Voice Coil: Pure Copper voice coil creates a strong magnetic....
  • Voice Coil Former: Kapton voice coil former is lightweight and efficiently dissipates heat..
  • Spider: Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process..
  • Cone Material: Lightweight thermal-formed polypropylene cones enable faster midrange response..
  • Cooling System: Over-coil cooling system allows air exchange over the voice coil through the spider..
Check Stock

Soundstream 2000W Peak (1000W RMS) 12' Tarantula Dual 4-Ohm Car Subwoofer

  • Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke and Top Plate Improve Low Frequency Dynamics | Vented T-Yoke and Frame Reduces Voice Coil Heat Build Up.
  • Non-magnetic Non-resonate Die-Cast Aluminum Frame | 3" 4-Layer Voice Coil with Direct Connect Wire Increases Power Handling | High Temperature Tolerance Adhesives Resist Thermal Failure.
  • Non-Transfer Spruce Pulp Cone with UV and Chemical Protection | Stitched and Glued Surround/Cone Joints for Strongest Bonding | Extended Excursion Polyether Foam Surround with UV and Chemical Protection | Dual Poly-Cotton Suspension Dampen Accelerations.
  • 1-pc Gasket / Trim Ring with Concealed Mounting Holes Included | RMS Power Handling: 1,000W | Max Power Handling: 2,000W | Voice Coil Impedance: 4-Ohm + -Ohm.
  • Mounting Depth: 7.25" | Optimum Sealed Box Volume: 1.50ft3 | Optimum Ported Box Volume: 2.50ft3.
Check Stock

MB Quart - Pair of Formula FSB216 6.5 Component Speakers and A Pair of Formula 6x9 Speakers FKB169

  • Speaker Surround: Butyl rubber surrounds provide durability and deeper mid-bass impact. Voice Coil: Pure Copper voice coil creates a strong magnetic....
  • Voice Coil Former: Kapton voice coil former is lightweight and efficiently dissipates heat..
  • Spider: Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process..
  • Cone Material: Lightweight thermal-formed polypropylene cones enable faster midrange response..
  • Cooling System: Over-coil cooling system allows air exchange over the voice coil through the spider..
Check Stock

Soundstream X5.15 Team 15' Tarantula 7500W Dual 1 Ohm Subwoofer Bass Speaker

  • Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke and Top Plate Improve Low Frequency Dynamics | Vented T-Yoke and Frame Reduces Voice Coil Heat Build Up.
  • Non-magnetic Non-resonate Die-Cast Aluminum Frame | 3" 4-Layer Voice Coil with Direct Connect Wire Increases Power Handling | High Temperature Tolerance Adhesives Resist Thermal Failure.
  • Non-Transfer Spruce Pulp Cone with UV and Chemical Protection | Stitched and Glued Surround/Cone Joints for Strongest Bonding | Extended Excursion Polyether Foam Surround with UV and Chemical Protection | Dual Poly-Cotton Suspension Dampen Violent Accelerations.
  • 1-pc Gasket / Trim Ring with Concealed Mounting Holes Included | RMS Power Handling: 1,000W | Max Power Handling: 2,000W | Voice Coil Impedance: 4-Ohm + -Ohm.
  • Mounting Depth: 9.25" | Optimum Sealed Box Volume: 2.00ft3 | Optimum Ported Box Volume: 4.00ft3.
Check Stock

Power Acoustik BAMF-124 12 Inch 3500 Watt Max 1750 Watt RMS Car Audio Subwoofer Speaker with 3 Inch Dual Voice Coil and Vented T Yoke (2 Pack)

  • 2 PACK OF POWERFUL SUBWOOFERS: 2 pack of 12-inch, 3500-watt subwoofer with an overcompensating motor structure for increased magnetic strength.
  • IMPRESSIVE PERFORMANCE: 12-millimeter T-yoke and top plate improve low-frequency dynamics.
  • 3-inch, 4-layer voice coil with direct connect wire increases power handling.
  • PROTECTION FEATURES: Vented T-yoke and frame reduces voice coil heat build-up.
  • High-temperature tolerance adhesives resist thermal failure.
  • Stitched voice coil leads prevent potential damage.
  • Non-transfer Spruce pulp cone with UV and chemical protection.
  • DURABLE DESIGN: Non-magnetic, non-resonate die-cast aluminum frame is lightweight yet durable.
  • Stitched and glued surround and cone joints for strongest bonding.
  • INCLUDES: 2 1-piece gasket/trim Ring with concealed mounting holes included.
Check Stock

(2) Pairs MB QUART FSB216 6.5' 280 Watt Car Audio Component Speakers

  • ...55 Hz - 20 kHz. Sensitivity: 88 dB. Crossover Point: 2 kHz. Crossover Slope: 12 dB. Tweeter Dome Material: Aluminum dome tweeters deliver great sound with increased reliability.
  • Speaker Surround: Butyl rubber surrounds provide durability and deeper mid-bass impact. Voice Coil: Pure Copper voice coil creates a strong magnetic field with a very thin extrusion. Voice Coil Former: Kapton voice coil former is lightweight and efficiently dissipates heat. Spider: Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process. Cone Material: Lightweight thermal-formed polypropylene cones enable faster midrange response.
  • Surround/Cone Coupling: The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather. Gasket: A textured ABS gasket assures a rigid linear seal to the mounting surface. Tinsel Leads: Highly conductive while remaining flexible during high power applications. Cooling System: Over-coil cooling system allows air exchange over the voice coil through the spider.
  • External Component Crossover: External Passive Butterworth crossover for a smooth transition of frequencies from midrange/midbass to the tweeter element designed....
Check Stock

Soundstream AF.694 Arachnid Full Range 6x9' 4-Way 500W Speakers,Black and Silver

  • Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke and Top Plate Improve Low Frequency Dynamics | Vented T-Yoke and Frame Reduces Voice Coil Heat Build Up.
  • Non-magnetic Non-resonate Die-Cast Aluminum Frame | 3" 4-Layer Voice Coil with Direct Connect Wire Increases Power Handling | High Temperature Tolerance Adhesives Resist Thermal Failure.
  • Non-Transfer Spruce Pulp Cone with UV and Chemical Protection | Stitched and Glued Surround/Cone Joints for Strongest Bonding | Extended Excursion Polyether Foam Surround with UV and Chemical Protection | Dual Poly-Cotton Suspension Dampen Accelerations.
  • 1-pc Gasket / Trim Ring with Concealed Mounting Holes Included | RMS Power Handling: 1,000W | Max Power Handling: 2,000W | Voice Coil Impedance: 4-Ohm + -Ohm.
  • Mounting Depth: 7.25" | Optimum Sealed Box Volume: 1.50ft3 | Optimum Ported Box Volume: 2.50ft3.
Check Stock