Reviews Magnetic Circuitry
Retro Manufacturing HPA1 Black Amplified Hide-Away AM/FM Antenna
- Magnetic field circuitry for enhanced radio reception.
- 105-inch antenna cable and power wire included.
- Never again worry about a broken or stolen antenna.
Check StockRega Aria V2 Flagship MM/MC FET Phono Preamplifier
- ...e are two entirely separate, high performance phono stages. One fully adjustable, dedicated moving coil and one moving magnet. Each stage is designed and engineered to maximise the potential of your vinyl system whilst remaining easy to use and set up..
- The Aria is an "all analogue amplifier" with no digital control circuitry. The fully aluminium case screens the internal circuit from any stray RFI signals. Our designers have avoided including any superfluous gadgets as they obstruct the signal path and degrade the sound quality. The Aria incorporates many innovative design ideas including a self-adjusting servo control to keep the MC input circuit at its optimum, compensating for any variations in ambient or operating temperature..
- Both stages have their own separate input sockets and input pre-amplifier circuitry. This enabled us to design bespoke input circuitry for each cartridge type without compromise. Signal switching is performed at high level and low impedance (via relays) ensuring there is no degradation of the signal..
- The MC input uses parallel connected, low noise FET's (Field Effect Transistor's) configured as a compound pair. The use of FET transistors ensures there is no bias current flowing in the cartridge coil so as not to upset the d....
Check StockFein JHM USA 101 Endurance Magnetic Drill with 2' Maximum Drilling Depth - 3/4' Straight Shank, 1,050 W, 480 RPM - 72725261124
- Outstanding Performance - It is solid, massive construction in die-cast aluminum for work under difficult conditions and uniform-torque motor for demanding core drilling..
- Convenient - It has accessory handle for easy carrying of tool.ad directly on the battery and hand feed wheel can be mounted on either side..
- Features - It is for dimensionally-accurate drilling on the construction site. It has weight-optimized drill jig with integrated coolant tank (easily removed without tools) for vertical and overhead working..
- Safety Ergonomic - It has high concentricity, positive slug ejection due to special bore spindle guides and smart magnet circuitry will not allow motor to start without sufficient magnetic force..
- Specifications - Power Consumption: 1,050 W, Power Output: 530 W, Full Load Speed: 330 RPM, No Load Speed: 480 RPM, Stroke: 2-9/16", Magnetic Holding Force: 2023 Lbs., Cable with Plug: 12.5'.
Check StockBose Companion 5 Multimedia Speaker System – Graphite/Silver
- No special software, sound card upgrade, adaptors or complicated wiring required.
- Do not unplug any cables during this setup procedure.
- Speaker arrays come fully assembled on stands for superb performance and more usable desktop space and magnetically shielded satellite speakers prevent monitor interference or damage to magnetic media.
- Handy control pod houses volume control, single touch mute, headphone jack and connection for a second audio source such as an MP3 player.
- Proprietary integrated signal processing delivers lifelike performance at almost any volume level. Control pod: 2.5 H x 1.13 W Inches.
- Compression circuitry keeps your music clear and undistorted at high volume levels, Acoustimass module 21.8 cm H x 17.3 cm W x 42.5 cm D.
Check Stock16-PRX300.4 - Memphis 4-Channel 300W RMS 600W Max Power Reference Amplifier
- Compact aluminum chassis | Ultra bright LED accent lighting | Signal sense turn on.
- Variable Bass Boost (0-12dB) centered at 45Hz | High level speaker inputs | Fully variable high & low pass crossovers.
- Protection circuitry against overload, short circuit, thermak & reverse polarity with LED status lighting | Remote level bass boost | Removable magnetic “M” badge conceals top mount controls.
- RMS 4Ω (Watts): 50 x 4 | RMS 2Ω (Watts): 75 x 4 | RMS 1Ω (Watts): N/A | Bridged Mono Power 4Ω (Watts): 150 x 2.
- 0.02 | Frequency Response: 20Hz – 20kHz | Dimensions: 12.9″ x 7.4″ x 2″.
Check StockEaton VS106D1-C2-K Motion-Activated Vacancy Dimmer Wall Switch with Color Change Kit, Light Almond, White, Ivory
- Digital circuitry provides aesthetically pleasing soft-on/fade off that extends bulb life.
- Preset and light level change is easily shown with horizontal row of green leds.
- Works with popular load types: halogen, incandescent and magnetic low-voltage.
- Single green LED indicates load status, provides locator light in dark and blinks to indicate motion detection.
- LED serves as air-gap switch disconnecting power from load, forcing an off condition.
Check StockBehringer Compressor MDX2600
- Switchable IKA (Interactive Knee Adaptation) program-adaptive compression circuitry combines the advantages of hard-knee and soft-knee characteristics.
- Integrated De-esser with switchable male/female voice recognition removes excessive sibilance from your vocal tracks.
- IGC (Interactive Gain Control) peak limiting circuitry combines clipper and program limiter for reliable and inaudible protection against signal peaks.
- Switchable dynamic Enhancer for brilliant, lively audio even with heavy compression.
- IRC (Interactive Ratio Control) expander/gate circuitry for virtually inaudible noise suppression.
Check StockINNOMAX Thermal Guardian Quantum Solid State Waterbed Heater, Low Watt
- State-of-the-art Ultra sensitive electronic control that holds the temperature to 1/8 degree of set point ensures accurate temperature sensing.
- Certified to the standards of the Underwriter's Laboratories (UL) #1445 for Waterbed Heaters.
- Low Watt Solid State Waterbed Heater For Softside Fluid Support Sleep Systems with a Minimum 3” Fill water chamber or tubes.
- Thicker 32-gauge nickel/copper flexible circuitry design with 18-gauge power cord.
- EMF Reduced Circuitry Design Comprehensive 5 year limited warranty.
- Certified to the standards of the Underwriter's Laboratories (UL) No.1445 for Waterbed Heaters.
- Low Watt Solid State Waterbed Heater For Softside Fluid Support Sleep Systems with a Minimum 3" Fill water chamber or tubes.
Check StockBetter Sound from your Phonograph: How come? How-to!
- CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms.
- LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference.
- CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this can be connected to speakers, computers, laptops and more.
- SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs.
Check StockINNOMAX Thermal Guardian Touch Temp Solid State Waterbed Heater, Low Watt
- Convenient to Set and Easy to Read LED Digital Temperature Control with On/Off Button is accurate to 1/8 degree of set point.
- Certified to the standards of the Underwriter's Laboratories (UL) #1445 for Waterbed Heaters.
- Low Watt Solid State Waterbed Heater For Softside Fluid Support Sleep Systems with a Minimum 3” Fill water chamber or tubes.
- Thicker 32-gauge nickel/copper flexible circuitry design with 18-gauge power cord.
- EMF Reduced Circuitry Design Comprehensive 5 year limited warranty.
- Convenient to Set and Easy to Read LED Digital Temperature Control with On/off Button is accurate to 1/8 degree of set point.
- Certified to the standards of the Underwriter's Laboratories (UL) No.1445 for Waterbed Heaters.
- Low Watt Solid State Waterbed Heater For Softside Fluid Support Sleep Systems with a Minimum 3" Fill water chamber or tubes.
Check Stock