Reviews Low noise Signal Isolators

MuHize Black D-Ring Shackle Cover 2 Pcs Shackle Isolator and 4 Pcs Washer, Isolators Washers Kit Fits 3/4 inch Shackle Gear Design Rattling Protection (Pack of 2)

  • PACKAGE INCLUDED - MuHize 2Pcs black D-ring shackle isolators + 4 Pcs black washers kit. Perfect fit for standard 0.75" or 3/4" D-Rings or Shackles with 7/8" screw pin..
  • EASIEST DIY FOR BUMPER - The shackle isolators and washers are one of the DIY necessities of the off-road trail or everyday driving. The quality shackle isolators can both protect Wrangler or pickup bumper finishes from damage and make it look cool after DIY modification..
  • EASY TO INSTALL - No Screws or drilling are required. And the washers can reduce rattling noise when the vehicle is in motion..
  • DURABLE MATERIAL - MuHize isolator & washers are specific for durable rubber material, which can prevent shackles from crack, warp or corrode effectively..
  • HIGH QUALITY - Perfect bending can be matched with 3/4 inch D-ring shackle. Accurate design. It can be used as a buffer to effectively protect the bumper..
Check Stock

LANTRO JS RF WideBand Amplifier 433MHz 22dB High Gain Low Noise LNA Amplifier

  • 【Product Parameters】- Working Voltage: 3---5V.
  • Protect-----This strong heavy duty tool bag can protect your tools from water and dust.
  • 【Scope of Application】- The product can be applied to various RF receiving front ends, used for shortwave, FM broadcasting, remote control receivers, cable TV signal amplifiers and other RF signal amplifications that require low noise.
  • 【Excellent Performance】-The radio frequency amplifier is made of high-quality electronic components and has the advantages of high gain, low noise figure, etc.
  • 【Low Noise】- The noise factor is as low and 0.55dB, which is quite small.
Check Stock

Microphone Preamp, LiNKFOR Dynamic Microphone Amplifier, 28dB Gain Range Microphone Preamp for Livestream, Broadcast, Podcast, Vocal Recordings

  • ... low sensitivity. (Note: It is dedicated to dynamic microphones. NOT suitable for condenser microphones that require phantom power.).
  • 【Low Noise and Low Impedance] 】 With a strong load capacity, the cloundlifter can effectively suppress radio frequency interference and noise. Even in the process of long-distance signal transmission, there will be ideal sound quality performance..
  • 【Excellent Sound Quality】The amp can provide +28dB of pure and clean gain without sound coloration, which is equivalent to a direct increase of 28dB for the sound card mic preamp with almost no sound quality loss, but can reduce the sound card itself because the gain is too large resulting noise problems..
  • 【Rugged and Durable】Solid all-metal exterior design, durable sealed internal structure effectively eliminates most electrical interference and noise, high-quality surface and gold-plated XLR connectors for reliable signal connection, slim design makes it easy to set it up at room or stage..
  • 【Plug & Play】Easy to use, lightweight and portable. It is recommended to directly insert it into the microphone output interface for use, and a cable can be used between the microphone and the product if necessary, but note that the length of the cable determines the signal ....
Check Stock

EC Buying AD620 High Accuracy Low Power Programmable Instrumentation Amplifier Module Voltage Amplifier Module Differential Amplifier Single-Ended/Differential Small Signal/Small Amplifiers Module

  • ...tems such as electronic scales and sensor interfaces. Also features low noise, low input bias current, and low power consumption. The module has a fixed voltage output..
  • ♥Basic Features: ✭Module Name AD620 Instrument Programmable Amplifier ✭Module size:50mm * 50mm ✭Module power supply: 5V-24V ✭Module input signal type: single-ended signal or differential signal ✭Module signal input and output range: the input signal range is within 100 microvolts of the power supply, and the output signal range is within the power supply ✭Module bandwidth: AD620: 120KHz (G=100), AD623: 800KHz (G=1), AD620/623 is lower than 50KHz at high gain, and higher than 1MHz at low gain.
  • ♥ Other Features: ✭Module gain: When there is no solder slip, the AD620 will zoom by 10 times by default, and the AD623 will zoom by 20 times by default. During welding slip, AD620: G=1+50K/Rg, AD623: G=1+100K/Rg ✭Maximum magnification of the module: more than 2000 times (actual measurement), due to the large gain of the waveform frequency band, it is recommended to use multi-stage amplification with high gain ✭Fixed output voltage: 5V-10V (default delivery 5V).
  • ♥ Other parameters: ✭Common mode rejection ratio: AD620: 100dB (minimum, G=10).
Check Stock

