Reviews Linux compatible Board
Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable for Arduino
- ...ATN, GND on one top, power and ground on the other)..
- Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version..
Check StockWayPonDEV Banana PI BPI M2+ (M2 Plus) Allwinner H3 Quad Core Single Board Computer Supports Raspbian and Android, Ubuntu Linux
- Banana PI BPI-M2+ is the open source hardware platform,Banana PI BPI-M2+ is an quad core version of Banana Pi,it support WIFI on board. use Alliwnner H3 chip on board. and mini size only 65mm*5mm.
- Connectivity: SDIO wifi & BT4.0 module on board, also supports 10/100/1000 Ethernet.
- 4K Display Support: It supports 1080P high-definition video output and 4K support.
- Operating System: Banana Pi BPI-M2+ runs on Android, Debian Linux, Ubuntu Linux, Raspberry Pi Image (Raspbian) and other images..
- