Reviews Low Pressure Inline Fuel Pump

Electric Fuel Pump 12V Universal Low Pressure 12 Volt Transfer Inline Fuel Pump for Lawn Mower Carburetor Gas Diesel Engine 2.5-4psi HEP-02A

  • 【Specification】Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch )..
  • 【Compatibilty with】Electric Fuel Pump 12v Universal, fits for Trucks, Carburetor, ATV, Marine, Motor, UTV, All 12 Volt Cars, Boats, Generators, Lawn Mower.
  • 【Performance】Low Pressure Fuel Pump, build-in check valve design to prevent back flow, light-weight and small size, plunger-type fuel supply, suction stronger, more stable oil supply, 12 Volt Fuel Pump, two-wire design, can be used as booster, standby unit or as a completely independent fuel pump installation and mounted anywhere..
  • 【Easy to install】Light weight, quite operation, easy to fit and connect: 2 bolt fixing, 2 wires design..
  • 【Note】If you have any questions about our fuel pump, please contact us for a satisfactory solutions..
Check Stock

NOENOUGH External Fuel Pump 300LPH High Flow 12V 145psi Fuel Injection Pump Replacement 0580254044 Universal Fit for AN10 Inlet / AN6 Outlet

  • ★【COMPATIBLE FUEL: 】Inline Fuel Pump Inlet AN10, Outlet AN 6, Pump Flow and Test Information: Flow Rate: 200 LPH(53 GPH) under 75PSI(5.0 Bar) & 12V. Flow rate:255 LPH(68 GPH) under 43 PSI(3.0 bar) &12V. Flow rate:300 LPH(80 GPH) under 43 PSI(3.0 bar) &13.5V. Operating Voltage:12V. Operating Pressure:75PSI(5.0Bar). Operating temperature range: -68 °F-194 °F.
  • ★【EASY TO INSTALL: 】It is recommended to install below the tank ensures that fuel is gravity-fed from the fuel tank. If the pump is higher than the fuel tank, it is forbidden to flow to the pump and force the fuel to be scratched. If the pump is higher than your fuel tank, prohibit fuel flow to the pump and force fuel to enter the pump..
  • ★【PACKAGE INCLUDE: 】1 x External Fuel Pump, 2 x Rubber Connection Cover, 2 x Terminal, 1 x Large Gasket, 1 x Small Gasket, 1 x Large Nut, 1 x Small Nut.
  • ★【COMPATIBLE FUEL: 】Gasoline, pump gas, race gas, diesel, (Alcohol fuels or E85 can be used, but pump life will be diminished). This Inline High Pressure Fuel Pump is adopts the anodized surface process, which is not easy to fade and has rust proof, scratch proof and waterproof..
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

Universal Electric Fuel Pump Kit 12v 3-6 PSI Low Pressure with Fuel Filters 10 Hose Clamps 6.56 FT 5/16" ID Fuel Line Replacement For Carburetor Lawn Mower Gas Diesel Fuel Transfer Pump

  • ...l 12 volt cars, trucks, carburetor, lawn mower, boats & generators.
  • Inline Fuel Pump Kit Includes: 3-6 PSI Electric Fuel Pump, 1PC Socket Wire, 1Pc Fuel Filters, 2 Meter/6.56-Foot 5/16" ID Fuel Line, 10Pcs Hose Clamp.
  • Low Pressure Fuel Pump: Voltage: 12 Volt, Output Pressure: 3-6 PSI, Flow Reaches: 70 L/H, Hose Size: 8 mm ( 5/16 inch ), Material: Copper Clad Aluminum, Plunger-type of fuel supply.
  • Upgrade check valve provides optimum traffic, reducing the noise of the pump so we can operate quietly.
  • Upgraded Fuel Filter: Upgraded Filter Paper The number of pleats of the filter paper is dense, and it sticks firmly to the shell without gaps.
  • It can filter out impurities, dirt and fuel particles to prevent clogging of the carburetor, only allow clean fuel to flow in and keep the engine charged.
  • 3-Layer Thickened Fuel Line: Length: 6.56 feet(2m), Thickness: 2.99mm.
  • Cold and High Temperature Resistance (-30°to 120°).
  • The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer....
Check Stock

GSL392 Inline Fuel Pump & 58 PSI Fuel Filter Regulator 58 PSI LS Swap Fuel Pump EFI Conversion Fuel Filter Pressure Regulator 255LPH High Pressure External Pump 6AN Fittings 400-939 GSL392-400-939

  • REPLACEMENT 58 PSI FUEL FILTER REGULATOR - Fuel pressure regulator filter kit comes with 6AN adpater fittings for LS Swap , which can deliver 58 PSI (4 BAR) to your fuel rail and return unused gas to the tank. Besides, it can ensure the clean fuel is delivered properly to your engine with a 10 micron fuel filter, which play an important role in protecting the daily operation of the engine, and extending the engine service lifespan..
  • GSL392 HIGH PRESSURE FUEL PUMP - LS Inline fuel pump is designed to start higher-pressure fuel racing or performance-purpose vehicles stably and safely, which can help to meet the requirements of most modern turbocharging applications. At 80 PSI, Yinlowa 255 lph high pressure fuel pump can flow around 132 liters (35 gallons) per hour.
  • At that same 80 PSI the equivalent HP (high pressure) fuel pump can flow over 210 liters (50 gallons) per hour.
  • FITMENTS - GSL392-400-939 Inline Fuel Pump fits EFI applications including turbo and supercharged, variety of pressures and flows available, including high pressure performance.
  • 58 PSI Fuel Pressure Regulator AN-6 Fittings for LS Swap EFI Conversion i....
Check Stock

Universal Electric Fuel Pump Kit 12V (3-6PSI) inline Low Pressure Fuel Pump HEP-02A + 2 Meter/6.56-Foot 5/16' ID Fuel Line + 1/4 Inch & 5/16 Inch Fuel Filters + 10pcs 10-16mm Hose Clamp

  • 【 electric fuel pump Specifications】 Model: HEP-02A.
  • Inline Fuel Pump Output Pressure: 3-6 PSI.
  • Input Voltage: 12 Volt, 80-100 liters flow per hour. Pressure : 0.032-0 .045 MPA.
  • Inlet & Outlet diameter: 8mm (5/16″), Internal Valving to Prevent Back Flow..
  • 【High reliability】Universal Electric Fuel Pumps are Manufactured to OE or Better Standards. Sophisticated Construction, Based on Reliable Material and Fine Craftsmanship, 3-6 psi output pressure provides constant fuel for the engine, Stronger suction to ensure the fuel feeding of the car more stable..
  • 【Perfect Compatibility】Fit for All 12 Volt Cars, carburetor, Trucks, Lawn mower, Boats & Generators, For Ford, and any other cars..
  • 【Package Include】1x 12V electric fuel pump, 1x 2 Meter/6.56-Foot 5/16 Inch Fuel Line, 1x 1/4 Inch & 5/16 Inch Fuel Filters, 10x Hose Clamp..
  • 【quality assurance】 100% brand new Low pressure electric fuel pump.
  • To guarantee customers’ satisfaction, we accept unconditional return service and 2 year warranty. Please contact with us if there’s any quality or other problem. We promise that you will never lose even one buck with our assistance..
Check Stock

Kyostar 380LPH High Pressure Fuel Pump Inline Fuel Pump E85 Compatible Fuel Pump Universal Replace Fit for AN10 Inlet/ AN8 Outlet

  • Extemally Mounted in rear center of the car or truck.
  • Can be installed along with a high performance walbro intank fuel pump or alone..
  • Dimension: Length: 125 mm (main body) 146 mm (fitting seat to fitting seat).Diameter: 60 mm. Inlet : M18x1.5 Metric.Thread Outlet : M12x1.5 Metric.
  • The Fuel Pump Flow and pressure: 370 LPH at 3 Bar (45 PSI),340 LPH at 5 Bar (73 PSI) 8 Bar max..
  • Inline Fuel Pump Current draw: 9 Amp at 3 Bar, 13.5 Amp at 5 Bar..
  • Kyostar 044 Style 380LPH High Pressure Inline E85 Compatible Fuel Pump Universal Replace Fit for AN10 Inlet/ AN8 Outlet.If you have any question about our product,please contact us right away..
Check Stock

Leadrise Universal Electric Fuel Pump Kit 12V (2.5-4psi) Electric Fuel Pump, 2 Meter/6.56-Foot 5/16' ID Fuel Line, Fuel Filters and 10Pcs Hose Clamp

  • ★【Universal Electric Fuel Pump Kit 12V:】 Inline Fuel Pump Kit includes all the component you need: 2.5-4psi Electric Fuel Pump, 2 Meter/6.56-Foot 5/16″ ID Fuel Line, 1Pcs Fuel Filters and 10Pcs Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump..
  • ★【Electric Fuel Pump】Material: Copper Clad Aluminum, Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【3-Layer Thickened Fuel Line】The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer. It is resistant to oil, cold, and ethanol. The inner and outer tubes are made of rubber and the middle reinforcing layer is braided fiber nylon thread. The wall thickness is 3.2mm. The 6.5ft/2m hose can be cut to size for all your applications..
  • ★【Fuel Filter】It can filter impurities, dirt, and fuel particles to prevent clogging of the carburetor and only allow clean fuel to flow in and keep the engine charged..
  • ★【Wide Application】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock

12V Low Pressure Universal Heavy Duty Gas Diesel Inline Electric Fuel Pump HEP-02A 2.5-4 PSI Metal Solid Gasoline Diesel Engine Motorcycle Carburetor Lawn Mower

  • Inline Fuel Pump Inlet & Outlet: 5/16 inch, Internal Valving to Prevent Back Flow.
  • Compatible Electronic Devices All 12 Volt Cars,Trucks,Boats & Generators,Fit for Toyota,Ford,Honda,Mazda,Lexus,Infiniti,Hyundai,KIA And Any Other Suitable Car Truck,Boat,Motorcycle,Carburetor, Lawn Mower,Agricultural ATV,Generators.
  • The function of the fuel pump is to suck the fuel out of the fuel tank, send it to the fuel supply pipe after being pressurized, and cooperate with the fuel pressure regulator to establish a certain fuel pressure..
  • Movement Material: 100% Copper Coil(Does not Contain Aluminum).Size: 5.24 x 3.74 x 2.95 inches. Package Include:1X Fuel Pump..
  • Slother aim to providing you with better products and services. You can contact us first for any problem or concern, your problem will be figured out with our support..
Check Stock

ABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions

  • TEST INJECTOR SYSTEM FUEL PUMPS: The new and improved ABN Comprehensive Universal Fuel Pressure Tester Master Fuel Pressure Gauge Kit is a complete fuel test gauge package that quickly tests the fuel pump pressure on injector systems.
  • NEW & IMPROVED: High-quality fuel pressure gauge hose replacements have been improved with implanted fiber.
  • Fitted with quick coupling system and pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
  • Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
  • FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
  • Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
  • Recommended for older low-pressure systems with mechanical fuel pumps.
  • Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
  • EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
Check Stock