Reviews Liquid Level Gauges

Supply Giant S1522-1 Water Pressure Test Gauge, 60 PSI, 0-60

  • Brass wetted parts for measuring non-corrosive liquid and gas pressure.
  • Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.
  • Measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar).
  • Display accuracy is + or - 2.5% of full scale value for the 1.5" (40 mm) and 2" (50 mm) gauges, and + or - 1.5% of full scale value for the 2.5" (63 mm) and 4" (100 mm) gauges.
  • Lower mount or center back male connection with 1/8.
Check Stock

GlowShift 6-Gauge Cluster Package Compatible with Chevy C10 1973-1987 - Black 7 Color Speedometer, Tach, Oil Pressure, Water Coolant Temp, Fuel Level & Volt Gauges - Direct Fit Dashboard Panel Pod

  • GlowShift 6-Gauge Cluster Package features a Replacement Dashboard Panel Pod Compatible with the 3rd Generation 1973-1987 Chevrolet Chevy C10 C20 C30 Box/Square Body & a Black 7 Color Series 6-Gauge Set that Includes Speedometer, Tachometer, Oil Pressure, Water Coolant Temperature, Fuel Level & Volt Gauges.
  • Oil Pressure Readings from 0 to 100 PSI with 1/8-27 NPT Sensor - Water Temperature Readings from 100° to 300°F with 1/8-27 NPT Sensor - Volt Readings from 8 to 18V - Fuel Level Readings from E, 1/4, 1/2, 3/4, F - Tachometer Readings from 0 to 10,000 RPM - Speedometer Readings from 0 to 140 MPH - All-in-1 Gauge Harness Connects & Powers All Gauges from 1 Easy to Use Harness - Includes Wiring Harnesses, Gauge Visors, In-Dash Mounting Brackets, Mounting Hardware & Installation Instructions.
  • Cluster Dashboard Panel Pod Mounts 6 Aftermarket Automotive Gauges to the Truck's Dashboard Cluster - Holds (2) 3-3/4" (95mm) & (4) 2-1/16" (52mm) Gauges - Completely Replaces the Stock Cluster Dashboard Panel - Manufactured from High-Quality ABS Plastic - Designed to Protect Against Warping, Cracking & Color Fading - Includes Steerin....
Check Stock

GlowShift 6-Gauge Cluster Package Compatible with Chevy C10 1973-1987 - Tinted 7 Color Speedometer, Tach, Oil Pressure, Water Coolant Temp, Fuel Level & Volt Gauges - Direct Fit Dashboard Panel Pod

  • GlowShift 6-Gauge Cluster Package features a Replacement Dashboard Panel Pod Compatible with the 3rd Generation 1973-1987 Chevrolet Chevy C10 C20 C30 Box/Square Body & a Tinted 7 Color Series 6-Gauge Set that Includes Speedometer, Tachometer, Oil Pressure, Water Coolant Temperature, Fuel Level & Volt Gauges.
  • Oil Pressure Readings from 0 to 100 PSI with 1/8-27 NPT Sensor - Water Temperature Readings from 100° to 300°F with 1/8-27 NPT Sensor - Volt Readings from 8 to 18V - Fuel Level Readings from E, 1/4, 1/2, 3/4, F - Tachometer Readings from 0 to 10,000 RPM - Speedometer Readings from 0 to 140 MPH - All-in-1 Gauge Harness Connects & Powers All Gauges from 1 Easy to Use Harness - Includes Wiring Harnesses, Gauge Visors, In-Dash Mounting Brackets, Mounting Hardware & Installation Instructions.
  • Cluster Dashboard Panel Pod Mounts 6 Aftermarket Automotive Gauges to the Truck's Dashboard Cluster - Holds (2) 3-3/4" (95mm) & (4) 2-1/16" (52mm) Gauges - Completely Replaces the Stock Cluster Dashboard Panel - Manufactured from High-Quality ABS Plastic - Designed to Protect Against Warping, Cracking & Color Fading - Includes S....
Check Stock

MEANLIN MEASURE -30~30Psi Stainless Steel 1/4\ NPT 2.5\ FACE DIAL Vacuum Pressure Gauge ，Center Back Mount

  • Brass wetted parts for measuring non-corrosive liquid and gas pressure.
  • Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.
  • Measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar).
  • Display accuracy is + or - 2.5% of full scale value for the 1.5" (40 mm) and 2" (50 mm) gauges, and + or - 1.5% of full scale value for the 2.5" (63 mm) and 4" (100 mm) gauges.
  • Lower mount or center back male connection with 1/8.
Check Stock

