Reviews Long distance Infrared Ray

Calvas USB Media IR Wireless Mouse Remote Control Multifunction Controller USB Receiver for Windows Xp Vista Laptop PC Computer

  • USB interface, plug and play, no need driver..
  • Support software:WMP,Real palyer,KMPlayer,TTPlay,WinDVD,PowerDVD.
  • The infrared ray control from a distance..
Check Stock

105dB Wireless Alarm System Infrared Motion Detector Home Security Wall Detector Detector

  • More than 30 m of wireless remote control long distance and multichannel, easy to use. Turn on the power switch. If the power light is blinking, the white check mark is normal. The remote infrared alarm has a waiting time of 20 seconds immediately after turning on the power and does not detect the alarm signal within 20 seconds. You must leae the detection zone of the electronic dog within 20 seconds..
  • After 20 seconds, if someone enters the detection zone, the remote infrared alarm will hae a delay of 5 seconds, which will facilitate the identification of the owner. if no command identification signal is receied after 5 seconds, the alarm sounds hard for 30 seconds with an alarming 105 DB. 5 seconds after the end of the alarm sound, if the remote infrared alarm is touched for the second time, the alarm sounds again.
  • When the remote infrared alarm is alar....
Check Stock

Infrared Sensor, Motion Sensor Smart Infrared Sensor PIR Human Motion Detector Intelligent Interconnected 150° Wide Angle for Zigbee 3.0 Motion Detector for Home Security System

  • High Sensitivity --- The detection distance of the infrared sensor is up to 7 meters, and it supports a wide angle of 150 degrees, with high sensitivity and high precision. Long-distance infrared induction, infrared induction can reach 7 meters, the protection is more sensitive and safer..
  • Adjustable base --- The human motion detector is equipped with a 360-degree rotating base, which can easily adjust the detection angle, which is more convenient. It is suitable to be installed on the wall or other objects at any angle, and can be adjusted flexibly to meet the requirements..
  • Application --- Smart sensor can be used in Zigbee 3.0, different levels of home security system, mobile application can check the status anytime and anywhere. Simply install the sensor on the side of the gate entrance or wherever you need to detect passing people..
  • Low power consumption --- The infrared sensor automatically turns off other appliances in the house when it detects that there is no one in the house. Safe and power saving. Made of ABS material, durable and long service life..
  • Easy installation --- The human motion detector is small in size, light in weight, easy to install, no tools required, and can be placed at will. Simple to operate, do whatever you want,....
Check Stock

uxcell IR Infrared Receiver Extender Cable 3.5mm Jack 4.9FT Long 26-39FT Receiving Distance Red Head 5pcs

  • Product: IR Infrared Remote Control Receiver Cable.
  • Wide angle, strong signal, long distance. Resistant to ambient light effects. Works with all 38-56kHz IR remote control and devices with an IR input port..
  • Wide voltage adaptation, low power consumption, high sensitivity, excellent anti-interference characteristics, tiny, elegant stick-on design..
  • Widely used in set-top boxes, LED light bar controllers, driving recorders, digital photo frames, household appliances, and other various products to assist in extending remote control reception..
  • Note: Please confirm whether the electrical equipment has an infrared interface and confirm the size of the infrared interface. Stick the infrared received head to the side of the IR sensor, do not cover it, otherwise, the remote control will be insensitive..
Check Stock

Infrared Repeater System IR Repeater Kit Control Up to 10 Devices Hidden IR System Infrared Remote Control Extender Kit

