Reviews Machined Aluminum Parts

Woodpeckers Stainless Steel Square - 12" -1282 – 2019

  • LASER ENGRAVED ALUMINUM - The blade on this T Square is made out of precisely machined aluminum that is perfectly fitted to a solid, billet handle with two support lips to prevent tipping and a perfectly machined edge for true squaring..
  • INCLUDED RACK-IT MOUNT - Each T-Square comes in its own Rack-It mount for safe storage and organization..
  • PRECISION - The blade itself has precisely spaced 1MM holes drilled every 1/16”. Stick a pencil in the hole, slide it along your work piece and presto, a perfectly spaced line, accurately following the edge of your stock..
  • AVAILBALE IN 4 SIZES - 4 different sizes are available, 12”, 24”, 600mm and 32”. The 12” size is ideal for work with solid lumber and smaller cabinet parts. The 24”, 600mm and 32” are better suited for work with sheet goods, larger cabinet parts, entertainment centers and bookcases..
  • MADE IN USA - Like all Woodpeckers products, these T-squares are proudly machined and carefully inspected in our Strongsville, OH facility, just south of Cleveland..
Check Stock

Woodpeckers in-DEXABLE DOUBLE SQUARE - STANDARD - 6 INCH BLADE

  • LASER ENGRAVED ALUMINUM - The blade on this T Square is made out of precisely machined aluminum that is perfectly fitted to a solid, billet handle with two support lips to prevent tipping and a perfectly machined edge for true squaring..
  • INCLUDED RACK-IT MOUNT - Each T-Square comes in its own Rack-It mount for safe storage and organization..
  • PRECISION - The blade itself has precisely spaced 1MM holes drilled every 1/16”. Stick a pencil in the hole, slide it along your work piece and presto, a perfectly spaced line, accurately following the edge of your stock..
  • AVAILBALE IN 4 SIZES - 4 different sizes are available, 12”, 24”, 600mm and 32”. The 12” size is ideal for work with solid lumber and smaller cabinet parts. The 24”, 600mm and 32” are better suited for work with sheet goods, larger cabinet parts, entertainment centers and bookcases..
  • MADE IN USA - Like all Woodpeckers products, these T-squares are proudly machined and carefully inspected in our Strongsville, OH facility, just south of Cleveland..
Check Stock

Woodworkers Edge Rule Set - Inch + Edge Rule Rack-It and 4 Stops

  • LASER ENGRAVED ALUMINUM - The blade on this T Square is made out of precisely machined aluminum that is perfectly fitted to a solid, billet handle with two support lips to prevent tipping and a perfectly machined edge for true squaring..
  • INCLUDED RACK-IT MOUNT - Each T-Square comes in its own Rack-It mount for safe storage and organization..
  • PRECISION - The blade itself has precisely spaced 1MM holes drilled every 1/16”. Stick a pencil in the hole, slide it along your work piece and presto, a perfectly spaced line, accurately following the edge of your stock..
  • AVAILBALE IN 4 SIZES - 4 different sizes are available, 12”, 24”, 600mm and 32”. The 12” size is ideal for work with solid lumber and smaller cabinet parts. The 24”, 600mm and 32” are better suited for work with sheet goods, larger cabinet parts, entertainment centers and bookcases..
  • MADE IN USA - Like all Woodpeckers products, these T-squares are proudly machined and carefully inspected in our Strongsville, OH facility, just south of Cleveland..
Check Stock

Woodpeckers Paolini Pocket Rules, 150mm Metric Aluminum Woodworking Ruler with Slide Stops

  • LASER ENGRAVED ALUMINUM - The blade on this T Square is made out of precisely machined aluminum that is perfectly fitted to a solid, billet handle with two support lips to prevent tipping and a perfectly machined edge for true squaring..
  • INCLUDED RACK-IT MOUNT - Each T-Square comes in its own Rack-It mount for safe storage and organization..
  • PRECISION - The blade itself has precisely spaced 1MM holes drilled every 1/16”. Stick a pencil in the hole, slide it along your work piece and presto, a perfectly spaced line, accurately following the edge of your stock..
  • AVAILBALE IN 4 SIZES - 4 different sizes are available, 12”, 24”, 600mm and 32”. The 12” size is ideal for work with solid lumber and smaller cabinet parts. The 24”, 600mm and 32” are better suited for work with sheet goods, larger cabinet parts, entertainment centers and bookcases..
  • MADE IN USA - Like all Woodpeckers products, these T-squares are proudly machined and carefully inspected in our Strongsville, OH facility, just south of Cleveland..
Check Stock

