Reviews Magnet Wire 10 Gauge

(4) Rockville RMSTS80S 8\ 2000 Watt Waterproof Marine Boat Speakers 2-Way Silver

  • ...e. 1" Polymide Dome Neodymium Midrange Tweeter.Built-In Two-Way Crossover Network..
  • Fully Marinized Against Salt & Fresh Water Conditions. Completely Water / Rust Resistant. Terminals Are Sealed with Rubber Gaskets. Specially Tuned for PA Voice Over. Polypropylene Mica Injected Cone with Santoprene Surround. High BL Magnet Motor Structure. Y30 High Density Magnets. Oversized 1.25” Kapton Voice Coil..
  • Features of RMWK4: Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit. 20 ' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable. 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the battery compartment. 18' 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable..
  • 25' 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable. 25' Blue Remote Wire. (1) Silver Mini-ANL Fuse Holder - Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring. (1) 120A Mini-ANL Fuse. (1) 80A Mini-ANL Fuse. (2) Ring Terminals. (2) Spade Terminals. (5) Speaker Cable Terminals. (1) Washer. (10) White Cable Ties.
Check Stock

Rockville DK512 PACKAGE Dual 12' 2800w K5 Car Subwoofer Enclosure+DB12 Amplifier

  • Loaded Sub Enclosure Features: Final Impedance: 2 Ohm, Peak Power Handling: 2800 Watts, CEA-2031 Compliant RMS Power Handling: 700 Watts, ¾” MDF enclosure, Bonded stapled and braced, Computer designed vents, Angled at 15 % for perfect bass alignment.
  • 2″ 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire, The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire, 50 Oz High Quality Magnet.
  • Amplifier Features: Rockville dB12 2000 Watt/500w RMS Mono Class D 2 Ohm Amplifier Car Audio Amp, CEA Compliant Power Ratings (Rated at less than 1 % distortion).
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.), – 2 Ohm: 1000 Watts x 1 Channel, – 4 Ohm: 600 Watts x 1 Channel.
  • Amp kit features: 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable, 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables, 17’ – 18 Gauge Blue Remote Cable, 17’ – 16 Gauge Clear Speaker Wire, 3’ – 4 Gauge Clear SuperFlex Ground Wire.
Check Stock

4 Alpine SPE-6090 6x9 600 Watt Car Audio Speakers+4 Channel Amplifier+Amp Kit

  • ...peakers Totaling 600 Watts. (1) Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. (1)RockvilIe RWK42 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA's. 6" x 9" Type-E Coaxial 2-way Car Speakers. Polypropylene cone pearl mica injection. 3/4" Silk soft dome tweeter. Tweeter Magnet: Neodymium. Woofer Magnet: Ferrite. 4 ohms impedance. Square voice coil. Injection molded frame.
  • Peak Power Handling Per Pair: 600 watts. Peak Power Handling Each: 300 watts. RMS Power Handling Per Pair: 150 watts. RMS Power Handling Each: 75 watts. Frequency Response: 65-18,000 Hz. Sensitivity: 91 dB. Top-Mount Depth: 3". Mounting Diameter: 5-15/16" x 8-3/4". Features: Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Terminal Layout: Two-Sided. Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals.
  • Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Amplifier Type: Class-A/B. Channel Design: 4/3/2 Channel. Thermal Control: Thermal Management Control. Power Supply: DC-DC PWM Power Supply. Power Supply Design: MOSFET Power. Current Protection: Over-Current, Over-Voltage and Thermal Protection. Crossover: Variable Low-Pass / High-Pass. Green/red status LED. ....
Check Stock

BNTECHGO 28 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0122\ Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 28AWG magnet wire is 4 ounces(527 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 28 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0122"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 20 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0315\ Diameter 1 Spool Coil Natural Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 20AWG magnet wire is 4 ounces(80 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 20 gauge enameled magnet wire: Wrapped in spool and color is natural.Outside diameter 0.0315"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 20 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0315' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 20AWG magnet wire is 4 ounces(80 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 20 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0315"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 22 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0256' Diameter 1 Spool Coil Natural Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 22AWG magnet wire is 4 ounces(122 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 22 gauge enameled magnet wire: Wrapped in spool and color is natural.Outside diameter 0.0256"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 22 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0256' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 22AWG magnet wire is 4 ounces(122 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 22 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0256"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 26 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0157' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 26AWG magnet wire is 4 ounces(323 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 26 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0157"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BINNEKER 24 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 1.0 lb - 0.0221\ Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 24AWG magnet wire is 1.0 pounds(823 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 24 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0221"for perfect thickness..
  • BINNEKER magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock