Reviews Machine Gear Oil

CNCEST Outboard Boat Motor Engine Inflatable Boat Fishing Boat Engine Power for Sailboats Small Yachts

  • 【2 Stroke 3.5HP Outboard Motor】- VONZOER 2 Stroke 3.5HP Outboard Motor, superior engine with water cooling CDI system to improve the reliability of the whole machine. Fuel saving, quick start, strong horsepower, low noise, superior performance, environmental protection, durable and compact structure, forward design..
  • 【Wide Applications】- VONZOER outboard boat motor is great for inflatable boats, small yachts, fishing boats and sailboats or used as an auxiliary trolling motor. It is suitable for both saltwater and freshwater..
  • Full throttle perating range: 4000-5000r/min.
  • Recommended fuel: Regular unleaded gasoline.
  • 【Warm Note】- Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours). Our outboard motor doesn't with gear oil, please prepare it by yourself.
Check Stock

Outboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • 2-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adop....
Check Stock

Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
Check Stock

HYYKJ Outboard Motor Boat Engine 6 HP 2 Stroke 102CC Outboard Motor Marine Inflatable Fishing Boat Engine with CDI Water Air Cooling System 16'' Shaft (6HP 2 Stroke 102CC 16'' Shaft)

  • 6HP 2 STROKE OUTBOARD MOTOR】Water Cooling Technology To Improve The Reliability Of The Whole Machine. Features 360 degree steering rotation for reverse without gear shifting. Convenient Use and Easy Operation, Travel Safer, More Reliable, More Corrosion Resistant, More Beautiful, More Durable, More Energy Efficient, More Environmentally Friendly..
  • 【MAIN PARAMETER 1】Short shaft: 40cm/ 15.7''.
  • Full throttle operating range: 5000-6000r/min.
  • Idling speed ( in neutral): 1000±100 r/min.
  • Recommended fuel Regular unleaded gasoline.
  • Engine oil mixing ratio Fuel 50: Engine oil 1.
  • Spark plug: 25.0Nm(18.4 ft-lb) (2.55 kgf-m).
  • Engine oil drain bolt: 18.0Nm(13.3 ft-lb) (1.84 kgf-m).
  • Package size: 112cm x 54cm x 39cm (44'' x....
Check Stock

NEWTRY 10mm Commercial Meat Cutter Machine, Meat Cutting Slicer, Electric Shredder, 850W 330LBS/H, Stainless Steel, for Pork Beef Chicken Breast (with a 10mm blade)

  • [WHAT DO I NEED TO CONSIDER]---This meat cutter is perfect for boneless fresh meat. Please note that the meat cutting machine can not cut meat with bone, frozen meat, hard vegetables, like carrots, potatoes, etc. The voltage of the commercial meat slicer is 110V US plug. The size of the blade is equal to the thickness of the meat after cutting. This meat shredder has one year warranty under normal use. If you are not sure the size of the blade, please contact us freely..
  • [WHAT ARE THE PARAMETERS]---Machine capacity:330lb/h.
  • Feed port:110x70mm (4.3’’X2.75’’).
  • Product materials: all 304 stainless steel.
  • Gear: ABS plastic gear to reduce noise and stainless steel gear to enhance power..
  • [HOW TO CLEAN THE MACHINE]---Please cut some soft vegetables until the vegetables are clean before first use since there is protective oil on the blade. Please clean the commercial meat cutter after each use. Pour water directly to clean the blade, please don’t wash the motor. Use the water gun in the package to flush out the stuck minced meat on the blade. Apply some cooking oil on the blade after cleaning..
  • [HOW TO CUT MEAT INTO STRIPS AND CUBES]---850W powerful motor enables the restaurant meat ....
Check Stock

TBVECHI 3.5HP 2-Stroke Outboard Motor Boat Engine Water Cooling System CDI Heavy Duty

  • ►【Using 2 Stroke Power, 3.5HP】Water Cooling Technology To Improve The Reliability Of The Whole Machine. Features 360 degree steering rotation....
  • ►【Convenient Use and Easy Operation】Travel Safer, More Reliable, More Corrosion Resistant, More Beautiful, More Durable, More Energy Efficient,....
  • ►【Compact Design, Fuel Saving, Large Tank Capacity】Fuel saving, strong horsepower, superior performance, environmental protection, durable..
  • ►【Application】Perfect match inflatable boats, fishing boats, sailboats, and small yachts.Performance More Superior,quick start,positions the....
  • ►【Notice】Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to....
Check Stock

TFCFL 4 Stroke 6.0HP Electric Outboard Motor,Outboard Motor Boat Engine Water Cooling CDI System,Heavy Duty Inflatable Fishing Boat Engine 3.75KW 2500 R/MIN