Proforged 105-10044 Billet Aluminum Tie Rod Sleeves - Manual Steering

  • CRAZY STRONG BILLET ALUMINUM TIE ROD SLEEVES. Proforged tie rod adjusting sleeves are machined from a solid bar of billet aluminum for ultimate strength. Every fit surface of these 6061-T6 aluminum sleeves are CNC machined for precision fit and finish - the threads are matched to our tie rod ends, and we recommend using them together for optimal results. These work with most other brands of tie rods, but there are occasional issues when other brands use a different thread tolerance or specification..
  • 1,000,000 MILE WARRANTY. You can install our tie rod sleeves with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none..
  • BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged products - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance chassis parts: Proforged..
Check Stock

Woodpeckers Precision Woodworking Tools RS-2 Rule Stop, 2-Inch

  • Designed to fit rulers up to 2-1/4-inch wide.
  • Knob, screw & post machined from stainless steel.
  • Body parts are aluminum and anodized for decades of accurate performance.
  • Precision machined edges align easily with engraved scale graduations.
Check Stock

Traxxas 8976 Wheelie Bar

  • Machined Aluminum Ball Bearing Wheels with Rubber Tires.
  • Precision 6061-T6 aluminum wheels feature a stunning anodized finish and ride on rubber-sealed 5x8mm ball bearings.
  • Soft compound rubber tire that reduces side-to-side movement for stable, consistent wheelies.
  • Includes 5x8mm ball bearings (4)/ axles (2)/ rubber tires (2).
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
  • This product is made from high quality materials and designed for lasting performance.
  • This is for use on RC vehicles, consult your user's manual for exact parts listings.
Check Stock

For Redcat Blackout Parts Turnbuckle Redcat Blackout Xte Pro Parts 2X Machined Alloy Tie Rod red

  • ✔Replacement of redcat Blackout Parts# BS213-016.
  • ✔Full redcat blackout xte pro parts set turnbuckles.
  • ✔Compatible with Brand name Redcat, BSD Racing Item: RedCat BlackoutSC short-course, XTE Monster Truck, XBE Buggy, BSD Racing monster truck.
  • ✔Hard-anodized colour,CNC machined PTFE-coated hardened alloy 6061-T6 The lightweight aluminum alloy material is durable and improves the overall....
Check Stock

Evike ARES Licensed Remington MSR Bolt Action Spring Powered Airsoft Sniper Rifle Model MSR-338 / Tan

  • ◙ This is not a listing for an individual Airsoft part. No parts are designed for real weapons. Batteries, scopes, and other accessories NOT....
  • Bolt action single shot spring powered rifle.
  • Precision CNC machined aluminum receiver.
  • Precision CNC machined handguard and stock.
  • 545mm Picatinny flat top rail for optics.
Check Stock

Evike EMG/STI International™ DVC 3-Gun 2011 Airsoft Pistol (Model: Standard/Green Gas)

  • ◙ This is not a listing for an individual Airsoft part. No parts are designed for real weapons. Batteries, scopes, and other accessories NOT included unless stated. Please check the bulletpoints AND description below carefully. Federally mandated blaze orange muzzle tip is preinstalled. Some assembly may be required, especially on custom builds and some larger sized Airsoft guns ◙.
  • Highly detailed CNC machined aluminum long slide w/ officially licensed STI rollmarks.
  • CNC machined aluminum frame w/ molded reinforced polymer grips.
  • Molded DVC Stippling pattern provide a comfortable, slip-resistant grip.
  • Extended length barrel w/ gold (imitation TiN) coating.
  • Slide lightening cuts help the slide cycle faster with less felt muzzle flip.
Check Stock