Reviews Low carbon Steel U bolt

REXBETI Staple Gun, Manual Brad Nailer Power Adjustment Heavy Duty 3 in 1 Staple Gun with 2600-Piece Staples for Upholstery, Fixing Material, Decoration, Carpentry, Furniture

Before use, make sure the strength adjustment bolt was already be tightened. If it came loose, be sure to tighten the bolt, or the loose bolt may pop out..
Comes with 1000pcs D-type, 800pcs U-type and 800pcs T-type staples to meet your different needs.
Rubber grip and convenience handle lock for comfort and safe.
When the staple gun is stuck, just pull down the metal drive channel and remove the stuck nails to ensure the nail gun works again.
Thick carbon steel construction for durability, multi-purpose allows easily insertion of D-type, U-type, T-type staples.Easy operation.

Check Stock

REXBETI Staple Gun Manual Brad Nailer Power Heavy Duty 3 in 1 Staple Gun with 2600-Piece Staples for Upholstery Fixing Material Decoration Carpentry Furniture Staple Gun+Case+Remover

Before use, make sure the strength adjustment bolt was already be tightened. If it came loose, be sure to tighten the bolt, or the loose bolt may pop out..
Comes with 1000pcs D-type, 800pcs U-type and 800pcs T-type staples to meet your different needs.
Rubber grip and convenience handle lock for comfort and safe.
When the staple gun is stuck, just pull down the metal drive channel and remove the stuck nails to ensure the nail gun works again.
Thick carbon steel construction for durability, multi-purpose allows easily insertion of D-type, U-type, T-type staples.Easy operation.

Check Stock

Tolsen Bolt Cutters Heavy Duty, 36-Inch Bolt Cutter for Padlocks, Lock Cutter Heavy Duty Chain, Rods, Rivets, Locks and Wire Cutter - Ergonomic Non-Slip Handle Bolt Cutter - 36 Bolt Cutter

[HARD STEEL JAWS] This heavy-duty bolt cutter is made of strong, drop-forged hardened steel jaws for long-lasting blade life and has an adjustable bolt mechanism for proper blade alignment..
[CUTS THICK STEEL] Designed and manufactured for maximum durable blade life. The bolt cutter strong jaws can cut 3/8-inch low-carbon steel and 5/16-inch medium-carbon steel in industrial jobs. Great for cuts bolts, chain, threaded rod, cable wire and more.
[CENTER CUT DESIGN] Centered blades with slightly rounded cutting edges that are beveled on both sides to cut with precision. The jaws are adjustable and replaceable. Cut through soft, medium and hard metals with confidence using these bolt cutters..
[ERGONOMIC GRIPS] Our bolt cutter features ergonomic handles and comfortable nonslip rubber grips fit down over steel handles for enhanced strength and comfortable controlled cutting of metals..
[100% SATISFACTION GUARANTEE] You are protected with our 100% No Questions Asked Guarantee for either a replacement or refund. We love Our customers that’s why we care about only putting out high quality products that satisfies your needs.

Check Stock

Leaf Spring Axle Extended U-Bolts (Square Bend) Compatible with Ford 1999-2004 F250 F350 Super Duty Excursion 4WD 4x4-12 inch Length - 3.15 inch Width - F-250 F-350 - Black

...ts ensure proper thread engagement when securing your lift pack and leaf springs to your vehicle. Designed to be solid so that it does not bend or warp under stress, and as long as they are properly installed should last the lifetime of your vehicle..
[MATERIAL & MANUFACTURING] The U-Bolts are made from Heat Treated Carbon Steel for optimal durability and fitment. All parts (including the Nuts and Washers) are hardware grade 10.9. Zinc plating / coating prevents surface corrosion and rust..
[INSTALLATION] These square ubolts do not come with instructions but is completely bolt-on. Please consult a professional if you need support. Should take 1-2 hours to install. Make sure nuts are tightened evenly (refer to diagram for sequence) and that they are torqued to correct manufacturer specifications. The use of loctite is recommended to protect the threads from rust / corrosion and prevent loosening from vibrations..

