Reviews Magnafuel Efi Regulator
NEW HOLLEY SNIPER EFI STEALTH KIT 4150 4 BBL FUEL INJECTION CONVERSION MASTER KIT,GOLD,870 CFM,COMPATIBLE WITH 4150 FLANGE STYLE MANIFOLDS
- ...d ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! Did we mention that the Stealth 4150 also includes transmission kick down provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications..
- Master Kits include complete fuel system with an external fuel pressure regulator preset to 58.5 PSI, 20 feet of 3/8″ Vapor Guard Fuel Hose, Fuel Pump, Filters, necessary hardware & bulkhead fitting to return fuel into the tank!.
Check StockGSL392 Inline Fuel Pump & 58 PSI Fuel Filter Regulator 58 PSI LS Swap Fuel Pump EFI Conversion Fuel Filter Pressure Regulator 255LPH High Pressure External Pump 6AN Fittings 400-939 GSL392-400-939
- REPLACEMENT 58 PSI FUEL FILTER REGULATOR - Fuel pressure regulator filter kit comes with 6AN adpater fittings for LS Swap , which can deliver 58 PSI (4 BAR) to your fuel rail and return unused gas to the tank. Besides, it can ensure the clean fuel is delivered properly to your engine with a 10 micron fuel filter, which play an important role in protecting the daily operation of the engine, and extending the engine service lifespan..
- GSL392 HIGH PRESSURE FUEL PUMP - LS Inline fuel pump is designed to start higher-pressure fuel racing or performance-purpose vehicles stably and safely, which can help to meet the requirements of most modern turbocharging applications. At 80 PSI, Yinlowa 255 lph high pressure fuel pump can flow around 132 liters (35 gallons) per hour.
- At that same 80 PSI the equivalent HP (high pressure) fuel pump can flow over 210 liters (50 gallons) per hour.
- FITMENTS - GSL392-400-939 Inline Fuel Pump fits EFI applications including turbo and supercharged, variety of pressures and flows available, including high pressure performance.
- 58 PSI Fuel Pressure Regulator AN-6 Fittings for LS Swap EFI Conversion i....
Check StockEVIL ENERGY EFI 255LPH Electric Intank Fuel Pump High Flow 43PSI Kit
- EVIL ENERGY intank fuel pump fit for 12V DC EFI system only..
- Test flow:255LPH (43PSI), 190LPH (80PSI), Operating Pressure: 15-90 PSI, final fuel pressure set by regulator..
- Applicable fuel: gasoline, E85 and ethanol gasoline with less ethanol content than E85. (high impurity gasoline will directly affect the pump life).
- The diameter of 255LpH high-flow INTANK electric fuel pump may be different from the original model, but it will not affect the use.Hoses, filters or other equipment may need to be replaced.Professional installation is highly recommended..
- EVIL ENERGY provide EFI fuel pump product 6-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check StockFuel Filter/Regulator 4 BAR with -6AN Inlet and Outlets Stainless Steel for LS swaps and EFI conversion
- Fuel filter & pressure regulator for LS swap with no adapter fittings required..
- 58 PSI (4 BAR) regulated pressure output, perfect for LS swaps and many EFI conversions..
- Aftermarket 5 micron fuel filter and pressure regulator manufactured with AN -6 inlet and outlets..
- Connect directly to your -6AN hose or hard line..
- For custom/aftermarket application only. AN-6 ends will not fit hoses in original GM application..
Check StockFuel Filter/Regulator 58 PSI Kit with AN-6 Fittings for LS swaps and EFI conversion
- Simple fuel supply for LS swap with AN-6 adapter fittings included..
- Your electric fuel pump works continuously & this bypass regulator passes excess fuel back into the tank so the pump can run freely. This filter-regulator is commonly installed near the tank so that only a short return line is required..
- This is a popular fuel supply solution for fuel injection (EFI / FI) retrofits and for swaps to modern engines like the GM Gen III and Gen IV "LS" V8s..
Check StockLSx Fuel Filter / Regulator, 58 PSI, Includes AN 6 Fittings for LS Swap, EFI Conversion
- This AN6 fuel filter and regulator adds reliability and reduces cost with -6 AN inlet, outlet, and return fittings built into the assembly.