5 Gauge Speedometer Set, Digital Gauge Cluster, Black Face, 3-3/8, Mechanical Speedometer

  • This complete gauge kit includes the necessary tubing, adapters, and fuel level sender to install it into nearly any vehicle.
  • Black face with stainless bezel delivers a classy seamless look.
  • 3-3/8" speedometer and 2-1/16" component gauges fit a variety of dash inserts and bezels.
  • Speedometer has 5/8"-18 connection for a speedometer cable (cable is sold separately).
  • All five gauges are perimeter lit with white lighting to ensure visibility at night.
Check Stock

Oil Pressure Gauge Adapter, 1/8in NPT Female to M10x1.0 Male Reducer Oil Pressure Gauge Adapter Replacement Black

  • ... Shovelhead) (84-99 Evolution) and (38-69 & 84-91 Big Twin Models) Engines ONLY. Fittings allow for a FLAT MOUNT (or) 45 Degree Mount depending on the application. Triple-chromed / Brass INTERNALS. 1/8 NPT main Male Fitting.
  • VMS RACING Oil Pressure Gauge Kit Provide you with a MORE ACCURATE OIL PRESSURE READING than Liquid Filled Oil Pressure Gauges. Liquid Filled Gauges tend to lose the liquid due to Engine Vibration. You eliminate that problem with this gauge. This Kit allows for accurately measuring Oil pressure in your Big Twin Engine. Proper Oil pressure is CRITICAL at full throttle to prevent premature engine wear. For this reason, you need to arm yourself with the best indicator of accurate information..
  • Compatible with HD Big Twin Models 84 85 86 87 88 89 90 91 1984 1985 1986 1987 1988 1989 1990 1991 BIG V TWIN V-TWIN Engine Motor Models . IMPORTANT NOTE: (70-84 Shovelhead) (84-99 Evolution) and (38-69 & 84-91 Big Twin Models) Engines ONLY.
Check Stock

240-33 ohms 4' (100mm) Fuel Tank Sending Unit for Marine Boat Truck Car Fuel Sending Unit Marine Fuel Gauge Sending Unit Truck Gas Tank Fuel Sender Fuel Water Level Sensor

  • ...teel, which is reliable and durable, anti-vibration, explosion-proof, can read data accurately, and can maintain excellent performance in various environments.
  • Wide Range of Application: The fuel gauge sending unit is widely used in boat, truck, bus and marine fields, and can support marine and automotive fuel level gauges and water level gauges.
  • Simple Installation: The package comes with mounting screws, washers, just remove the old gas tank fuel sender and install the new one, the water level sensor is a standard SAE 5 hole mounting pattern, and the installation takes about 15 minutes in total, you can let the fuel gauge work again, the red wire is positive and the blue wire is negative.
  • Please Note: In order to keep the fuel water level sensor from touching the bottom of the tank, if the tank is made of metal, the length of the sensor should be 0.5 inch less than the depth of the tank. If the tank is made of plastic, the length of the sensor should be 1inch less than the depth of the tank.
Check Stock

Taidacent Non Contact Water Level Sensor Flow Sensor Float Switch Water Level Switch High and Low Level Output

  • The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container..
  • The liquid level sensor (probe) is installed above and below the outer wall of the container to be tested (the high and low positions of the liquid level). The non-metallic container does not need to be opened, and the installation is simple and does not affect the production..
  • The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected..
  • The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used..
  • High and low level output: If there is induction, the output is high level.
  • no induction, the output is low level. Specially designed for non-metallic pipe liquid level detection.
Check Stock

UHARBOUR Glycerin Filled Vacuum Pressure Gauge, 2-1/2\ Clear dial,1/4\NPT Bottom Connection, Stainless Steel Case, Brass Movement, Dual Scales -30inHg/-1BAR-0

  • Brass wetted parts for measuring non-corrosive liquid and gas pressure.
  • Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.
  • Measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar).
  • Display accuracy is + or - 2.5% of full scale value for the 1.5" (40 mm) and 2" (50 mm) gauges, and + or - 1.5% of full scale value for the 2.5" (63 mm) and 4" (100 mm) gauges.
  • Lower mount or center back male connection with 1/8.
Check Stock

Winters PFQ Series Stainless Steel 304 Single Scale Liquid Filled Pressure Gauge with Brass Internals, 0-60 psi, 2-1/2\ Dial Display, +/-1.5% Accuracy, 1/4\ NPT Bottom Mount

  • Brass wetted parts for measuring non-corrosive liquid and gas pressure.
  • Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.
  • Measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar).
  • Display accuracy is + or - 2.5% of full scale value for the 1.5" (40 mm) and 2" (50 mm) gauges, and + or - 1.5% of full scale value for the 2.5" (63 mm) and 4" (100 mm) gauges.
  • Lower mount or center back male connection with 1/8.
Check Stock