6 Inch Guitar Patch Cable Black Guitar Effect Pedal Noiseless Cables

  • 6 inch short guitar cable with 1/4 inch right angle plugs (common type), perfect for keeping your pedal board organized and clean Shielding provides noise rejection for quiet operation, ultra low capacitance which lends to a pure signal transparency.
  • Shielding provides noise rejection for quiet operation, ultra low capacitance which lends to a pure signal transparency..
  • Two big core audio plug, In=Out Technology, molded TS 1/4″ Plugs are perfect for pedal boards..
  • Standard audio connector, solid outside casting, utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone..
  • Used for audio signal transmission of microphone, amplifier, mixing console and other equipment..
Check Stock

Hifonics A3000.1D ALPHA Compact 3000 Watt 1 Ohm Stable Monoblack Car Audio Amplifier

  • Low Noise Preamplifier Circuitry - Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process..
  • RCA Inputs - XXX style RCA connectors for audiophile signal quality and maximum signal throughput with minimum distortion and maximum external noise rejection..
  • Crossover Type - Accu-Cross crossovers allow for complete control of the signal directing to all speakers. See specifications section for specific frequencies.
  • Electronic Equalizer - Control of amplifier output with on board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier..
  • Bass Remote Included - Wired Bass Remote allows adjustments to bass frequencies from the control which can be mounted anywhere in the vehicle. Smooth potentiometer and ringed illumination in a satin black mount create a custom look..
Check Stock

Topping HS01 USB 2.0 High Speed Audio Isolator Compatible with PCM32bit 768kHz DSD512 withstands up to 1kVRMS

  • Leading innovation - Previous isolators were limited to Full Speed (12 MBit/s) and Low Speed (1.5 MBit/s) transmission. This product is capable of....
  • USB2.0 High Speed - HS01 supports USB2.0 High Speed transmission, which is compatible with high-resolution audio transmission such as PCM32bit/768kHz....
  • Low latency - The latency is only 0.29us, which fully meets hifi and professional applications' needs. Note: Generally, the latency of USB device is....
  • Galvanic Isolation - This product is an ideal solution to break ground loops, avoid noise coupling and protect ports from power surges and voltage....
  • Precautions - When the device connected to HS01 exceeds the current output capability, an external auxiliary power supply can be used. Please note....
Check Stock

KickBlock - World’s Best Bass Drum Anchor System (Brick Red)

  • Frequency response shaped specifically for kick drums and bass instruments.
  • Built-in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum.
  • Studio quality performance, even a high sound pressure levels.
  • Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise.
  • Hardened steel mesh grille that resists wear and abuse.
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration.
  • Neodymium magnet for high signal–to–noise ratio output.
  • Low sensitivity to varying load impedance.
  • Drum microphone provides low-frequency bass punch and SPL handling. It includes dynamic locking stand adapter for easy set-up, steel mesh grille for durability, shock mount for sound isolation, and neodymium magnet for high signal-to-noise ratio..
Check Stock

Rega Aria V2 Flagship MM/MC FET Phono Preamplifier

  • ...dicated moving coil and one moving magnet. Each stage is designed and engineered to maximise the potential of your vinyl system whilst remaining easy to use and set up..
  • The Aria is an "all analogue amplifier" with no digital control circuitry. The fully aluminium case screens the internal circuit from any stray RFI signals. Our designers have avoided including any superfluous gadgets as they obstruct the signal path and degrade the sound quality. The Aria incorporates many innovative design ideas including a self-adjusting servo control to keep the MC input circuit at its optimum, compensating for any variations in ambient or operating temperature..
  • Both stages have their own separate input sockets and input pre-amplifier circuitry. This enabled us to design bespoke input circuitry for each cartridge type without compromise. Signal switching is performed at high level and low impedance (via relays) ensuring there is no degradation of the signal..
  • The MC input uses parallel connected, low noise FET's (Field Effect Transistor's) configured as a compound pair. The use of FET transistors ensures there is no bias current flowing in the cartridge coil so as not to upset the delicate magnetic geometry of the cartridge. The MC input has the provision for selec....
Check Stock

Antenna Radio Amplifier, Easy Assemble Copper Signal Wire Universal 12V Car FM Radio Aerial Antenna Signal Reception Amplifier Booster, Black

  • Main Function : This aerial signal booster is designed to improve your signal strength and radio reception in weak areas..
  • Safe to Operate : The amplifier circuit with voltage conversion design can be directly connected to 12v power supply. Provide high output current, low harmonic distortion and cross, ensure security operation..
  • Strong Anti-Interference and Better Signal : It adopts copper signal wire, which can providing strong anti-interference and better signal, increasing the reception distance and enhancing sensitivity of weak signals..
  • Effectively Reduce the Noise : In the meantime of signal reception, it can effectively reduce the noise, so that you can receipt the signal to the better extent..
  • Convenient to Assemble : Easy to install, saving cost and space. Thickening horse mouth metal shielding cover, providing all-round protection..
Check Stock