Reviews Machine Screw Dies

Howards End

  • PRECISE MATING OF LOCK RING: Easy-to-use cross bolt connects the two ends of the ring instead of a traditional screw design that tightens directly into the threads of the die, resulting in a more precise mating of the lock ring threads to the die threads..
  • RELIABLE ALIGNMENT: Full size lock ring provides a more reliable alignment with no canting, and no damage to the die threads, which remain undamaged..
  • EASY ADJUSTMENT: Tightening or loosening the steel cross bolt screw requires only a 7/64″ Hex/Allen Key (not included)..
  • STANDARD FIT: The Forster Cross Bold Die Lock Rings fit standard 7/8″-14 thread dies from most manufacturers..
  • FOR FORSTER SEATER & SIZING DIE: Works with all Forster Products high-quality sizing and seater dies. The Forster DIE-G-10 is a direct replacement part for the lock rings on Forster sizing and seater dies..
Check Stock

13pcs Watch Press Tool Set with 12 Dies Back Case Closer Watch Repair Tool

  • Easy & quick to fix watch: only three steps - choose two suitable dies, screw them on the press tool, and then press down the handle. Comes with 12 assorted dies: 24, 26, 28, 30, 31, 32, 33, 34, 36, 38, 40 & 42 Snap-on system allows dies to snap on and off quickly High quality compression spring, longer service life,Ideal watch press for closing snap back type watch-cases.
  • Comes with 12 assorted dies: 24, 26, 28, 30, 31, 32, 33, 34, 36, 38, 40 & 42.
  • Snap-on system allows dies to snap on and off quickly.
  • High quality compression spring, longer service life,Ideal watch press for closing snap back type watch-cases.
Check Stock

Hi-Spec 39 Piece Metric Tap & Die Set. Complete M3 to M12 Fine & Coarse Tools to Cut, Chase and Thread with Screw Pitch Gauge in a Tray Case

  • CLEAN CUT RESULTS: Start DIY garage and workshop tapping and threading with the Hi-Spec 39 Piece Metric Tap and Die Tool Set. Whether its internal or external rethreading, cut new material, chase damaged or old screws, repair rusty nuts, bolts and spark plugs.
  • 34 PIECE METRIC SIZES: Most popularly used coarse and fine thread sizes and pitches of three and four flute tapered and plugged taps and dies. Metric Tap and Dies: 8 thread sizes from M3 to M12 with 16 pitch sizes plus NPT (1/8-27).
  • GOES THROUGH METALS: For materials such as carbon alloy steels, cast iron, aluminium, brass and bronze. Using premium GCr15 Alloy steel, a high carbon chromium bearing steel with high Rockwell hardness, contact fatigue performance, and corrosion resistance.
  • 3 TAP & DIE WRENCH HANDLES: Just fix the tap or dies tools into the steel alloy wrench handles with adjustable fittings and get turning. Includes a handy mini-screwdriver to assemble and fix the dies.
  • SCREW PITCH GAUGE: Easily and accurately measure the pitch or lead of a screw thread with the 16-Blade Screw Pitch Gauge. All tools and accessories are kept tidy and organised in a slimline case for simple storage and carry.
Check Stock

IRWIN Tap And Die Set with Drill Bits Machine Screw/SAE/Metric 117-Piece 26377

  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair.
  • Constructed of high carbon steel for durability.
  • Puts commonly needed taps, dies, drill bits, and extractors at your fingertips.
  • Perfect set for the professional craftsman.
  • Contains 117 of the most commonly needed machine screw plug tap and hex die sizes, drill bits, spiral screw extractors, an adjustable handle tap wrench, 2-in-1 tap wrench, t-handle wrench, pitch gauges, and a plastic case.
Check Stock

FLKQC 13 Piece Watch Press Set | Watch Back Press Watch Back Case Closer Include 12 Dies with Metal Inserts

  • Easy & quick to fix watch: only several steps - choose two suitable dies, screw them on the press tool, and then press down the handle.Steps to use: 1.Find a die that is larger than the glass surface. 2.Find a die smaller than the glass surface. 3.The big die is below, the small die is on the top. 4.Install the two dies you choose on the watch press. 5.Adjust your watch to a good position,, then place the cover up on the watch press. 6.Gently press the handle to close the watch back cover..
  • Comes with 12 dies allowing for 50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm..
  • Reminders:1) Before using this tool to close the watch back cover, you must choose the most suitable dies.2）It is better to pad a cleaning cloth under the watch for protection while closing the watch back cover.3）Place the watch on the bottom die and make sure it is in the correct position before closing the watch back cover. 4）Please read the instructions or use tutorial in the product's page carefully before use..
  • High quality compression spring, longer service life,Ideal watch press for closing snap back type watch-cases.
  • ABS plastic dies with a metal screw in the middle make it more durable, and won't scratch your watch.Bonus cleaning cl....
Check Stock

Watch Press Tool, TOPWAY Watch Back Press is Suitable for Watches(18-50mm). Watch Case Press (with 12 dies) for Closing Watch Back Cover and Watch Opener Knives for Watch Battery Replacement Tool Kit

  • ...s are marked with dimensions, helping you quickly find the right die and improve work efficiency..
  • 【Easy operation】This watch press set back case closer only takes 3 steps to close the watch back cover - Firstly, select 2 suitable dies and screw them on the watch press machine. Secondly, put the cleaning cloth on the lower die and the watch on the cleaning cloth. Thirdly, press the press tool at this time to complete the operation. It should be noted that the lower mold need to be larger than the watch glass, and the upper mold need to be smaller than the watch back cover ..
  • 【Well-made】This watch case press manchine is made of high-hardness aluminum, equipped with a thickened spring.It is easy to exert force with lever principle design. 12 dies are made of ABS material which is smooth to avoid damage to the watch. The replaceable die has metal screws in the middle to avoid wear and tear from repeated use..
  • 【Rational Choice】Every watch lover needs to have this watch press kit. It is an ideal tool for repairing your watch, which can save you time to go to a watch repair shop. This watch press set is also a nice va....
Check Stock

Hi-Spec 39 Piece SAE & Metric Tap & Die Set. Complete M3 to M12 \\/ #4 to 1\\/2in Fine & Coarse Tools to Cut, Chase and Thread with Screw Pitch Gauge in a Tray Case

  • CLEAN CUT RESULTS: Start DIY garage and workshop tapping and threading with the Hi-Spec 39 Piece SAE & Metric Tap and Die Tool Set. Whether its internal or external rethreading, cut new material, chase damaged or old screws, repair rusty nuts, bolts and spark plugs.
  • 34 PIECE SAE & METRIC SIZES: Most popularly used coarse and fine thread sizes and pitches of three and four flute tapered and plugged taps and dies. SAE & Metric Tap and Dies: 16 thread sizes from M3 to M12 and #4 to 1/2in with 16 pitch sizes plus NPT (1/8-27).
  • GOES THROUGH METALS: For materials such as carbon alloy steels, cast iron, aluminium, brass and bronze. Using premium GCr15 Alloy steel, a high carbon chromium bearing steel with high Rockwell hardness, contact fatigue performance, and corrosion resistance.
  • 3 TAP & DIE WRENCH HANDLES: Just fix the tap or dies tools into the steel alloy wrench handles with adjustable fittings and get turning. Includes a handy mini-screwdriver to assemble and fix the dies.
  • SCREW PITCH GAUGE: Easily and accurately measure the pitch or lead of a screw thread with the 16-Blade Screw Pitch Gauge. All tools and accessories are kept tidy and organised in a slimline case for simple storage and carry.
Check Stock

Cable Lug Crimping Tool,Knoweasy Battery Cable Lug Crimper for Heavy Duty Wire Copper Lugs AWG 10,8,6,4,2,1/0

  • ✅【Rotate Crimp Dies:】The Wire Crimper is built in 6 AWG standard dies:6/10/16/25/35/50 mm² ( 10, 7, 5, 6, 2, 1AWG ),Hexagonal rotating dies processed with Wire EDM Cutting,more accurate than normal casting dies.
  • ✅【Durable Tool: 】This battery cable crimper is made of high quality carbon steel ,durable and sturdy to use, suitable for home and electrical crimping work.
  • ✅【Easy Operation: 】Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs.
  • ✅【Comfortable Handles Design:】Long handle of cable crimper results in less efforts when crimping,it saves strength and improves user’s experience.
  • ✅【Application&Compatible:】Widely used in Copper，Aliuminum Cable lug and Non-Welding&Standard Electrical Connection.
  • Compatible with most of connectors from Blackburn,Burndy,ILSCO,Pamduit,T&B,etc..
Check Stock

Irwin Hanson 9740 1\ 10mm-1.5 Hexagon Metric Die

  • ..., 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
  • Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
  • Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
  • T Handle Tap Wrench: T Handles hold the end of a tap to provide extra leverage for hand tapping making them very useful for confined spaces or where extra reach or leverage is required. T Handle Tap wrenches may also be used with screw extractors, drills, and other tools..
  • Material: Taps and dies are used to cut metals and are typically made of high-speed steel or hardened carbon steel, with the former is much....
Check Stock

Battery Terminal Crimping Tool,Knoweasy Battery Cable Lug Crimper with Wire Cutter for Heavy Duty Wire Copper Lugs AWG 10,8,6,4,2,1/0

  • ✅【Rotate Crimp Dies:】The Wire Crimper is built in 6 AWG standard dies:6/10/16/25/35/50 mm² ( 10, 7, 5, 6, 2, 1AWG ),Hexagonal rotating dies....
  • ✅【Durable Tool: 】This battery cable crimper is made of high quality carbon steel ,durable and sturdy to use, suitable for home and electrical....
  • ✅【Easy Operation: 】Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal....
  • ✅【Comfortable Handles Design:】Long handle of cable crimper results in less efforts when crimping,it saves strength and improves user’s....
  • ✅【Application&Compatible:】Widely used in Copper，Aliuminum Cable lug and Non-Welding&Standard Electrical Connection.
Check Stock