Reviews Luthier s Feeler Gauge

CAMWAY 2Pcs Feeler Gauge Set Stainless Steel Metric/Inch 32 Straight Blade Steel Feeler Gauge,16pcs Feeler Gauge and 45º Blades Offset for Measuring Gap Width/Thickness Measuring Tools

  • 【Two Kinds of Feeler Gauge 】Feeler gauge set, straight feeler gauge with 32 pieces blades and 16-Piece blades offset valve bent feeler gauge..
  • 【Metric and Imperial Dual Marked】Dual marked metric and imperial the specification of every blade was clearly marked on the surface with laser technology so that you could easy identification the Feeler and choose the suitable one conveniently..
  • 【 360-degree Swivel Design 】The Feeler Gauge Set allows you to unfold or fold them easily and carry them with you. You could disassembled into a separate feeler gauge to use by adjusting the screw.Metal fastening screws,and durable..
  • 【Anti-rust 65 Manganese Steel】There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, And Please don't put on the humid environment..
  • 【Use for】The feeler gauge is used to measure the gap size. When checking whether the measured size is qualified, you can use this method to judge, or the inspector can judge according to the tightness of the feeler gauge and the measured surface.It is mainly used for checking the gap value between two joint surfaces..
Check Stock

2 Pieces Steel Feeler Gauge Dual Marked Metric and Imperial Measuring Tool (32 Blades Feeler Gauge, 16 Blades Feeler Gauge)

  • Feeler gauge set: 2 pack feeler gauges, made of 65 manganese steel, the measuring feeler gauge has 32 blades thickness and 16 blades thickness.
  • Foldable, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, 0.0015 inch/ 0.04 mm to 0.02 inch/ 0.508 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): the 32 blades feeler gauge owns 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88.
  • The 16 blade feeler gauge owns 0.127, 0.152, 0.178, 0.203, 0.229, 0.254, 0.279, 0.305, 0.330, 0.356, 0.381, 0.406, 0.432, 0.457, 0.483, 0.508.
  • Inch sizes: the 32 blades feeler gauge owns 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035.
  • The 16 blade feeler gauge owns 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020.
  • Warm notice: there is some anti-rust oil on the stainless steel ....
Check Stock

2Pcs Feeler Gauge Set Stainless Steel Metric/Inch 32 Straight Blade Steel Feeler Gauge, 16Pcs Feeler Gauge and 45º Blades Offset for Measuring Gap Width/Thickness Measuring Tools

  • Feeler gauge set: 2 pack feeler gauges, made of 65 manganese steel, the measuring feeler gauge has 32 blades thickness and 16 blades thickness.
  • Foldable, easy and convenient to take and store.
  • Metric and Imperial Dual Marked：Dual marked metric and imperial the specification of every blade was clearly marked on the surface with laser technology so that you could easily identify the Feeler and choose the suitable one conveniently..
  • 360-degree Swivel Design：The Feeler Gauge Set allows you to unfold or fold them easily and carry them with you. You could disassembled into a separate feeler gauge to use by adjusting the screw.Metal fastening screws,and durable..
  • Reminder: There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, And Please don't put on the humid environment..
  • Use for：The feeler gauge is used to measure the gap size. When checking whether the measured size is qualified, this method can be used to judge, or it can be judged by the inspector according to the tightness of the feeler gauge and the measured surface. Mainly used to check the gap value between two joint surfaces..
Check Stock

Feeler Gauge PZRT 2pcs 0.1mm and 2pcs 0.2mm Metric Thickness Feeler Gauge Gap Measuring Tool Metric Filler Thickness Gage Measurement Tool

  • Spring steel feeler gauge, strong toughness, overall heat treatment, smooth surface, no burrs and not easy to hurt hands..
  • Two different feeler gauge thickness: 0.1mm.0.2mm, size: 100x10mm.
  • Easy to store: With hanging holes for easy storage, the feeler gauge is small in size and easy to carry, you only need to put it in the bag..
  • Scope of application: The feeler gauge can be used for designers, engineers, and mechanics to measure gaps in tappets, valves, tappets, spark plug gaps, piston rings, brake bands and other gaps..
  • The package includes: 2 feeler gauges with a thickness of 0.1mm and two feeler gauges with a thickness of 0.2mm..
Check Stock

Spurtar 32 Blades Stainless Steel Feeler Gauge Dual Marked SAE and Metric Valve Thickness Gauges Measurement Tool for Measuring Gap Width or Thickness 0.001-0.04 / 0.03-1.00mm

