Reviews Liquid Flux
No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance (6 Pieces)
- ...inches long and 2.5 mm/ 0.1 inches wide, which is convenient to hold in hand.
- Please check the size carefully before purchasing.
- Quality material: these no-clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder.
- The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents.
- Practical tools: 10-ml solder flux pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin.
- The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards.
- Wide applications: these flux pens and braided solder wicks can be applied for laboratory, computer, home repairs and correcting small PCB board errors and through-hole solder joints, electronics welding, etc., bringing a lot of convenience to your work and improving efficiency.
Check StockAquiflux Self Pickling Flux for Precious Metals Gold Silver Jewelry and Hard Soldering 8 Oz Half Pint
- Includes: one half-pint (8 fluid ounces within a spray bottle).
- Yellow-green and self-pickling, it is the best in water-based fluxes.
- Use this hard flux on Gold, Silver, Platinum, and other metals with high melting point.
- The benefit of liquid flux is that its transparency will let you see the solder joint more clearly when soldering and the liquid flows better in....
Check StockNovacan Old Masters Flux - 8 Oz
- Kester 1544 Liquid Flux Repackaged by CML Supply in this convenient dispensing bottle.
- Compatible with Lead and Lead-Free Solders.
Check StockKester 951 Liquid Soldering Flux, No-Clean, 2-ounce Bottle
- Kester 951 Liquid Flux Repackaged by CML Supply in this convenient dispenser.
Check StockForney 60300 Solder Flux Brush, 3-Pack
- Also used for solder and other applications.
Check StockGSC International 9001-1 Gas Generating Bottle, 500 mL
- Low density polyethylene (ldpe) durastatic liquid dispensing flux bottles with blunt needle tips are safe to use around static sensitive components.
- Esd properties are embedded into the bottle and conductive cap for longer product life. Embossed with esd protective symbol.
- Silicone free - not migratory additives or surfactants to cause contamination or oily surface.
- Volume resistance: 1 x 10e7 ohms to 1 x 10e10 ohms per ansi/esd Std11.15.
Check Stock3 Pieces No Clean Soldering Flux Pen Rosin Solder Flux Pen for Electronics Tabbing Wiring Solder, Welding Maintenance of PCB Board, No
- Quantity and size: package contains 3 pieces soldering flux pens, enough quantity for meeting your daily usage and replacement.
- Each soldering flux pen measures approx. 5.6 inches in length.
- Safe to use: these flux pens are made of quality material, no leak and safe to use.
- Low solids content and quality of the activator system results in practically no residue left on the assembly after soldering.
- No residue will interfere with electrical testing.
- Useful and practical: no clean soldering flux pen is a novel tool for rework and repair welding.
- It allows controlled application of flux, thereby removing dirt in the flux bottle.
- Pen tip of 10 ml with practical designed felt tip.
- The solid content is low and there is almost no residue.
- Wide application: rosin solder flux pen is suitable for automotive, computer, work for rework, and through hole solder joints.
- It is lightweight and would not occupy too much space, suitable pocket size to carry.
- How to use: before the first time use, you should press the pen tip 1 - 2 times for releasing air, then use no clean solder flux pen to remove the oxidizing wax.
- After that, you can use the alcohol to clean the pen.
Check StockBEEYUIHF Rosin Soldering Paste Flux, Solder Paste Flux, Flux for Soldering, For SMD PCB Soldering & Repair, Electrical Soldering Rosin Flux (1.76oz/50g)
- BEEYUIHF #7150 Soldering Paste Net weight: (1.76oz/50g) Rosin Solder Paste Flux, made of no acid, Lead-Free, No-Clean, soldering flux paste which is not easy to dump. Rosin Soldering Paste,High Purity,Good helper for repairing and welding..
- Soldering Flux Paste Feature: No corrosion, high intensity joint, good immersion, good insulation, good soldering properties, smooth welding surface..
- Flux for soldering application: Maintenance drag soldering, BGA planting tin, maintenance desoldering, electronic components soldering, mobile phone maintenance, mobile phone chip maintenance, LED lighting, home appliance maintenance.Have strong oxide removal effect to gold-copper alloy substrate and wire..
- #7150 paste flux features: Lead-free, halogen-free, acid-free, no cleaning, less residue, easy to tin, less smoke, help soldering firm, make soldering fluidity better, slightly yellow paste..
- Solder Flux also a good helper for maintenance enginee. Rosin soldering flux paste metal can packaging, High-quality aluminum box packaging, not easy to break..
Check StockSolder Flux (56.6 grms)| flux paste | rosin solder | electrical flux paste | solder paste no clean | flux paste for soldering | rosen flux paste | solder flux electrical | flux paste for electronics
- [Enought Quantity] : This rosin solder flux comes in 1 jar of 56 grams of soldering flux..
- [Non Corrosive]: This non acid flux is not conductive in dry conditions and has good insulation. Is not corrosive to metal substances such as circuit boards..
- [Oxidation Resistance] : This solder flux for electronics Anti-oxidation effect on soldering iron head of gold-copper alloy substrate. Solder flux for semi-solid, not easy to dump or waste..
- [Strong Capability]: This rosin paste flux is suitable for welding instruments, gold, copper, tin, iron and other metals. Ideal for electronic welding, repair and rework..
Check Stock100PCS-Flux Core Welding Wire for Aluminum,Low Temperature Flux Cored Welding Rod Make Repair Aluminum Radiator,Ideal for Both Beginners And Professionals Alike,752°F(400°C) Melting Point.(13"/1.6mm)
- Simplified welding process: Flux-cored rods have a low melting point and do not require solder powder, making them easy to use even for beginners..
- High-quality aluminum brazing: The aluminum brazing rods come with flux already included, ensuring a durable and long-lasting bond..
- Only for Welding Aluminum - 100Pcs(13"/1.6mm)Flux Core Welding Wire are Suitable for Welding or Surfacing Welding Aluminum, Aluminum Alloy, Aluminum-Magnesium Alloy and Other White Metals,752°F(400°C )Melting Point..
- Flux Cored Aluminum Welding Rod Make Repair Aluminum Radiator Easily: Flux Core Welding Wire is Commonly Used for Repairing Aluminum Radiators in Automobiles, Motorcycles, Air Conditioners, and Refrigerators, Making it A Versatile Tool to Have In Your Toolbox..
Check Stock