- Designed specifically for LS swaps or EFI conversions that require a reliable and professional fuel system solution.
- 58 PSI fuel pressure regulator is integrated into the filter and works well with modern fuel injected engines such as LS, Hemi, and more.
- Eliminates adapter fittings and includes a mounting bracket with rubber insulator to make installation a breeze.
- Five micron fuel filter is built into the assembly to protect your injectors and ensure a long service life.
Check StockReplaces 74505-02 7450502 H0502 Voltage Regulator Rectifier Compatible with 2002-2003 Harley Davidson ROAD KING ROAD GLIDE ELECTRA GLIDE
- Please must check the product title or description ensure this part fits for your motorcycle before bidding , and please check whether the voltage is normal before installation , fixes overheat condition, designed to run cooler and last longer..
- STAGE 2 - Replaces Part Numbers: #4013247 4013904 4014029 Meets or exceeds OE Specs.
- High-efficiency heat-resistant wire reassembly harness with heavy OEM quality connectors for RZR front cover installation: distance adjuster to remove dust, dirt and debris from fins, thereby significantly reducing cooling at stock locations..
- OVERHEAT PROTECTION - This voltage regulator rectifier was designed with improved heat sink for best cooling.
- For: Polaris ACE 325 EFI L/C -- 2016 Polaris ACE 500 -- 2017-2018 Polaris ACE 570 EFI -- 2016-2018 Polaris ACE 900 -- 2017-2018 Polaris General 1000 -- 2016-2018 Polaris General 4 1000 -- 2017-2018 Polaris Ranger 1000 Diesel -- 2014-2017.
Check StockNew Winderosa Exhaust Valve Gasket Kit for Arctic Cat 600 Cross Country Racer 2014, 600 Sno Pro Factory Racer 2010 2011 2014, 600 Sno Pro Racer 2008, 600 Sno Pro/CC 2009 2010 2011 2012 2013
- Arctic Cat 600 Cross Country Racer 2014. Arctic Cat 600 Sno-Pro Factory Racer 2010 - 2014. Arctic Cat 600 Sno-Pro Racer 2008. Arctic Cat 600 Sno-Pro/CC 2009 - 2013. Arctic Cat Cross Fire 1000 EFI 2007. Arctic Cat Cross Fire 1000 EFI/Sno-Pro 2008 - 2009. Arctic Cat Cross Fire 600 All Models 2006 - 2011. Arctic Cat Cross fire 700 EFI 2006. Arctic Cat Cross fire 700 EFI Sno-Pro 2006. Arctic Cat Cross Fire 800 EFI 2007 - 2011. Arctic Cat Cross Fire 800 EFI Sno-Pro 2008 - 2009. Arctic Cat Cross Fire CFR 1000 EFI 2010 - 2011. Arctic Cat Cross Fire CFR 8 HO EFI 2010 - 2011. Arctic Cat F 1000 EFI 2007 - 2009. Arctic Cat F 1000 EFI Sno-Pro 2008 - 2009. Arctic Cat F6 Fire cat 600 EFI All Models 2005 - 2011. Arctic Cat F7 700 2004 - 2006. Arctic Cat F7 700 EFI Sno-Pro 2006. Arctic Cat F7 700 EFI w. Reverse 2005 - 2006. Arctic Cat F7 700 Fire Cat/EFI/Sno-Pro 2003 - 2006. Arctic Cat F7 700 Fire Cat/EFI/Son Pro 2005. Arctic Cat F8 EFI/LXR/Sno-Pro 2007 - 2011. Arctic Cat F800 EFI All Models 2012 - 2013. Arctic Cat Fire Cat 500 2003 - 2006. Arctic Cat Fire Cat 500/Sno-Pro 2003 - 2006. Arctic Cat Fire Cat 600 EFI Early Bird 2004. Arctic Cat Fire Cat 600 EFI w. Reverse 2005 - 2006. Arctic Cat Fire cat 600 2004. Arctic Cat Fire cat 600 EFI All Model 2004. Arctic Cat M ....
