Reviews Low Costs

Ames Maximum Stretch - 4.6 Gallon Waterproof Sealant Membrane - Perfect For Roofing, Repairs, Concrete, EPDM & Wood - Liquid Rubber Sealer - Up To 650% Elastic - Made in USA

  • Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
  • Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
  • 650% elongation - does not flake, chip or peel - elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
  • Non-toxic, eco-friendly, low VOC & made in the USA.
  • 4.6 Gallon - Tintable White - Our waterproof roof sealant is packaged in 5 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..
Check Stock

Dpg-200 Vacuum Transducer with

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.
Check Stock

GE LED Standard Light Bulbs, 10 Watts (60 Watt Equivalent) Daylight, Medium Base, Dimmable (4 Pack)

  • UPGRADE YOUR HOME WITH LED LIGHT BULBS: Now you can adjust the mood of your lighting with the simple flip of a switch. The LED bulbs are the easiest way to update your lamps, sconces and open light fixtures..
  • ENERGY EFFICIENT LED LIGHTS: The A19 LED light bulbs last over 13 years (3 hour usage per day), extending the life of your LED lights and reducing your energy costs..
  • MONEY SAVING LED LIGHT BULBS: The GE LED lights will save you $82 in energy costs, compared to a 60-Watt incandescent A19 light bulb over the bulb's life..
  • REPLACE YOUR BULBS WITH LED BULBS: Get the efficiency of low wattage light bulbs, the A19 LED light bulbs are the easiest way to cut costs without sacrificing brightness or functionality..
  • ENERGIZING DAYLIGHT: The LED bulb offers a cool, bluish-white LED light perfect for energizing moments and active spaces. These light bulbs are great for frequently used fixtures and are not for use in enclosed fixtures..
Check Stock

MICHELIN Serpentine Drive Belt SMAMV6PK2070

  • Optimize Costs and Reduce CO2 Emissions - Our serpentine drive belts are high-performance components able to withstand difficult engine environments with high speed, high temperatures, and wet conditions, making them especially durable and wear-resistant. Increased flexibility and reduced weight optimize costs and reduce CO2 emissions..
  • Built-In Tension and Product Warranty - MICHELIN belts are available with polyamide cord, which allows the belt to automatically maintain the right belt tension over time. This provides compact, low-noise drive solutions with low maintenance and higher cost-effectiveness. Also includes a one-year product warranty for defects in material and workmanship under normal use and service..
  • This product is designed to fit specific vehicles per the OEM design and requirements.  Please confirm with your vehicles owner’s manual or OEM specification to ensure correct part specification before purchasing this component.  Note that engine size, accessory options and other options can impact the product size and design.  If further assistance is needed contact the seller directly for additional product information and availability..
  • Replaces 5060815, 6PK2070, K060815 OE part numbers..
Check Stock

MICHELIN Serpentine Belt SMAMV4PK895S

  • Optimize Costs and Reduce CO2 Emissions - Our serpentine drive belts are high-performance components able to withstand difficult engine environments with high speed, high temperatures, and wet conditions, making them especially durable and wear-resistant. Increased flexibility and reduced weight optimize costs and reduce CO2 emissions..
  • Built-In Tension and Product Warranty - MICHELIN belts are available with polyamide cord, which allows the belt to automatically maintain the right belt tension over time. This provides compact, low-noise drive solutions with low maintenance and higher cost-effectiveness. Also includes a one-year product warranty for defects in material and workmanship under normal use and service..
  • This product is designed to fit specific vehicles per the OEM design and requirements.  Please confirm with your vehicles owner’s manual or OEM specification to ensure correct part specification before purchasing this component.  Note that engine size, accessory options and other options can impact the product size and design.  If further assistance is needed contact the seller directly for additional product information and availability..
  • Replaces 5040353, 4PK0895, K040353 OE part numbers..
  • 4 Ribs 35.2 In.x0.54 In. - 895 mmx13.716 mm.
Check Stock

MICHELIN Serpentine Drive Belt SMAMV6PK1880

  • Optimize Costs and Reduce CO2 Emissions - Our serpentine drive belts are high-performance components able to withstand difficult engine environments with high speed, high temperatures, and wet conditions, making them especially durable and wear-resistant. Increased flexibility and reduced weight optimize costs and reduce CO2 emissions..
  • Built-In Tension and Product Warranty - MICHELIN belts are available with polyamide cord, which allows the belt to automatically maintain the right belt tension over time. This provides compact, low-noise drive solutions with low maintenance and higher cost-effectiveness. Also includes a one-year product warranty for defects in material and workmanship under normal use and service..
  • This product is designed to fit specific vehicles per the OEM design and requirements.  Please confirm with your vehicles owner’s manual or OEM specification to ensure correct part specification before purchasing this component.  Note that engine size, accessory options and other options can impact the product size and design.  If further assistance is needed contact the seller directly for additional product information and availability..
  • Replaces 5060740, 6PK1880, K060740 OE part numbers..
  • 6 Ribs 74 In.x0.82 In. - 1880 mmx20.828 mm.
Check Stock

