Reviews Low pass Filter

3000W Class D Smart Amplifier 1-2 Ohm Monoblock Pro Car Audio Taramps SMART3

  • Class D MOSFET Mono Block Power Amplifier.
  • RMS Power at 1 Ohm:1500 Watts，RMS Power at 2 Ohms: 800 Watts，RMS Power at 4 Ohms: 510 Watts.
  • Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • Remote Subwoofer Level Control Included.Variable Bass Boost - Variable Bass Boost 0 to 12dB(50Hz) allows you to adjust the low bass within the boost range to just the way you like it..
  • Warranty -TopstrongGear provides a powerful 2 year Platinum Online Dealer Warranty.
Check Stock

Presonus Temblor T10 Powered Studio Subwoofer, Multicolor

  • 10-Inch glass-composite low-frequency transducer.
  • power: 100-120V 50/60 Hz or 220-240V 50/60 Hz.
  • Input gain control (-30 dB to +6 dB, continuously variable) and continuously variable low Pass filter (50 Hz to 140 Hz).
  • Switchable high pass filter removes frequency content below 80 Hz from the full-range signal sent to the main monitors.
  • Momentary footswitch (included) Bypasses the subwoofer, high pass filter, and sub out.
  • Left and right, balanced XLR and ¼” TRS and unbalanced RCA main inputs.
Check Stock

ART 351 EQ 31-Band 1/3 Octave Graphic Equalizer

  • The 351 is a single-channel, 31-band, 1/3-octave graphic equalizer with many features: constant Q circuitry with a 3% center frequency accuracy, 20mm center detent sliders, selectable boost/cut range of 6dB or 12dB, active balanced and unbalanced input and output connections, adjustable high-pass filter, adjustable low-pass filter, variable input level control, clip level indicators, ground lift switch, internal power supply, and selectable line voltage switch.
  • The ART 351 Single Channel 31-Band Equalizer features a rugged all-steel chassis that occupies a single 19" rackspace.
Check Stock

TOPSTRONGGEAR 1 Ohm 800 Watts Class D Full Range Mono Block Amplifier, 1/2/4 Ohm Stable, Remote Subwoofer Control

  • Class D MOSFET Mono Block Power Amplifier.
  • RMS Power at 1 Ohm:1500 Watts，RMS Power at 2 Ohms: 800 Watts，RMS Power at 4 Ohms: 510 Watts.
  • Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • Remote Subwoofer Level Control Included.Variable Bass Boost - Variable Bass Boost 0 to 12dB(50Hz) allows you to adjust the low bass within the boost range to just the way you like it..
  • Warranty -TopstrongGear provides a powerful 1 year Platinum Online Dealer Warranty.
Check Stock

TOPSTRONGGEAR 1 Ohm 1500 Watts Class D Full Range Mono Block Amplifier 1/2/4 Ohm Stable Remote Subwoofer Control Subwoofer Amplifiers

  • Class D MOSFET Mono Block Power Amplifier.
  • Max Power at 1 Ohm:1500 Watts，Max Power at 2 Ohms: 800 Watts，Max Power at 4 Ohms: 510 Watts.
  • Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • Remote Subwoofer Level Control Included.Variable Bass Boost - Variable Bass Boost 0 to 12dB(50Hz) allows you to adjust the low bass within the boost range to just the way you like it..
  • Warranty -TopstrongGear provides a powerful 1 year Platinum Online Dealer Warranty.
Check Stock

Sound Storm EV5000D Car Amplifier – 5000 Watts Max Power 1 Ohm Stable Class D Monoblock MOSFET Power Supply Remote Subwoofer Control

  • POWER: Maximum Power Output of 5000 Watts at 1 Ohms into one channel. Maximum Power output of 2500 Watts at 2 Ohms into one Channel. This amplifier is....
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. This input will be used to connect the EV5000D to your factory....
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the EV5000D with the source....
  • LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. A low-pass filter will....
  • VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

Planet Audio AC1500.1M Monoblock Car Amplifier - 1500 Watts Max Power 2/4 Ohm Stable Class A/B Mosfet Power Supply Remote Subwoofer Control

  • power: max power output of 1500 watts at 2 ohms into one channel. maximum power output of 750 watts at 4 ohms into one channel. this amplifier is....
  • high level inputs: speaker level inputs are commonly referred to as high-level inputs. this input will be used to connect the ac1500.1m to your....
  • low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source....
  • low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. a low-pass filter will....
  • variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

NVX QBUS8P 300W Peak (150W RMS) Amplified and Loaded 8' Ported Under Seat Quick Bass Universal Subwoofer System with Remote Bass Knob

  • Space Saver - The combination of a built-in 300W amplifier that powers the 8” subwoofer makes this ideal for spatially challenged vehicles..
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the low-pass filter to primarily keep high notes out of your subwoofer. Adjust it from 50-150 Hz to best fit your system..
  • Ease of installation - Takes either speaker wire (High-level) or RCA cable (low-level) inputs. This makes connecting the QBUS8P to your radio easier since it's compatible with both factory AND aftermarket units!.
  • Automatic Turn-On - This circuit automatically turns the QBUS8P on whenever it senses an audio signal. This eliminates the need to run a remote turn on wire making installation a breeze..
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it..
Check Stock

Rockville RBG18S 18' 2000W Active Powered PA Subwoofer W/Dsp+Limiter Pro/DJ

  • Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs – 15.5” x 11” x 3”. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. Weight: 13 lbs..
Check Stock

Sound Storm Laboratories LOPRO10 10 Inch Powered Under Seat Car Audio Subwoofer - 1200 Watts Max Built-in Amplifier Low Profile Remote Subwoofer Control for Truck Boxes and Enclosures

  • Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock