Reviews Low Profile Tool Holder

1Zero Rock Solid Cup Holder Phone Mount for Car Low Profile No Shaking Long Arm 2in1 Air Vent Car Phone Mount Compatible with All iPhone Samsung Cell Phones for Truck SUV Tesla Golf Cart Boat

  • [Rock Solid Cup Holder Phone Mount] Thanks to a heavy-duty low profile cup holder base, and all three expandable claws have a thick anti-slip rubber pad, straight rod design ensures your cell phone is always at the most stable place of a regular pyramid structure, it will keep your cell phone stable on all road condition even on the bumpiest road. No more shaking, no more wobbling as the gooseneck cup phone holder. With a three-sided triangle hold, it will hold even a big cell phone in place..
  • [Low Profile Adjustable Car Cup Phone Holder] 1Zero cup phone holder has a 1-inch thick arm, with a precise gear loading mechanism, that allows you to adjust the height of the car phone mount in 1 second, just simply pull or push to have an optimal operation point. Solid thick arm, no breaks, no shakes..
  • [No Blind Spot] With a 17mm big ball joint that allows you rotate your cell phone in 360 degrees for either portrait or landscape view, also allows you to swivel the device upward or downward in 90 degrees. A 360° rotatable gear loading neck allows you to switch the phone holder for the passengers easily and quickly..
Check Stock

NEIKO 02449A Hex Bit Holder Rack with Strong Magnetic Base | 37 Hole Bit Storage | 1/4 Inch Hex Bit & Drive Bit Adapter Storage | Screwdriver Bit Organizer | Toolbox Organizer | Driver Bit with Magnet

  • MAGNETIC BASE: A strong magnetic base with rubber coating that attaches to metal surfaces like your tool box, tool chest, tool cart or car without leaving scratches or marks. Storing your hex bits while allowing efficient workflow operation..
  • SECURE STORAGE: Each bit hole is designed with magnetized components to keep you quarter inch bits secured and safe within the organizer to prevent them getting lost. Even when flipped upside down this magnetic tool holder will not drop your bits..
  • OPEN TOP: This hex bit organizer allows easy to access quick bit changes for alternating, removing, or replacing pieces when using a power drill or screw gun. This magnetic screwdriver bit holder keeps all your Phillips, slotted, flathead, or torx bits in one place..
  • LOW PROFILE: Measuring only 1-1/4" x 7" x 13/16 inches this slim and sleek design allows this small bit organizer to be a perfect fit in any toolbox for portability and easy identification for all your loose bits. No more hard to find loose bits in your tool bag..
  • DURABLE: This open bit case is constructed of high quality, heavy duty, and impact resistant polypropylene plastic for a long lasting life in your workshop or garage. Powerful ferrite magnet base coated in a rubber base..
Check Stock

3 Types 12V Add-a-Circuit Adapter & Fuse Kit - Muhize Fuse Tap Fuse Holder with Standard Mini and Low Profile TAP Blade Fuse for Cars Trucks Boats (9 Pack)

  • PACKAGE INCLUDE - MuHize 3x Low profile mini fuse adapter with 5 Amp low profile mini blade fuses.
  • MuHize 3x Mini fuse adapter with 15 Amp mini blade fuses.
  • MuHize 3x Standard fuse adapter with 5 Amp standard blade fuses..
  • DUAL-SLOT FUSE HOLDER - It provides one fuse holder to protect original circuit and provides a lead with the second fuse holder for new circuit..
  • EASY TO USE - Plug into an existing fuse holder. Easy to install the additional circuits without splicing or cutting..
  • WIDELY APPLICATION - MuHize assorted add a circuit Fuse Tap Adapter kit commonly fits for blade fuses (rating 2Amp-40Amp). 3 Types: Low profile mini fuse adapter fits for Korean Cars.
  • Mini fuse adapter fits for Japan and US Cars.
  • Standard fuse adapter fits for European Cars. Perfect for car alarm, cell phone charger, GPS, DVD player, dash cam, etc.
  • HIGH QUALITY - 100% brand new & made from excellent materials, good electrical conductivity, and melting resistance..
Check Stock

Wera 056490 Tool-Check Plus Bit Ratchet Set with Sockets - Metric

  • High quality low profile 1/4" x 3.5" oal. Ratchet is extremely strong capable of 48 ft. lbs. but has a return angle of 6°. With a bit installed....
  • 1/4" Ergonomic screwdriver x 3" oal. Has strong permanent magnet to securely hold and magnetize insert bits . Kit comes complete with 28 high quality....
  • Rapidaptor 1/4" magnetic bit holder can hold insert or power bits. Can quickly be chucked into a cordless tool. Rapidaptor holds bits secure but....
Check Stock

Lisle 37140 Disconnect Pliers, 45 Degree

  • The Low Profile Design with 45° Bend Disconnects Fuel Line, EVAP Line Fittings and DEF Fittings in Hard-to-Reach Areas.
  • Low-profile design with 45° bend allows the tool to fit between the top of the fuel tank and vehicle.
Check Stock

