Reviews Low Noies 3 Phase

BOSS Audio Systems CUBE10 Car Subwoofer and Amp Package – Built-in Amplifier, 10 Inch Subwoofer with Passive Radiator, Remote Subwoofer Control

  • ...equency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the CUBE10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Phase Control - Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up “out of phase”.
  • Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the CUBE10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs - Dimensions: 11.22” x 11.22” x 11.22”, Weight: 18.61 lbs..
  • Warranty - BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality.
Check Stock

Juried Engineering CD4046BE CD4046B CD4046 CMOS Micropower Phase-Locked Loop Breadboard-Friendly IC DIP-16 (1 Piece)

  • The HMC830LP6GE is a low-noise, wideband, fractional-N phase-locked loop (PLL)..
  • The HMC830LP6GE features industry-leading phase noise and spurious performance at all frequencies to minimize blocking and improve receiver sensitivity and transmitter spectral purity..
  • The device's outstanding performance makes it a multi-channel, rural standard wideband transceiver. Ideal for devices..
  • Chip features RF Bandwidth: 25-3,000 MHz Phase detector maximum speed: 100 MHz Ultra-low phase noise: -110 dBc/Hz (in-band typical) Quality Factor (FOM): -230 dBc/Hz (integer) 40-pin 6 x 6 mm SMT Package: 36mm.
  • Chip application honeycomb 4G infrastructure/repeaters and femtocells Communication Test Equipment Cable TV equipment phased array application Very high data rate radio Tunable Voltage Reference with Spurious-Free Performance.
Check Stock

TRANGO Phase Quickdraw 6 Pack, 12cm

  • BUILT FOR EVERY PHASE - Functionality for whatever phase you're in.
  • Trango’s Phase wiregate quickdraws are perfect for sport, trad, and alpine objectives.
  • KEEP IT LIGHT - Don’t let your rack weigh you down.
  • Each 12 cm Phase draw weighs only 67 grams.
  • EASY CLIPPING - With their large rope bearing surface and raised ridged on the spine for easy clipping, phase carabiners are ready for whatever you throw at them.
  • LOW BULK DOGBONE - With 22 kN strength and a 11mm width, Trango’s Low Bulk Dogbones are ideal when you need to move fast and efficiently with the utmost confidence in your gear.
  • All Trango carabiners pass UIAA and CE safety standards.
Check Stock

LAPOND High Performance VFD Inverter VFD Drive 2.2KW 220V 3HP 9.6A,Variable Frequency Drive for Motor Speed Control,SVD-PS Series

  • This is single phase VFD with single phase 220V INPUT and three phase 220V OUTPUT,ONLY work with 3 phase 200-250V asynchronous motor,If your motor is heavy load, pls choose a higher Horsepower vfd than your motor's or contact sales for model selection suggestion..
  • SVD-PS Series VFD has better performance Vector controlled and stability to enable motor to achieve high torque in low speed rotation to increase motor working efficiency.
  • support fast accelerate/deccelerate with external optional braking resistor(100W ≥70Ω) and external potentiometer(10K).
  • Rich of digital and analogy control terminals for versitile control, well controlled fans produce low acoustics noise.The fan only work in VFD running status..
  • Application : spindle motor,lathe,milling,pumps,treadmills,conveyors,winding machine, mixer, extruder, slitter, compressor, ventilator,elevator,centrifuger and other machines..
  • We are the original factory,any technical issues do not hesitate to contact us.
Check Stock

BOSS Audio Systems BASS8 8 Inch Under Seat Powered Car Subwoofer – 800 High Output, Low Profile, Built in Amplifier, for Truck, Boxes and Enclosures, Remote Subwoofer Control

  • ...s or low-level inputs, use RCA interconnect cables to link the BASS8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Phase Control - Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up “out of phase”.
  • Specs - Dimensions: 12.20” x 8.86” x 2.95”, Weight: 8.82 lbs. LED status indicator. Thermal, Short and Overload Protection Circuits. High Performance Voice Coil. Rubber Surround. Aluminum Cone, Remote Subwoofer Control.
  • Warranty - BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality.
Check Stock

