Reviews Lower Spring Retainer
Huouo Heavy Duty Flagpole Beaded Retainer Rings to Keep Flag Close to Pole - for 7 Inch or 8 Inch Diameter Flag Pole White
- This flag pole rings length from end to end is approx 36 inches, Used for 7" to 8" butt diameter flagpole, Which also can works as flag counterweights, help to aids in lowering flag in halyard systems.
- Flag pole Retainer Ring are made with nylon beads of 1 in. diameter, nylon balls strung onto stainless steel aircraft cable, Each end is looped around a stainless steel ythimble and secured with an aluminum or copper crimp, Complete with stainless steel spring hook quick links to secure the loops together.
- Flagpole Beaded Retainer Ring are used to secure the bottom of the flag as close to the flagpole as possible on Internal Halyard Systems as an aid to raise and lower the flag.
- Reducing tension on the flag grommets, which can help lengthen your flag's life, To hold flag against pole so It doesn't get damaged in high winds.
- Additional retainer ring assemblies are recommended for use with larger flags with multiple grommets, larger Internal & External Halyard flagpoles, flags flown in higher wind areas and when flying multiple flags.
Check StockWright Products V11BL Door Chain, Black
- Wind chain and spring for storm and screen doors.
- Black Spring and Chain Door Retainer Wind Chain and Spring.
- Mounting brackets and screws are included.
- Made with the highest quality and durability.
Check Stock13-piece Air Hammer Set with 5pcs Chisels, Quick Change Retainer and Spring Retainer, 3500BPM Air Chisel Hammer with Rubber Sleeve Handle, Heavy Duty Air Hammer Kit
- ⚙️ 13-piece AIR HAMMER KIT: This air hammer set includes 1pcs long barrel air hammer, 5pcs different types of air hammer chisel bits, 1pcs quick-change chisel retainer, 1pcs spring retainer for backup use, 1pcs hexagonal wrench to tighten or loosen the quick change retainer, 1pcs teflon tape to install the air fitting without leaks, 1pcs 1/4'' NPT air inlet fitting can be connected to your air hose perfectly, 1 pair of hand gloves to absorb the vibration and protect your hands..
- ⚙️ QUICK CHANGE RETAINER: The air hammer kit comes with 2 types of chisel retainers. One is quick change chisel holder, the other is air hammer spring holder. The air hammer quick change retainer is convenient, efficient and safe to change chisel head with built-in strong spring which effectively alleviates vibration. The spring retainer is great for backup use, you can choose either one which you like, both chisel retainers can work perfectly with this pneumatic chisel hammer..
- ⚙️ OUTSTANDING PERFORMANCE: This heavy duty air hammer could rapidly chip, shovel, cut of metal, weld slag, tiles or bricks, the cylinder is made of alloy steel which is strengthened, the piston is heat-treated and more resistant to high temperature.The impact frequency of this air tool is v....
Check StockRexka 50 pcs 1/4 (#14) License Plate Emblem Nameplate Bumper Nut Retainer Grommet Compatible with GM 3907444 Chevrolet Colorado Malibu Silverado GMC Canyon Sierra Buick Cadillac
- Other Names:Step Pad Retainer Nut, License Lamp Nut, License Pocket Nut, License Molding Retainer Nut, Handle, Inside Nut, Door Trim Panel Nut, Molding Nut, Lower Cover Retainer Nut, Emblem Retainer Nut, Cover Nut, Retainer, Nameplate Retainer, Nut.
- White Nylon, 1/4" (#14) Screw Size, 5/8" Head Size, 13/32" Hole Size, Stem Length: 5/16".
- Replaces GM: 3907444, 4755299, Fits Buick: Allure, Century, Electra, LaCrosse, Lesabre, Lucerne, Park Avenue, Rainier, Reatta, Regal, Rendezvous, Riviera, Roadmaster, Skylark, Verano, Cadillac: Allante, Brougham, CTS, Deville, DTS, Eldorado Escalade, Fleetwood, Seville, SRX, XLR.
- Fits Chevrolet: Astro, Avalanche, Beretta, Blazer, C1500, C2500, C3500, Camaro, Caprice, Cavalier, Celebrity, Cobalt, Colorado, Corsica, Corvette, El Camino, Equinox, Express, G10, G20, G30, Impala, K1500, K2500, K3500, Lumina, Malibu, Monte Carlo, S10, Silverado, Suburban, Tahoe, Trailblazer, Venture, Volt.
- GMC: C1500, C2500, C3500, Canyon, Envoy, G1500, G2500, G3500, Jimmy, K1500, K2500, K3500, S15, Safari, Savana, Sierra, Sonoma, Suburban,.
- Fits Hummer: H2, H3, H3T, Oldsmobile: 88 98, Achieva, Alero, Aurora, Bravada, Custom Cruiser, Cutlass, Delta 88, Silhouette, Toronado, Pontiac: 6000, Aztek, Bonneville, Firebird, G5, G6, Grand Am, Grand Pr....
Check StockRexka 10 Sets Engine Splash Shield Screws for Ford - T30 Torx Head Bolts and Grommets for Undertray Engine Fender Liner Deflector Grille for Ford Escape F-150 Edge Focus Fusion C-Max S-Max Lincoln
- Meet or Exceed OEM Specification, Made of High Quality Durable Nylon not Plastic. Usually Used Together In Air Deflectors, Splash and Heat....
- Other Names (Screw) :Emblem Screw, Deflector Screw, Fender Liner Screw, Lower Deflector Screw, Lower Shield Screw, Under Cover Screw, Front Shield....
