Reviews Ls Comp Cam

GSKMOTOR Rocker Arms Trunion Repair Upgrade Kit Replacemnt for Chev Pontiac LS 4.8 5.3 5.7 6.0 6.2 LS1

  • Economical and practical：These COMP Cams GM LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller trunions for high-rpm race applications. These are more economical than new race rocker arms, and can handle much higher RPM than the factory ones..
  • FITMENT: for 1997-NOW LS1/LS2/LS3/LS6/LS7 4.8/5.3/5.7/6.0/6.2/7.0 Engines.
  • for 1997-2004 Chevrolet/for 1998-2002 Pontiac.
  • Easy to install: Installation is fairly simple with the use of a press or a simple vise along with basic hand tools..
  • Listing included:-16 rocker arm trunnions- LS-type retrofit.
  • 32 rocker arm bearings- LS-type retrofit.
  • 32 rocker arm retaining rings- LS-type retrofit.
  • Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..
Check Stock

Brian Tooley Racing BTR Vortec Truck Stage 2 Cam and Spring Kit 4.8 5.3 6.0 Includes Beehive Springs and Michigan Motorsports Valve Seals

  • Brian Tooley Racing BTR Truck Stage 2 Camshaft Kit 4.8 5.3 6.0 Camshaft and Beehive Springs and Michigan Motorsports Valve Seals.
  • The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 2 Truck Cam, Beehive Springs and Michigan Motorsports Valve Seals.
  • These Vortec Truck cams use a 3 bolt cam gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available..
  • The Stage II cam has more of a noticable idle, with even more average torque production than the Stage I cam, at the sacrifice of some low end torque and fuel mileage..
  • This is the largest cam we recommend to run with stock 4L60E converter in a 4.8/5.3. Specs are 212/218 .553/.553 111.
Check Stock

DNJ TK1116B Timing Chain Kit for 2009-2010 / Chrysler, Dodge / 300, Avenger, Charger, Sebring / 2.7L / DOHC / V6 / 24V / 167cid

  • C5R GM Timing Chain Set LS1 LS2 LS3 LS6 LM7 LQ4 4.8 5.3 5.7 6.0 6.2 7.0.
  • This is the same chain used in the C5-R and C6-R racing engines built by Katech..
  • Never broken in all of C5-R racing and durability testing.
  • Fits all Gen 3 and 4 GM LS-based engines.
  • GM 3 bolt cam sprocket (58X), 12586481GM Crank Sprocket 12556582, C5-R Timing Chain, Timing chain dampener 12588670, ARP cam bolts 134-1003.
Check Stock

Texas Speed TSP BFD Chop Monster 6.0L Cathedral Cam LS 5.3, 5.7, 6.0, 6.2, 7.0 Camshaft, Springs, Pushrods and Gasket Kit (Camshaft, Spring Set, Gasket Kit)

  • Texas Speed TSP BFD Chop Monster 6.0L Cathedral Cam LS 6.0, LS2, LQ4, LQ9, L76, L77, LY6, L96, LFA, LZ1.
  • Includes .660" Dual Spring Kit with Integrated One-Piece Seat & Seal, Titanium Retainers, PAC Springs, 7.400" Chromoly Pushrods and Crank Bolt & Gaskets for Water Pump, Timing Cover, & Front Seal..
  • The “BFD” cam is engineered to give your naturally aspirated LS the MOST SAVAGE CHOP humanly possible while delivering big power throughout the curve. 3600+ Stall Recommended. Dual .660" Valve Springs or Better Required.
  • Designed to spec with Chop King - Zac Mertens, the BFD is the nastiest sounding cam you can stuff into your 5.3, 5.7, 6.0, 6.2, LS7, or Big Inch Stroker LS. The BFD is also available for L83..
  • “We designed the BFD for one thing… 10/10 CHOP for LS engines. It just so happens to make a lot of power too. I run the 'BFD Stroker' in my TSP 434 ci powered C10, which I daily drive in LA traffic. It put down 545whp/475wtq through a 4l80e and still manages to get 20mpg on the highway.”.
Check Stock

Michigan Motorsports LS1 Rocker Arms and Bolts with Trunion Kit Installed FITS LS2 LS6 LQ4 LQ9 LM7 4.8 5.3 5.7 6.0