SZCY LLC AC 220V/2.2KW Variable Frequency Drive, 12A VFD Inverter Frequency Converter for Spindle Motor Speed Control (Single-Phase Input, 3 Phase Output)

  • Application: Spindle Motor, Drill Press, CNC, HVAC, Lathe, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-phase motor and other machines!.
  • Spacing 2.54mm bar connector, 5-pin plug. DC cooling fan low noise, large air volume..
  • The machine is screwed to ensure the safety and reliability of the use. Three anti-paint protection lines, improve and extend the life of the fuselage..
  • The operator panel can be moved out and extended by 2M, 1.5M, 1M, 30CM. 1 Year replace or refund!!!.
Check Stock

Complete Violin Concertos

  • Headphone output: balanced Connection: 4.4mm, 3.5mm x 2, XLR4/unbalanced Connection: 6.3mm, 3.5mm, headphone input: Walkman/Xperia portable to charge Walkman)/USB.
  • Da hybrid amplifier circuit for a sensitive and natural sound, DSD remastering engine converts all PCM source to DSD 11.2MHz, DC phase linearizer simulates the phase character of an analog amplifier.
  • Acoustically tuned panel eliminates unnecessary resonance for sound, fbw chassis (frame, Beam and wall structure) provides rigid structure, eccentricity Insulator prevents mechanical resonance.
  • Double layer bottom plate for a low point of gravity, analog output - use as a D/a converter or pre-amplifier.
Check Stock

Cloudray CNC Roller Rotation Axis Rotary Attachment Rotation Engraver Engraving Machine (2 Phase Stepper Motor)

  • 2 Phase Stepper Motor has 4 Leads, 3 Phase Stepper Motor has 3 Leads. Please confirm before buying..
  • Higher torque and higher speed,Used for CO2 laser engraver cutter ,engraving machine.
  • Reduced motor heating and more efficient.Smooth motion and super-low motor noise..
  • Closed-loop control, no longer lose any steps, up to its maximum torque..
Check Stock

HiLetgo PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Module for Arduino Robot

  • ۞۞۞【Great Torque and Speed Range】This VFD uses unique control method to realize high moment of force, high accuracy and wide speed regulating driving range.
  • ۞۞۞【Great Adaptability and Stability 】It has good anti-trip performance and ability to adapt to rough power supply, temperature, humidity and disturbance and developed with a large heat sink for better cooling that significantly improves stability.
  • ۞۞۞【Low noise & Low Electromagnetic Interference】By optimizing the PWM control technology and the electromagnetic compatibility, the device runs with low noise and low electromagnetic interference.
  • ۞۞۞【Easy to Use】Easy and convenient to use and wire, wires can be connected by screw terminals.
  • ۞۞۞【Parameters】Suitable Motor Power: 2.2kW.
  • Rated Voltage: single-phase/3-phase AC220V.
  • Size: 18 x12.5 x 12.5cm/7.1 x 4.9 x 4.9in.
  • Weight: 1.3kg(approx.) Weight: 1.3kg(approx.).
Check Stock

Fujifilm X-T3 Mirrorless Digital Camera (Body Only) - Black

  • New 26.1MP X Trans CMOS 4 sensor with X Processor 4 image processing engine.
  • 4K movie recording internal SD card 4K/60P 4: 2: 0 10bit recording and the first Mirrorless digital camera with APS C or larger sensor that is capable of 4K/60P 4: 2: 2 10bit HDMI output.
  • 2.16M phase detection pixels across entire frame and low light phase detection limits has been increased over X T2 by 2 Stops, from 1EV to 3EV.
  • 3.69 million dot OLED color viewfinder with 0.75x magnification and blackout free burst shooting.
  • 16 film simulation modes: Including eterna/cinema, B and w adjustment: 9~+9.
Check Stock