  • 【2 STROKE 6 HP OUTBOARD MOTOR BOAT ENGINE】2 stroke 6HP power, Water cooling technology to improve the reliability of the whole machine. Superior engine water cooling system for improved engine performance Made of special high-strength aluminum alloy material with high hardness, strong durability, good rust and corrosion resistance..
  • 【SIZE & PREFORMANCE】Overall length 1040mm(40.9 in).
  • Full throttle operating range 5000-6000r/min.
  • Idling speed ( in neutral) 1000±100 r/min.Engine oil mixing ratio Fuel 50: Engine oil 1.
  • Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m).
  • Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m)..
  • 【WIDE APPLICATION】Perfect match inflatable boats, fishing boats, sailboats, and small yachts.(The outboard motors are all installed on the stern straight plate and cannot be installed in other places).
  • 【WARM TIPS】Please add gear oil to the gears before use the motor and replace gear o....
Check Stock

Mophorn Flush Machine DC12V 0-60PSI Automatic Transmission Fluid Exchanger Heavy Duty Transmission Flush Machine for Small Gasoline Motor Car and Diesel Vehicle

  • Auto Transmission Flush Machine: Driving Force: (Electric) DC12V.
  • effectively protect the gear-box and remove the grease and metal fillings..
  • Scope: Middle, small gasoline motor car & diesel vehicle.
  • change the oil by the power of gear-box and the exchanger..
  • The transmission oil exchanger has the vehicle in and out of the service bay in less than 15 minutes.
  • easy convenient and no damage to other engine components..
  • The automatic refrigerant refill feature maintains a user-selectable amount of refrigerant in an internal vessel and signals when it's time to change supply tank, no monitoring required..
Check Stock

CGOLDENWALL 850W Sheep Shears Electric Sheep Clipper, Farm Livestock Grooming Clipper Kit, Heavy Duty Animal Hair Trimmer for Goats Alpaca Sheep, 13-Straight-Teeth Blade

  • NO LUBRICATING OIL INCLUDED: due to shippment restriction, the lubricating oil had been removed before shipment. Please purchase the sewing machine oil separately, as the lubricating oil for this sheep clipper..
  • 6 GEAR SPEED AVAILABLE: The sheep shear has 6 speeds for option, which can be adjusted according to the actual demand and the user's operating familiarity. Generally, shearing the parts of neck and legs requires 1-3 gear of speed, the 4-6 gear of speed suits for clipping the parts of back, abdomen and buttocks..
  • 850W STRONG POWER- the motor is made of high-temperature-resistant all-copper wire set, whose power consumption is ultra-low. High temperature resistance, with 850W power and 2400 RPM speed, easy operation, suitable for family breeding or pasture breeding..
  • 13 STRAIGHT TEETH BLADE: the default type of blade for this sheep clipper kit is 13-straight-teeth blade, which is more friendly to the beginners. The tightness of the blade is adjustable according to the exact situation. There are four types of blade can choosing from, if you wanna other types of blade, please contact us separetely..
  • SHARP SAFE AND DURABLE: the blade is made of high-strength refined carbon steel, which can ensure the sharpness, durabiliy and the safety of the sheep gr....
Check Stock

CGOLDENWALL 850W Sheep Shears Electric Sheep Clipper, Farm Livestock Grooming Clipper Kit, Heavy Duty Animal Hair Trimmer for Goats Alpaca Sheep, 13-Straight-Teeth Blade

  • NO LUBRICATING OIL INCLUDED: due to shippment restriction, the lubricating oil had been removed before shipment. Please purchase the sewing machine oil separately, as the lubricating oil for this sheep clipper..
  • 6 GEAR SPEED AVAILABLE: The sheep shear has 6 speeds for option, which can be adjusted according to the actual demand and the user's operating familiarity. Generally, shearing the parts of neck and legs requires 1-3 gear of speed, the 4-6 gear of speed suits for clipping the parts of back, abdomen and buttocks..
  • 850W STRONG POWER- the motor is made of high-temperature-resistant all-copper wire set, whose power consumption is ultra-low. High temperature resistance, with 850W power and 2400 RPM speed, easy operation, suitable for family breeding or pasture breeding..
  • 13 STRAIGHT TEETH BLADE: the default type of blade for this sheep clipper kit is 13-straight-teeth blade, which is more friendly to the beginners. The tightness of the blade is adjustable according to the exact situation. There are four types of blade can choosing from, if you wanna other types of blade, please contact us separetely..
  • SHARP SAFE AND DURABLE: the blade is made of high-strength refined carbon steel, which can ensure the sharpness, durabiliy and the safety of the sheep gr....
Check Stock