Reviews M10 X 1 25 Thread Repair

10Pcs M12 to M8 Thread Reducer Nuts, Stainless Steel Repair Sleeve M8 Female Thread M12 Male Thread Conversion Kit Suitable for for Plumbing Connections Compressed Air Hydraulic Automobile

  • Made of 303 Stainless Steel: The reducer nut is made of durable 303 stainless steel, which is resistant to high temperature, strong and wear-resistant.
  • Wide Range of Uses: Repair nut is an industrial fastening part, mostly used in conjunction with screws or bolts. If a thread error occurs or a damaged threaded hole is repaired, a repair nut can be used to effectively repair the threaded hole.
  • Recommendations for Use: If the M8 thread is very slippery, if you want to continue to use the M8 thread after the repair, use this method to expand the M8 thread to M10 thread, and then use the M8-M10-12 length reducer to change it back to M8, because this reduces the diameter The material is stainless steel, which will make the M8 thread stronge.
  • Wide Range of Applications: These repair nuts are widely used in aviation, automobiles, electronic communications, computers, molds, mechanical equipment and other manufacturing fields.
  • Thread Size Standard: Internal thread M8 x 1.25.
  • length: about 18 mm/0.7 inches. The thread is clear, and the thread sliding tooth restoration is more accurate.
Check Stock

Compression Tester Automotive - 8PCS Engine Cylinder Pressure Gauge for Petrol Gas Engine Automotive Tool Gauge for Car & Truck

  • ...1x straight push-on connectors, 1 x angled push-on connectors, 4x brass adapters with metric male fittings & O-rings: Manometer with two test pressure: 0 - 300 PSI / 0 - 21 kg / CM². Hose overall length: 430mm, pressure tube length: 153mm, angled pressure tube length: 155mm. Pressure gauge diameter: 75mm, four thread size: M10 x 1.0mm, M12 x 1.25mm, M14 x 1.25mm, M18 x 1.5mm. M10 thread is suitable for motorcycles, M12 / M14 / M18 threads are suitable for car..
  • 【100% SATISFACTION】: We are responsible for every product. If you have any problems with our products or services, please contact us immediately and we will provide you with exceptional responses to your every concern..
Check Stock

Irwin Hanson 9740 1\ 10mm-1.5 Hexagon Metric Die

  • Threading Dies and Tap Size: Metric Size M3×0.5, M4×0.7, M5×0.8, M6×1.0, M7×1.0, M8×1.0, M8×1.25, M9×1.25, M10×1.25, M10×1.5, M11×1.25, M11×1.5, M12×1.5, M12×1.75, M14×1.5, M14×2.0, M16×1.5, M16×2.0.
  • SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
  • Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
  • Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
Check Stock

Aceteel 1/2\-28 UNEF HSS Tap And Die Set, 1/2 x 28 UNEF Machine Thread Tap And Round Thread Die Right Hand

  • Durable material: the tap and die set is made of alloy steel and metal, rugged and durable, can be applied for a long time.
  • Equipped with storage box, tap die tool set is easy to store and organize and use..
  • Practical repair tools: the thread tap set can help you to repair partially damaged nuts, bolts and threads.
  • When your worn-out screws are rusty and can no longer match your machine, this set can help you easily eliminate the flaws on the threads.
  • Fine craftsmanship: the polished thread tap kit is made with advanced technology and craftsmanship, which can fit nicely with screws.
  • In addition, after being treated with a corrosion-resistant satin finish, the thread cutting friction is smaller and the surface becomes stainless steel, making it to be more bright and textured.
  • Size information: the package comes with 9 x metric taps and 9 x metric dies in different specifications, namely, M3 (0.5 mm)/ M4 (0.7 mm)/ M5 (0.8 mm)/ M6 (1 mm)/ M7 (1 mm)/ M8 (1.25 mm)/ M9 (1.25 mm)/ M10 (1.5 mm)/ M12 (1.75 mm).
  • Adjustable tap wrench handle measures about 19.5 cm/ 7-11/16 inch long, suitable for M3 to M12 (1/16 to 1/2 inch), and the die wrench handle is about 20 cm/ 7-7/8 inch long, suitable for M25 (1 inch).
  • Suitable for beginners and skilled people: this tooth ....
Check Stock