MICHELIN Serpentine Drive Belt SMAMV7PK2120

  • Optimize Costs and Reduce CO2 Emissions - Our serpentine drive belts are high-performance components able to withstand difficult engine environments with high speed, high temperatures, and wet conditions, making them especially durable and wear-resistant. Increased flexibility and reduced weight optimize costs and reduce CO2 emissions..
  • Built-In Tension and Product Warranty - MICHELIN belts are available with polyamide cord, which allows the belt to automatically maintain the right belt tension over time. This provides compact, low-noise drive solutions with low maintenance and higher cost-effectiveness. Also includes a one-year product warranty for defects in material and workmanship under normal use and service..
  • This product is designed to fit specific vehicles per the OEM design and requirements.  Please confirm with your vehicles owner’s manual or OEM specification to ensure correct part specification before purchasing this component.  Note that engine size, accessory options and other options can impact the product size and design.  If further assistance is needed contact the seller directly for additional product information and availability..
  • Replaces 5070835, 7PK2120, K070835 OE part numbers..
  • 7 Ribs 83.5 In.x0.96 In. - 2120 mmx24.384 mm.
Check Stock

MICHELIN Serpentine Drive Belt SMAMV6PK2225

  • Optimize Costs and Reduce CO2 Emissions - Our serpentine drive belts are high-performance components able to withstand difficult engine environments with high speed, high temperatures, and wet conditions, making them especially durable and wear-resistant. Increased flexibility and reduced weight optimize costs and reduce CO2 emissions..
  • Built-In Tension and Product Warranty - MICHELIN belts are available with polyamide cord, which allows the belt to automatically maintain the right belt tension over time. This provides compact, low-noise drive solutions with low maintenance and higher cost-effectiveness. Also includes a one-year product warranty for defects in material and workmanship under normal use and service..
  • This product is designed to fit specific vehicles per the OEM design and requirements.  Please confirm with your vehicles owner’s manual or OEM specification to ensure correct part specification before purchasing this component.  Note that engine size, accessory options and other options can impact the product size and design.  If further assistance is needed contact the seller directly for additional product information and availability..
  • Replaces 5060875, 6PK2225, K060875 OE part numbers..
  • 6 Ribs 87.6 In.x0.82 In. - 2225 mmx20.828 mm.
Check Stock

MICHELIN Serpentine Drive Belt SMAMV6PK2400

  • Optimize Costs and Reduce CO2 Emissions - Our serpentine drive belts are high-performance components able to withstand difficult engine environments with high speed, high temperatures, and wet conditions, making them especially durable and wear-resistant. Increased flexibility and reduced weight optimize costs and reduce CO2 emissions..
  • Built-In Tension and Product Warranty - MICHELIN belts are available with polyamide cord, which allows the belt to automatically maintain the right belt tension over time. This provides compact, low-noise drive solutions with low maintenance and higher cost-effectiveness. Also includes a one-year product warranty for defects in material and workmanship under normal use and service..
  • This product is designed to fit specific vehicles per the OEM design and requirements.  Please confirm with your vehicles owner’s manual or OEM specification to ensure correct part specification before purchasing this component.  Note that engine size, accessory options and other options can impact the product size and design.  If further assistance is needed contact the seller directly for additional product information and availability..
  • Replaces 5060945, 6PK2400, K060945 OE part numbers..
  • 6 Ribs 94.5 In.x0.82 In. - 2400 mmx20.828 mm.
Check Stock

MICHELIN Serpentine Drive Belt SMAMV7PK1780

  • Optimize Costs and Reduce CO2 Emissions - Our serpentine drive belts are high-performance components able to withstand difficult engine environments with high speed, high temperatures, and wet conditions, making them especially durable and wear-resistant. Increased flexibility and reduced weight optimize costs and reduce CO2 emissions..
  • Built-In Tension and Product Warranty - MICHELIN belts are available with polyamide cord, which allows the belt to automatically maintain the right belt tension over time. This provides compact, low-noise drive solutions with low maintenance and higher cost-effectiveness. Also includes a one-year product warranty for defects in material and workmanship under normal use and service..
  • This product is designed to fit specific vehicles per the OEM design and requirements.  Please confirm with your vehicles owner’s manual or OEM specification to ensure correct part specification before purchasing this component.  Note that engine size, accessory options and other options can impact the product size and design.  If further assistance is needed contact the seller directly for additional product information and availability..
  • Replaces 5070700, 7PK1780, K070700 OE part numbers..
  • 7 Ribs 70.1 In.x0.96 In. - 1780 mmx24.384 mm.
Check Stock