  • Infrared Repeater Kit controls your IR remote controlled devices that are hidden behind doors or in other rooms. Kit controls up to 10 devices - Expandable to 12 devices.
  • IR Repeater controls up to 10 home theater devices kept behind closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System. This product allows you to control A/V equipment with your existing IR remote controller, such as: amplifier, cable box, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player, Etc.
  • IR Repeater Kit comes with broadband remote control, it is compatible with almost all the electronics appliances in the market with its wide frequency range. IR remote control repeater ( transceiver) is a product which amplifies the IR signal of your appliances, you may be able to conceal your appliances such as in your TV console or cabinet.
  • High sensitivity, Real time transmission without any delay with its high sensitivity sensor. Remote indication lights on IR receiver:green being power connected while flashing red indicates the signal is being sent. CFL friendly: this duafire unit can be installed in an area with compact fluorescent lighting and work in the most lighting environments.
  • Note: plasma displays emit IR frequencies ....
Check Stock

uxcell IR Infrared Emitter Extension Cable 4.9ft Long 45 Degree Emission Angle 3.5mm Jack Single Red Head 2pcs

  • Works with all 38-56kHz IR remote control and devices with an IR input port..
  • Low current drive, low power consumption, long launch distance, small size installed..
  • Applied to infrared forwarding equipment, audio and video transmission equipment, IR remote wireless transceiver, centralized control equipment, etc..
  • Please note that the infrared emitter head is glued to the side of the infrared receiver tube, do not cover it, otherwise the device will not be used, and it will be insensitive to remote control by remote control..
Check Stock

Gone in 60 Seconds

  • ➤Works with all 38-56kHz IR remote control and devices with an IR input port..
  • ➤Low current drive, low power consumption, long launch distance, small size installed..
  • ➤Applied to infrared forwarding equipment, audio and video transmission equipment, IR remote wireless transceiver, centralized control equipment, etc..
  • ➤Please note that the infrared emitter head is glued to the side of the infrared receiver tube, do not cover it, otherwise the device will not be used, and it will be insensitive to remote control by remote control ..
Check Stock

Envely Self-Skincare Device With Galvanic ion Far-infrared Ray and Vibration

  • Galvanic ion function : It uses the positive and negative poles of the rectified current to manage sebum and dead skin cells in the pores and helps to....
  • Infrared Ray function : Infrared ray gives healthy and vibrant skin with its thermal therapy..
  • Vibration function : Vibration relaxes and contracts the muscle and helps your skin to be healthier and more elastic..
  • Step function : Cleanse, Massage, Nutrition, Lifting, Whitening, Wrinkle Care.
  • Components : Body, device holder, charger (100 ~ 240V), pouch, instruction manual.
Check Stock

G.T.Master Replace Circuit Control Board for GT1100DC and GT1800DC Sliding Gate Openers

  • GT2200 Sliding Gate Opener -- The gate weight is less than 2200lb and length is less than 40ft. The length of the chain is 20ft, it can be shortened. If it need to be lengthened, make sure to use same type of chain..
  • Remote Control -- Remote control is single button mode, one same button on the remote control to circularly control the main engine OPEN/STOP/CLOSE/STOP, the three buttons have the same function, the other button is pedestrian mode. Supports up to 25 Remotes (Including batteries)..
  • Infrared Photocell Function -- In the closing process, when infrared ray of the infrared sensor is covered, the gate will open immediately, to protect user and property security. (The Infrared sensor is free as a gift.).
  • Automatic Close Function -- Auto-Close time can be set to 12, 24, or 36 seconds with no automatic close function..
  • Intelligent Control Board -- Soft start and slow stop function,which can extend the life of the gate opener and safer. Long-range control, compatible with HOMELINK system, fast and convenient..
Check Stock

Wii Sensor Bar Replacement Wii U Sensor Bar Suitable For Nintendo Wii Sensor Bar Wireless PC

  • Wireless Wii motion sensor bar for Nintendo Wii/ Wii U console, compatible with PC Dolphin emulator. Third party product.
  • Convenient wireless design, completely no worries about excess cable clutter, ideal replacement for the wired Wii sensor bar.
  • This sensor bar has 6 infrared ray launcher (3 for each side), detect the movement of your remote controller in a distance precisely.
  • Wii sensor bar is a must-have for Wii/ Wii U games. Motion sensor bar is powered by 4 AAA batteries (Battery is not included).
  • Come with a holder, easily attachment to TV, monitor or any smooth surface. You can place the sensor above the TV or below the TV.
Check Stock