EilxMag 110PCS Hardened Alloy Steel Metric Tap and Die Rethreading Tool Set - Cutting External & Internal Threads with Storage Case (Pakage)

  • ...ardened alloy steel for maximum strength, durability and longevity. Heavy-duty plastic blow-molded carrying case for easy transport, safe storage & quick organization. Tapered teeth design to start threading easily and smoothly and prevent overthreading..
  • 【Wide applications & Quality guarantee】: suitable for the repair of new threads or damaged threads on most metals such as carbon steel, cast iron, aluminum, brass, copper and stainless steel. We promise one year warranty, if you encounter problems can contact us at any time..
Check Stock

Anchor Studs, 8 mm x 165 mm, Pack of 4

  • Package Content: 2 x Car Repair Expansion Bolt.
  • Thread Size: M10 x 37mm/0.4" x 1.5"(D*L).
  • Flat Washer Size: 20 x 2mm/0.8" x 0.08"(D*T).
Check Stock

Highking Tool 131 pcs Stripped Thread Rethread Recoil Repair Kit Metric M5 M6 M8 M10 M12

  • 1，Standard M10 x 1.0 thread repair kit,Provided Insert length is 17mm..
  • Spark Plug Repair usually used in vehicles where the spark plug is close to the surface.
  • 3,More suitable for harsh and narrow working areas,suitable for any DIY metal parts or woodworking threaded links required to insert screw sleeves..
  • 4,Contrary to the phenomenon of tooth disorder and extraction often occurred in traditional thread thread sleeves,this set of tools will not occur, even newcomers can easily complete them in the shortest time..
  • 5,Complete package includes: 1 Drill, 1 conterbore, 1 tap, 1 install driver 5 inserts 17mm length..
Check Stock

Toolly 32pcs Tap and Die Set, Metric Hardened Steel Tool Set, Essential Threading & Rethreading Tool with Storage Case Perfect for Auto and Machinery Repair

  • 【32pcs Tap and Die Set】The package includes 28pcs (each size including 1x taper tap, 1x second tap, 1x plug tap and 1x die): M3 X 0.5, M4 X 0.7, M5 X 0.8, M6 X 1.0, M8 X 1.25, M10 X 1.5, M12 X 1.75.
  • 1 x Tap Wrench, 1 x Die Stock Wrench, 1 x Thread Pitch Guage, 1 x Screwdriver, to cover all your needs..
  • 【Product Function】Tap and die set in metric is perfect for rethreading fasteners, fastener holes for auto and machinery repair. Threading tool with storage case, can greatly increase your productivity and act as an important part to your work..
  • 【Tapered Teeth Design & Versatility】Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily. Perfect for creating new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel..
  • 【High Quality & Durable】Tap and die set adopts premium hardened steel material. The screw thread tapping tool is durable to use. The better the material the tougher the tap and die so they ensures durability and tool longevity to withstand professional uses..
  • 【SIZE LABLED】All of them are clearly labled with size for you to find quickly, and be able to pull the right size out of the box when you ....
Check Stock

Carrfan Adjustable Gear Shift Knob Extender Height Lever Extension Car Gear Shifter Extender Kit with 4 Adapters

  • The material of shift knob extender is aluminum that can reduce friction and make shifting even smoother..
  • The offset elbow of the shifter can be rotated to several different positions..
  • This shift knob extender is highly adjustable, shifter height is adjustable..
  • Thread specifications: M8 * 1.25, M10 * 1.25, M10 * 1.5, M12 * 1.25..
  • Gear shifter (adapter) Thread specifications: M8*1.25, M10*1.25, M10*1.5..
Check Stock

WYNNsky Die and Tap Set in SAE and Metric Hex Threading Dies for External Threads Thread Tap for Internal Threads Thread Wrench Thread Pitch Gauge 86 Pieces Gauge Kit for DIY Tapered

  • Threading Dies and Tap Size: Metric Size M3×0.5, M4×0.7, M5×0.8, M6×1.0, M7×1.0, M8×1.0, M8×1.25, M9×1.25, M10×1.25, M10×1.5, M11×1.25, M11×1.5, M12×1.5, M12×1.75, M14×1.5, M14×2.0, M16×1.5, M16×2.0.
  • SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
  • Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
  • Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
Check Stock