Reviews Machine Screw Thread Dies

Howards End

  • PRECISE MATING OF LOCK RING: Easy-to-use cross bolt connects the two ends of the ring instead of a traditional screw design that tightens directly into the threads of the die, resulting in a more precise mating of the lock ring threads to the die threads..
  • RELIABLE ALIGNMENT: Full size lock ring provides a more reliable alignment with no canting, and no damage to the die threads, which remain undamaged..
  • EASY ADJUSTMENT: Tightening or loosening the steel cross bolt screw requires only a 7/64″ Hex/Allen Key (not included)..
  • STANDARD FIT: The Forster Cross Bold Die Lock Rings fit standard 7/8″-14 thread dies from most manufacturers..
  • FOR FORSTER SEATER & SIZING DIE: Works with all Forster Products high-quality sizing and seater dies. The Forster DIE-G-10 is a direct replacement part for the lock rings on Forster sizing and seater dies..
Check Stock

Press n Snap Tool Ligne Line 24 Snap Setter Upholstery Sewing Cosplay Costuming Leather Work

  • Durable and reliable heavy duty grommet, snap buttons, rivet, eyelet , pearl button hole punch press machine . This machine is an all in one tool..
  • Interchangeable dies, hole punches and supplies ( Grommets, studs, rivets, snaps, jeans button, eyelets, pearl rivets etc) are sold separately..
  • You can punch holes with the interchangeable hole punches on products such as clothes, bags, shoes, belts..
  • This machine uses 6.35 mm (1/4" ) thread size dies. Please make sure that this matches your dies/hole punches thread size. Any doubt? Please contact....
  • There are 3 available colors . A random color of Red, Navy or Blue will be shipped.
Check Stock

WYNNsky Die and Tap Set in SAE and Metric Hex Threading Dies for External Threads Thread Tap for Internal Threads Thread Wrench Thread Pitch Gauge 86 Pieces Gauge Kit for DIY Tapered

  • Threading Dies and Tap Size: Metric Size M3×0.5, M4×0.7, M5×0.8, M6×1.0, M7×1.0, M8×1.0, M8×1.25, M9×1.25, M10×1.25, M10×1.5, M11×1.25, M11×1.5, M12×1.5, M12×1.75, M14×1.5, M14×2.0, M16×1.5, M16×2.0.
  • SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
  • Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
  • Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
Check Stock

Manual Hand Press Hole Punch Machine for Buttons Grommets Snap Buttons Rivets Eyelets Pearl Rivets Fabric Covered Buttons - Press Only! No Dies Included

  • Durable and reliable heavy duty grommet, snap buttons, rivet, eyelet , pearl button hole punch press machine . This machine is an all in one tool..
  • Interchangeable dies, hole punches and supplies ( Grommets, studs, rivets, snaps, jeans button, eyelets, pearl rivets etc) are sold separately..
  • You can punch holes with the interchangeable hole punches on products such as clothes, bags, shoes, belts..
  • This machine uses 6.35 mm (1/4" ) thread size dies. Please make sure that this matches your dies/hole punches thread size. Any doubt? Please contact....
  • There are 3 available colors . A random color of Red, Navy or Blue will be shipped.
Check Stock

10 Piece UNC Pipe Die Set 1/4\

  • 【Function】- There are a variety of ways in which threading dies function.Threading dies cut a male thread and are used with taps that cut the mating female threads..
  • 【Warm Prompt】- Different sizes can be chosen on this listing. Please check what you need before purchasing.
  • 【Advantage】- Threading dies are used to form or cut a male thread on the outside of rods or bars. Threading dies provide precision in cutting and extend the life of a die by reducing wear.
  • Made of heat treated carbon steel, high strength and hardness.
  • 【Application】- Threading dies are commonly used in industrial metal working and for repairing threads in stripped holes or bolts. Rolled threading dies have an increased advantage of strength, longer life, and reduced material cost.
Check Stock

Century Drill & Tool 92920 Rethreading Die, 1-14NF

  • 【Advantage】- Threading dies are used to form or cut a male thread on the outside of rods or bars. Threading dies provide precision in cutting and extend the life of a die by reducing wear..
  • 【Application】- Threading dies are commonly used in industrial metal working and for repairing threads in stripped holes or bolts. Rolled threading dies have an increased advantage of strength, longer life, and reduced material cost..
  • 【Function】- There are a variety of ways in which threading dies function.Threading dies cut a male thread and are used with taps that cut the mating female threads..
  • 【Warm Prompt】- Different sizes can be chosen on this listing. Please check what you need before purchasing..
Check Stock

GEARWRENCH 114 Pc SAE/Metric Ratcheting Tap and Die Set - 82812

  • Ratcheting T handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand over hand turning.
  • Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
  • Ratcheting t wrench works with GEARWRENCH pass thru socket system.
  • Die adapters work with the 3/8inch Drive pass thru ratchet and socket system as well as socket accessories.
  • Auto locking feature allow the tap adapters to be removed safely Blow mold carrying case with tilted tap holders for easy access and storage Set includes 2 ratcheting T handles, 3 sizes of tap adapters and 2 sizes of die adapter, 2 extension adapters and a sliding T for the adapters, a 4mm hex key, 5 screw extractors, SAE and metric thread gauges, and 48 taps and dies in SAE and metric sizes ranging from 4 40 to 3/4” and 3mm to 18mm.
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carb....
Check Stock

1/4\ -20 x 1-1/2\ Hanger Bolts, 8 pack

  • Machine Screw Thread Length: 17mm / 0.67".
  • Material: Carbon Steel construction with zinc plated, provides great corrosion resistance and antirust ability for long service life..
  • Advantage: Good for wooden furniture. Wood screw thread on one end and a machine screw thread on the other end..
  • Applications: Iron furniture, outdoor furniture, household furniture, stair post, wooden guardrail, solid wood furniture, custom furniture, office furniture..
Check Stock

Irwin Tools 7736 Irwin Re-Threading Hex Die-3/8\-24 NF, HCS Left Hand Die-Bulk

  • Made of heat treated carbon steel, high strength and hardness.
  • 【Advantage】- Threading dies are used to form or cut a male thread on the outside of rods or bars. Threading dies provide precision in cutting and extend the life of a die by reducing wear..
  • 【Application】- Threading dies are commonly used in industrial metal working and for repairing threads in stripped holes or bolts. Rolled threading dies have an increased advantage of strength, longer life, and reduced material cost..
  • 【Function】- There are a variety of ways in which threading dies function.Threading dies cut a male thread and are used with taps that cut the mating female threads..
  • 【Warm Prompt】- Different sizes can be chosen on this listing. Please check what you need before purchasing..
Check Stock