- Other Names(Nut) :Front Deflector Retainer Nut, Side Shield Nut, Under Cover Nut, Rear Deflector Nut, Deflector Nut, Lower Shield Retainer Nut,....
- Fits the Following Cars: C-Max 2013-2018,Fusion 2013-2018, Escape 2013-2018, F-150 2015-2018, Edge 2015-2018, Escort 1985-1990 1995-2001, Focus....
- 10 pcs of T30 Torx Drive Head Self-Tapping Screw, Black Phosphate, M5 x 20mm.
- 10 pcs of Screw Grommet,Light Green Nylon.
Check StockRetainer Case (2 Pack). Retainer Case with Vent Holes. Perfect Denture case, Mouth Guard Case, Aligner Case, Mouth Guard Case, Retainer Cases (Black)
- Set of 2 Fresh Knight retainer cases so you can keep one at home and the other on the go! Maintain your orthodontic devices safe and protected anywhere you go. No more wrapping your aligner in a yucky napkin or sticking it directly in your back pocket! No more lost retainers!.
- This retainer container is slim and easy to carry everywhere, yet big enough to hold 2 pieces of upper and lower retainers or aligners. It's perfect to hold mouth guards and some dentures too.
- Stink Proof! Vent holes in this retainer holder keep your orthodontic devices fresh and dry while they are stored. The vents help prevent build-up that may cause unwanted smells.
- Dishwasher Safe for quick and easy cleaning. Place in the dishwasher regularly to make sure your retainer cases stay squeaky clean. And since it comes in a 2 pack, you can always use one while the other is in the dishwasher.
- Fresh Knight aligner cases are the best in the industry: easy to open, easy to close, and easy to clean. Made of durable BPA-free materials and made in the USA. Available in every color of the rainbow!.
Check Stock100Pcs Engine Under Cover Push-Type Retainer Clips Engine Splash Shield Fender Liner Trunk Lid Trim with Bonus Fastener Remover Compatible with Toyota Lexus 90467-07201
- 100PCS Push type retainer Clips + 1pcs Fastener Remover. Quality black nylon material, Head Diameter: 20mm, Stem Length: 10mm, Fits Into 7mm Hole.
- Compatible with Lexus Toyota 90467-07201.
- Under Cover Retainer, Lower Extension Clip, Engine Under Cover Push-Type Retainer, Rear Duct Clip, Wheelhouse Liner Clip, Trunk Side Trim Clip, Side....
- Compatible with Toyota: 4Runner, Avalon, Camry, Corolla, Corolla iM, Highlander, Matrix, RAV4, Sequoia, Solara, Tacoma, Tundra, Venza.
- Compatible with Lexus: CT200h, ES300, ES330, ES350, GS F, GS Turbo, GS200t, GS300, GS350, GX460, HS250h, IS F, IS200t, IS250, IS300, IS350, LS460,....
Check StockSwarovski Crystal Symbolic Multi-Colored Hoop Circle Earrings, Rose Gold-Tone
- Deep Cleaning - Over 45000Hz freqency, 360 degree full-around cleaning eyeglass cleaner. Ultrasonic cleaner solution, retainer cleaner coming with matching basket for cosmetic brush, makeup brush, rings, ear rings, watch, bracelet, necklace, glasses, coins, keys and things that won't clean easily by normal way..
- Larger than larger - Top SUS 304 tank with 500mL high capacity, sonic jewelry cleaner brings you more room to clean at one time, keep your rings and jewelry crisp and sparkly every day..
- Redesign for lower noise - Using anti noise pad inside to keep sounds lower, also redesign the interior structure to avoid noise and heat makes silver jewelry cleaner is longtime using without broken. Also sterling silver cleaner could highly reduce the noise that not making you fidget..
- Auto Timer with Overheat Protection - 3min auto setting timer, no worry to wait until it's done, safety is our #1 piority. With high capacity and matching basket, you can clean as much as you want at a same time..
- Gifts for family and yourself - Used for all kinds of denture, retainer, aligner, mo....
Check StockPro-line Racing 1/10 Powerstroke Rear Shocks: Short Course, PRO606301
- Pair with the PRO606302 PowerStroke Front Shocks.
- Injection molded, super durable spring retainer and shock ends.
Check StockRetainer Case (2 Pack). Retainer Case with Vent Holes. Perfect Denture case, Mouth Guard Case, Aligner Case, Mouth Guard Case, Retainer Cases- Fresh Knight (True Red)
- Set of 2 Fresh Knight retainer cases so you can keep one at home and the other on the go! Maintain your orthodontic devices safe and protected anywhere you go. No more wrapping your aligner in a yucky napkin or sticking it directly in your back pocket! No more lost retainers!.
- This retainer container is slim and easy to carry everywhere, yet big enough to hold 2 pieces of upper and lower retainers or aligners. It's perfect to hold mouth guards and some dentures too.
- Stink Proof! Vent holes in this retainer holder keep your orthodontic devices fresh and dry while they are stored. The vents help prevent build-up that may cause unwanted smells.
- Dishwasher Safe for quick and easy cleaning. Place in the dishwasher regularly to make sure your retainer cases stay squeaky clean. And since it comes in a 2 pack, you can always use one while the other is in the dishwasher.
- Fresh Knight aligner cases are the best in the industry: easy to open, easy to close, and easy to clean. Made of durable BPA-free materials and made in the USA. Available in every color of the rainbow!.
Check Stock