STREBITO Right Angle Screwdriver 32-Piece 1/4 Inch Mini Ratchet Set Low Profile Offset Screwdriver Bit Set with 72-Tooth Ratcheting Wrench Stubby Ratchet 90 Degree Screwdriver for Small Spaces

  • 【Mini Size for Tight Spaces】STREBITO angle screwdriver set includes a low profile stubby ratchet which is only 3.66″ length, compact fit in your palm, make it a great troubleshooter and timesaver when work in tight spots. The precision 72-tooth reversible ratcheting mechanism produces a minimal sweep of 5 degrees while give more torque than short stubby screwdriver – perfect for tight, confined, close quarters, and hard to reach spaces.
  • 【Mechanical Design for Easy Use】The small ratchet set has been professional design to maximize your repair capabilities. Teardrop, low profile head offers better access, while a finger touch flip switch lets you change directions(clockwise/counter clockwise) with ease. The 1/4″ bit extension can extend your access to hard-to-reach places. And the bit holder has a magnet to prevent bit from dropping when replacing and supports smooth bit exchange.
  • 【Variety Bits for Common Application】This 32 Piece angled screwdriver kit offers a wide variety of 1/4″ bits for any user need – from standard phillips, flat head, square, pozidriv, to special security torx, tamper resistant hex, spanner and spline. Whether you’re experienced or just starting out, this micro ratchet set is a very professional a....
Check Stock

ATLIN Strut Spreader Tool – Strut Socket for Audi, VW, BMW, Mini, Ford

  • Compatibility – The ATLIN strut spreader is designed to fit any vehicle equipped with a pinch bolt style hub which is commonly found on Volkswagen, Audi, BMW, MINI, Ford vehicles. Some compatible models include the 2005+ VW Golf GTI, Jetta, and Passat.
  • Superior Design – Audi and VW spindle housings may require a significant torque to spread apart. Unlike other brands, the ATLIN strut removal tool features an oval shaped head. This design makes it easier to rotate the strut tool in the strut channel.
  • Low Profile – Most strut socket tools are difficult to use due to their length. The ATLIN strut spreader tool was designed to be as low profile as possible, allowing it to fit in tight spaces, thus making your job much easier.
  • High Quality – Crafted from hardened S2 tool steel, a material used in premium tools and known for its extreme toughness, this spreader socket will not yield under high torque applications.
  • Size & Materials – 1/2” drive, pry bit measures 5.5x8.2mm, S2 tool steel, chrome vanadium (CR-V).
Check Stock

DEWALT Angle Grinder, 7-Inch, 8,500 RPM, 4.0-HP (DWE4517) , Yellow

  • High power 4 HP (maximum motor HP) 8,500 rpm motor of the angle grinder with overload protection provides higher operating speeds under load.
  • Epoxy coated field and armature of the metal grinder provide long service life against abrasion from airborne debris.
  • DEWALT angle grinder comes with a low-profile gearcase allowing for work in tight areas.
  • Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage.
  • 2-position side handle provides improved ergonomics for specific applications.
  • 8,500 rpm provides optimal material removal with 7-inch grinding wheels.
  • Brush window allows for quick brush replacement.
  • High power 4 HP (maximum motor HP) 8,500 rpm motor.
  • Low profile gear case allows for work in tight areas.
  • Automatic turn-off brushes shut down the tool when brushes need to be changed.
Check Stock

Creality Rotatable Filament Spool Holder Upgrade Kit Built-in Bearing 3D Printer Bracket for Ender 3 V2 Ender 3 Pro CR10 Ender 5 Pro Series 3D Printers

  • 【Application】: The filament spool holder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,CR10 ,Ender 5 Pro and more 3D printers..
  • 【Rotatable Bearing】: Independent rotating shaft design for low rotation resistance, good rolling stability,less barrel wear and stable filament feeding..
  • 【Durable Material】: This 3D printer spool holder is made of high strength ABS and PC material, which is durable and exquisite..
  • 【Easy Installation】: The filament holder only needs to be fixed with screws, which perfectly matches with 3D base profile..
  • 【Multiple Installation Ways】: The Rotate Spool bracket can be installed on the top profile or base profile of the 3D printer..
Check Stock

Nelahol Flip Up Sights Iron Sights Low Profile A2 Front Sight + Backup Rear Sight Compatible Sights

  • Two Mode – Both Precision and CQB Apertures on Rear Sight to Switch.
  • Durable to Use – Aluminum Alloy Low Profile Iron Sights Black Matte Anodized Finished in 21.4mm Picatinny Weaver Rail Works Sturdy Durable.
  • Adjustable Aiming – Adjust Windage with Windage Screw on Rear Sight . Adjust Elevation on Front Sight by Tool(ELEVATION ADJUSTING TOOL DO NOT INCLUDED).
  • Flip Up – Flip Up Sights with Pressing Upgraded Spring Load Button.
  • Compatible – Co-Witness with Other Standard Optics When Iron Sights Flipped Up Low Profile.Out of The Way When Fold Down with Pressing Button.
Check Stock