Reviews Long Hole Shaft

3000 psi Pressure Washer Pump for Excell Devilbiss XC2800 XR2750 XR2750-01 New

  • BRAND NEW OEM PRESSURE WASHER PUMP FOR 2800-3000 PSI UNITS.
  • Specs:2800-3000 PSI / 2.4 GPM – MAX 2.5 GPM FACTORY RATING, BRASS HEAD PUMP, INCLUDES THERMAL RELEASE VALVE, Chemical Injector. FITS 3/4″ SHAFT HOLE DISTANCES ARE 2 5/8″ CENTER TO CENTER ON OUTER HOLES / 1 7/8″ FROM CENTER SHAFT HOLE TO EACH OUTER HOLE..
  • **Fits Honda Excell units with 3/4″ shaft only!!! Some Excell units have the 7/8″ shaft and this pump will not work!**.
  • UNIVERSAL PUMP – FITS MANY MAKES AND MODELS! INCLUDES THERMAL RELEASE VALVE.
Check Stock

Stainless Steel Shaft, Linear Shaft, Mechanical Shaft for Industrial Robot Accessories

  • PRECISE CONNECTION - effectively prevent the parts from rotating and slipping on the hexagonal shaft, so that the parts are more evenly stressed, and the efficiency of the driving force is enhanced..
  • APPLICABLE MATCHING - Circlip groove hexagonal shaft has the advantages of round shaft and hexagonal shaft, and can be used with different hexagonal hole matching robot parts..
  • STAINLESS STEEL MATERIAL - Made of stainless steel material, high hardness, not easy to break, wearproof, durable, long service life, stable performance, to meet your different needs..
  • COMPATIBLE WITH - Can pass through bearings with an inner diameter of 8mm, used in conjunction with robot parts matching hexagonal holes, to enhance load carrying capacity and transmission capacity..
  • THREAD - The hexagonal shaft with spring groove and thread is convenient to limit the axial movement of the bearing in the combination, effectively improving the work efficiency..
Check Stock

ABN Trailer Tow Hitch Lock Pin and R-Clip, 4in x 3/8in – For Towing Cargo, Boat, RV, Car, Truck, Bike, ATV

  • USE YOUR HITCH: Replace old pins and hitch up anything with the ABN Trailer Tow Hitch Lock Pin and R-Clip, 4" x 3/8" Inch – For Towing Cargo, Boat, RV, Car, Truck, Bike, ATV.
  • No more struggling to get out those pins, because this hitch pin makes coupling implements and machinery an easy task.
  • PERFECT SIZE: 4-inch (10.2cm) usable length.
  • 6.75-inch (17.1cm) overall length (shaft and handle included).
  • 0.4-inch (10mm) length from pin hole to flat shaft end.
  • Hole for the clip has 0.2-inch (4mm) diameter.
  • GRIP COMFORTABLY: Vinyl coated handle can be gripped and used for pulling force (easier than bent pin design with no leverage available).
  • Attractively bright red handle makes it easy to find when not in use.
  • BUILT TO LAST: Constructed from high-tensile steel and is heat-treated with a powder-coated black finish for long life against weathering.
  • PACKAGE CONTENTS: Package includes (1) hitch pin tool with handle and (1) hitch pin R-clip (hairpin spring cotter bridge pin) for your convenience.
Check Stock

DJI Mavic 2 Low-Noise Propellers for Mavic 2 Zoom, Mavic 2 Pro Drone Quadcopter Accessory Replacement - Part 13 (Bundle: 2 Pairs)

  • AB forward and reverse propellers，is suitable for motors with shaft diameter of 0.8MM, such as 614,615,716, etc. Please note that 716 has two kinds of motors, one with shaft diameter of 0.8mm and the other with shaft diameter of 1.0 mm. Our mini propeller is only suitable for motors with shaft diameter of 0.8MM, and the propeller blades are 46 mm long..
  • Mini propeller, durable and light，Made of nylon material,Well-made and well-balanced, strong toughness and not easy to break..
  • Quick installation and disassembly without using other tools. When installing, you need to cross the same two together. If the A side is installed on the B side, it can't fly. It needs to be readjusted and the size needs to be the same as your own product before it can be used..
  • This is a propeller with a length of 46 mm/1.8 inch, and its central shaft hole is 0.8 mm/0.03 inch. It needs to be accurately matched to the size of the central hole of your product and the length of the propeller blade before it can be used correctly. Please carefully match the specifications you need..
Check Stock