Check StockMotorcycle Seats, Driver Passenger Seat Cushion Fit For Harley Touring Electra Glide Classic 1998-2008 (red line A)
- ...-2008 // FLHTC Electra Glide Classic1998-2008 // FLHTCI Electra Glide Classic1998-2008 // FLHTCU Electra Glide Ultra Classic 2008// FLHTCU Electra Glide Ultra Classic 1998// FLHTCUI Electra Glide Ultra Classic 1998-2008// FLHTI Electra Glide Standard 1998-2008.
- Fit For 2007-2008 Harley-Davidson Electra Glide Classic EFI FLHTCI// Classic FLHTC// EFI FLHTI// FLHT// Ultra Classic EFI FLHTCUI// Ultra Classic FLHTCU// Ultra Classic Firefighter SE EFI FLHTCUI// Ultra Classic Peace Officer SE EFI FLHTCUI// Ultra Classic Shrine SE FLHTCU/// 2006 Harley-Davidson Electra Glide Classic EFI FLHTCI// Classic FLHTC// EFI FLHTI// FLHT// Ultra Classic EFI FLHTCUI// Ultra Classic Firefighter SE EFI FLHTCUI// Ultra Classic Peace Officer SE EFI FLHTCUI.
- Fit For 2005 Harley-Davidson Electra Glide Classic EFI FLHTCI// Classic FLHTC// Classic Firefighter SE FLHTC// Classic Shrine SE FLHTC// EFI FLHTI// FLHT// Ultra Classic EFI FLHTCUI// Ultra Classic FLHTCU// Ultra Classic Firefighter SE EFI FLHTCUI// Ultra Classic Shrine SE FLHTCU/// 2004 Harley-Davidson Electra Glide Classic EFI FLHTCI// Classic FLHTC// Classic Shrine SE FLHTC// EFI FLHTI// FLHT// Ultra Classic EFI FLHTCUI// Ultra Classic FLHTCU// Ultra Classic Shrine SE FLHTCU.
Check StockLKV 10.63 ″ Motorcycle Pillion Passenger Pad Seat Rear Cushion with 8 Suction Cups Replacement for Harley Sportster 883 1200 Dyna Custom Chopper
- ...-2008 // FLHTC Electra Glide Classic1998-2008 // FLHTCI Electra Glide Classic1998-2008 // FLHTCU Electra Glide Ultra Classic 2008// FLHTCU Electra Glide Ultra Classic 1998// FLHTCUI Electra Glide Ultra Classic 1998-2008// FLHTI Electra Glide Standard 1998-2008.
- Fit For 2007-2008 Harley-Davidson Electra Glide Classic EFI FLHTCI// Classic FLHTC// EFI FLHTI// FLHT// Ultra Classic EFI FLHTCUI// Ultra Classic FLHTCU// Ultra Classic Firefighter SE EFI FLHTCUI// Ultra Classic Peace Officer SE EFI FLHTCUI// Ultra Classic Shrine SE FLHTCU/// 2006 Harley-Davidson Electra Glide Classic EFI FLHTCI// Classic FLHTC// EFI FLHTI// FLHT// Ultra Classic EFI FLHTCUI// Ultra Classic Firefighter SE EFI FLHTCUI// Ultra Classic Peace Officer SE EFI FLHTCUI.
- Fit For 2005 Harley-Davidson Electra Glide Classic EFI FLHTCI// Classic FLHTC// Classic Firefighter SE FLHTC// Classic Shrine SE FLHTC// EFI FLHTI// FLHT// Ultra Classic EFI FLHTCUI// Ultra Classic FLHTCU// Ultra Classic Firefighter SE EFI FLHTCUI// Ultra Classic Shrine SE FLHTCU/// 2004 Harley-Davidson Electra Glide Classic EFI FLHTCI// Classic FLHTC// Classic Shrine SE FLHTC// EFI FLHTI// FLHT// Ultra Classic EFI FLHTCUI// Ultra Classic FLHTCU// Ultra Classic Shrine SE FLHTCU.
Check Stock