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor..
  • We utilize LS rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure..
  • LS1 style allen head bolts are included for installation. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.
  • This kit includes: 16 LS Series Rocker Arms 16 rocker arm trunnions- LS-type retrofit 32 rocker arm bearin....
Check Stock

COMP Cams 744-16 7 Degree Steel Retainer Set of 16 for 3/8\ Valve w/ 1.437\-1.500\ Spring, Black

  • Maximum Strength - Manufactured from chromemoly steel, COMP Cams' steel retainers are heat-treated and black oxided to ensure high strength and minimal warpage. This ensures long term durability and resistance to deformation..
  • Superior Quality - Instead of using cheap steel, COMP Cams' steel retainers are constructed from high quality chromemoly steel, ensuring high performance and resistance to deformation and cracking..
  • Precision Machined - Manufactured in house using high tech machines, COMP's chromemoly steel retainers are precision machined to ensure optimum load distribution, greater strength and durability..
  • Expansive Fitment Options - Available in 7 and 10 degree lock angles along with 5.5mm, 6mm, 7mm, 8mm, 11/32" and 3/8" valve stem diameters, COMP Cams has a steel retainer for your engine..
  • 7 degree lock angle and is specifically designed for use on our 26915/26918 Beehive springs on GM LS engines.
Check Stock

Sloppy Mechanics Stage 2 Camshaft Choose your kit! 4.8 5.3 5.7 6.0 6.2 LS LS1 LS2 LQ4 LQ9 Elgin 1840-P Camshaft Springs Seals Gaskets and Pushrods

  • Sloppy Mechanics Stage 2 Camshaft 228/230, 585"/.585" 112 LSA Includes: Cam, Springs, Seals, Gaskets and Pushrods.
  • Fits all Gen 3/4 LS 4.8 5.3 5.7 6.0 6.2 including LS1 LS6 LS2 LQ4 LQ9.
  • The Sloppy Stage 2 Camshaft is a cam with a fairly aggressive profile. It will have a nice Lopey Idle and make tons of power all while keeping costs....
  • There is no hiding this cam as will will have a muscle car sounds to it. Everyone will take note of this street warrior. Automatic's will perform best....
  • Elgin Sloppy Stage 2 Camshaft. Camshaft, Springs and Seals: Camshaft with Matching Pac 1219 Springs and Valve Seals. Camshaft, Springs and Seals and....
Check Stock

Brian Tooley BTR Turbo LS Stage 1 Cam, Spring Kit with Titanium Retainers, Chromoly Pushrods and Install Gasket Kit LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2 (Camshaft, Spring Set and Gasket Kit)

  • Brian Tooley Turbo Stage I Cam includes Spring Kit, Pushrods and Install Gasket Kit.
  • Turbo Stage I Cam 222/227 .602"/.598" 113+3 and comes a 3 bolt timing gear pattern..
  • Includes 7.400" LS Chromoly Pushrods, BTR Platinum dual springs, Titanium Retainers, Spring Locators.
  • .505" ID, .060" Thick, LS Valve Seal Kit.
  • Set of 8 Black Intake Seals and 8 Brown Exhaust, LS VALVE LOCKS 7 DEGREE BEAD LOCK SET OF 32.
  • Includes CAM INSTALL GASKET KIT, Front Timing Cover Gasket, Timing Cover Damper, Seal Water Pump Gaskets, LS CRANKSHAFT DAMPER BOLT.
  • When the combination calls for something a little milder, the stage 1 is where to look. It will let a 4.8 turn 7k rpm with a 7675, and it works great in daily driver 6.0's with 68-72mm turbine wheel turbos that don’t see over 6200. A very well-mannered cam with a noticeable idle but nothing too crazy..
Check Stock

COMP Cams 1779-16 7 Degree Tool Steel Retainer Set of 16 for 8mm Valve w/ 26926 Springs

  • FITS: for Chevy Camaro Corvette for LS1 for LS2 for LS3 for LQ4 for LS4 for LS6 for L76 for L92 for L99 for LQ9 for L33 for LSA for LS Cam. NOT fit for LS9 cylinder heads..
Check Stock

Knock & Cam Camshaft Sensor Extension Wiring Harness LS1/LS6 to LS2 LS3

  • Knock & Cam Camshaft Sensor Extension Wiring Harness LS1/LS6 to LS2 LS3.
Check Stock