Frabill Pro Thermal Original Tip-Up, Multi, One Size (1660)

  • The original insulated tip-up | Prevents hole from freezing up | Covers 10" hole.
  • Easy to carry design | Fits in 5- to 6-gallon bucket for simple storage.
  • Pre-lubed with Sub-Zero low-temp lubricant | Shaft-in-shaft design allows re-greasing for many seasons of successful ice fishing.
  • Dual trip settings (light or heavy) | Removable spool shaft.
Check Stock

uxcell Aluminum Steering Arm, 3mm for RC Car Double Arm Horn Parts Rod

  • distance from hole center to hole center:approx. 16mm,21mm..
  • APPLICATION - used in the steering gear output shaft or DC motor shaft, drive to play the role of the fixed side of the hole with the top wire..
  • FEATURE - alloy body makes it work better than plastic one,stronger and solid..
  • PACKAGE CONTENT - 1pc x aluminum servo arm with screw..
Check Stock

RHKING Two Stage Auger Adapter Precision Durable Alloy Steel for use with Auger Drill

  • ✅ APPLICATION:The adapter allows you to use your Power drill with Auger Drill. Suitable the 3/4 inch internal diameter of the auger shaft and 7/8inch internal diameter of the auger shaft..
  • ✅ MANUFACTURE:Auger adapter are made of alloy steel with high strength, Quenching treatment, being hard chrome plated and good wearing resistance. good impact resistance and good deformation resistance..
  • ✅ SIZE:Auger adapter Overall Length: 5inch,Body Diameter: 0.71inch and 0.86inch.Bolt hole is 0.25inch hole and 0.31 inch hole. Fits drill chucks 1/2 inch and larger..
  • ✅ EASY TO USE:Three flat milled sides to fit in 1/2 inch drill chuck,flat surfaces large enough，Longer shank for the Power drill to clamp securely without slipping..
  • ✅ DIY DESIGN:If you use it for an ice auger, you can DIY make a Auger Stop plate, install it on the step of the adapter, and clamp it with the inner hole internal diameter 5/8 Shaft Collar, so as to prevent the auger from falling into the water..
Check Stock

0.5 Modulus Small Reduction Ratio Of 1:10 Motor Output Copper Worm Wheel Gear - Modulus : 0.5 - Number Of Teeth:20

  • Set include one 0.5 modulus 5MM Hole Dia brass gear shaft and one 20 T brass worm gear wheel..
  • The transmission structure of shaft is simple, compact, small volume and light weight..
  • Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission..
  • High quality material selection, carefully processing create high quality product..
Check Stock

CNBTR 4mm Bore Hole Diameter Brass Gear Shaft with 60 T Wheel 0.5 Modulus Set Drive Gear Box Shaft

  • Set include one 0.5 modulus 4MM Hole Dia brass gear shaft and one 60 T brass worm gear wheel..
  • The transmission structure of worm shaft is simple, compact, small volume and light weight..
  • Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission..
  • High quality material selection, carefully processing create high quality product..
Check Stock

Youngtown High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands

  • Clock movement replacement: high torque clock with 2 hooks, long shaft, drive long clock hands (10 mm to 450 mm)..
  • Movement size: Total shaft length is 23 mm (29/32 inch), thread length is 12mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel..
  • Size from the hole center to the tip: the hour hand is approx. 203 mm/ 8.0 inches long.
  • The minute hand is about 305 mm/ 12 inches in length..
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames..
  • Warm notice: when you install them, please keep the hour hand and minute hand parallel.
  • And please do not use too much pressure to avoid bending them..
Check Stock