Check Stock

Prime-Line 9071931 U-Bolts, Round Bend, 1/4 inch-20 X 1-1/8 inch X 2-1/4 inch - (3/4 inch Pipe), Zinc Plated Steel, (10-pack)

STOP: ONLY USE a Hand Socket Ratchet or wrench to run the nuts up and tighten..
DO NOT USE an impact or powered socket driver. Ignoring this instruction will cause U-Bolt Galling / Seizing / Breaking / Failure / Expletives / Sawzall. Let's keep it Fun, and Successful..
U-Bolt Size: 1/2" Diam x 3- 1/16" Inside Width x 5- 5/16" Inside Height (Length).
Attention: When measuring for Your needed Height (Length), add 1" for the nut and washer..
Threading: 1/2"-13 with a thread length of 2- 1/2"..
U-Bolts and hardware are made out of 304 Stainless Steel..
These U-Bolts will fit on 3" x 3" cross members, such as 3" x 3" box steel..

Check Stock

PSCCO 12PCS U-Shaped Steel Tapped Hole Clip On Nut Including Screws

Corrosion resistant metal. However, over time, all metals tend to corrode. However, the properties of this metal are better than those of soft low-carbon alloys such as carbon steel..
U-shaped Steel Tapped Hole Clip Size: 25*14*5mm.
Just clamp it on the panel and fix it with the screws provided..
Clips are galvanized and screws are powder coated..

Check Stock

HYS VHF Marine Antenna Low-Profile 156-163Mhz Antennas W/16.4ft(5m) RG58 Low Loss Premium Coaxial Cable with PL259

Marine Antenna VHF 156-163MHz, 2 dBi signal with up to 50W of power.
W/16.4ft(5m) RG58 Low Loss Premium Coaxial Cable With PL259.
VHF Rubber Antenna Designed for any 156-163MHz device for receivers, 156-163MHz antenna for 156-163MHz device receivers to improve signal in receiving and transmitting..
Stainless Steel L-bracket&U-bolts, it comes with U-bolts which can be used with the attached plate for pole mounting..
The antenna does not come with mast pole mount.
it comes with TWO U-bolt which can be used with the attached plate for pole mounting..
Comes with mount and screws, easy to carry and install, the body of the VHF Marine Antenna makes it highly resilient to your Boat, Yacht etc use..
HYS VHF Marine Antenna made of high quality rubber with cable and clip, it will help you get longer communication range..

Check Stock

10Pcs U Bolts in Steel 2 x3½ x5 U Pipe Clamps Heavy Duty Mounting Hardware with Washers and Nuts

Carbon steel Q235B, surface electro-galvanized, anti-corrosion, anti-rust.
The inside diameter of the U is nominally 3½" .The threads are 2" in length..
Product size: 5"×5⅛"×1"(128×130×25mm), Thickness :3 mm, diameter : φ7mm.
U pipe clamps used to fix or connect the locked parts to pipes, wood, etc. Suitable for boats, plumbing, and other home and industrial applications..
Package Content: 10xU-Bolt, 20xWashers, 20x Nuts, 10x Frame.

Check Stock

Aopin Round U-Bolts 1-1/2 inch 38mm M6 Inner Width 304 Stainless Steel 8pcs Self-Locking Nylon Insert Hex Nuts Flat Washers for Car/Motorhome/Sailing Trailer Replacement Part and Accessorie 4Pack

STOP: ONLY USE a Hand Socket Ratchet or wrench to run the nuts up and tighten..
DO NOT USE an impact or powered socket driver. Ignoring this instruction will cause U-Bolt Galling / Seizing / Breaking / Failure / Expletives / Sawzall. Let's keep it Fun, and Successful..
U-Bolt Size: 1/2" Diam x 3- 1/16" Inside Width x 4- 5/16" Inside Height (Length).
Attention: When measuring for Your needed Height (Length), add 1" for the nut and washer..
Threading: 1/2"-13 with a thread length of 2- 1/2"..
U-Bolts and hardware are made out of 304 Stainless Steel..
These U-Bolts will fit on 3" x 3" cross members, such as 3" x 3" box steel..

Check Stock

Kolpin Stronghold Autolatch

Auto-latching design provides quick secure attachment of any Kolpin Stronghold products.
Engineered steel bracket for precision angling and attachment to vehicles.
Spring loaded latch with stainless steel spring.
Durable glass-reinforced nylon auto-latch construction.
Includes u-bolts and universal mounting hardware. Included Mounting Hardware: (8) Nylon Lock Nuts, M6-1.0, (8) Flat Washer, M6, (4) U-Bolt, M6-1.0 x 25mm ID x 45mm, (4) Flange Hex Bolt, M6-1.0 x 35mm LG, (1) Mounting Bracket.

Check Stock