  • Easy identification- dual marked metric and imperial, 0.001inch to 0.04inch (0.03mm to 1mm), the numbers of size are etched into feeler gauge for easy identification.
  • User Friendly- The edge of the feeler gauge is steel and polished. It's full of bright metal texture specially treated, smooth and doesn't hurt your hand.
  • Foldable- Feeler gauges fold into a plated steel case with a thumbscrew, easy to carry, convenient to take and safe to store.
  • Tapered feeler gauge set is made of high quality flexible 65 manganese steel, hardened and polished for long time and accurate usage.
  • The Feeler Gauge Set is coated with vaseline. With this protection, the feeler gauge doesn't get rusty and easy to open..
Check Stock

ZUZUAN 1 Pack Feeler Gauge with 32-Blade and 1 Pack Offset Feeler Gauge with 16-Blade, Gauge Dual Marked Metric and Imperial Gap Measuring Tool

  • ✔Feeler Gauge Sets: Including 65 manganese steel feeler with 32-blade and offset feeler gauge with 16-blade, made of 65 manganese steel, 65 manganese steel is more resistant to wear&tear and has higher strength than stainless steel, features high precision and hardness, good elasticity and wear resistance..
  • ✔Easy to identify: metric and imperial double marking, laser technology etched out the size of the number, in light at a glance its specifications, easy to identify..
  • ✔Feeler Gauge with 32-Blade Measurement: 0.0015 inch to 0.035 inch(0.04 mm to 0.88 mm), please see the second picture for size details.Offset Feeler Gauge with 16-Blade Measurement: 0.005 inch to 0.020 inch (0.127 mm to 0.508 mm), please see the third picture for size details..
  • ✔Unique Design: The blades are bound within a chromed-blade protector to prevent loss of individual blades, designed with a thumb notch for easy selection and expansion, and it can be moved 360 degrees and disassembled if you want to use one alone..
  • ✔NOTICE:This product is a feeler gauge, used to measure the size of the gap spacing. If you need to measure the thickness of some articles, you can buy the wire diameter gauge of our shop, which has the supporting thickness gauge. Thank you for your cooperati....
Check Stock

Stainless Steel Feeler Gauge Measuring Tool Dual Marked Metric and Imperial Measuring (0.02-1.00 mm,Short 17 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 17 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0008 inch/ 0.02 mm to 0.0394 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.02, 0.03, 0.04,0.05,0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25 0.30, 0.40, 0.50, 0.75, 1.00.
  • Inch sizes: 0.0008-0.0394 inch, various sizes bring convenience when measuring.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

23 Blades Steel Feeler Gauge Dual Marked Metric and Imperial Gap Measuring Tool

  • ▲Feeler Gauge Set - Made of 65 Manganese Steel, Each Measuring Feeler Gauge has 23 Blades Thickness.
  • Foldable Feeler Gauges, Easy and Convenient to Take and Store..
  • ▲Easy Identification - Dual Marked Metric and Imperial, 0.0007 inch/ 0.02 mm to 0.0039 inch/ 0.10 mm, the Numbers of Size are Etched into Feeler Gauge for Easy Identification..
  • ▲Metric Sizes (mm) - 0.02, 0.03, 0.04, 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95, 0.10..
  • ▲Inch Sizes - 0.00078,0.00197,0.00394,0.00591,0.00787,0.00984,0.01181,0.01378,0.01575,0.01772,0.01968,0.02165,0.02362,0.02559,0.02756,0.02953,0.03149,0.03346,0.03543,0.0374,0.03937..
  • ▲Warm Notice - There is Some Anti-rust Oil on the Stainless Steel Feeler Gauge to Prevent it from Rusty, Please don’t Worry About That..
Check Stock

Stainless Steel Feeler Gauge Measuring Tool Dual Marked Metric and Imperial Gap Measuring (0.05-1.00 mm, 20 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 20 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.002 inch/ 0.05 mm to 0.04 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.05 to 1 mm, various sizes bring convenience when measuring.
  • Inch sizes: 0.002, 0.004, 0.006, 0.008, 0.010, 0.012, 0.014, 0.016, 0.018, 0.020, 0.022, 0.024, 0.026, 0.028, 0.030, 0.032, 0.034, 0.036, 0.038, 0.040.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Measuring Tool (0.02-1.00 mm, 17 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 17 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0007 inch/ 0.02 mm to 0.039 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.02, 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.40, 0.50, 0.75, 1.00.
  • Inch sizes: 0.0007, 0.001, 0.0016, 0.002, 0.0024, 0.0028, 0.0031, 0.0035, 0.0039, 0.006, 0.008, 0.009, 0.011, 0.015, 0.019, 0.029, 0.039.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock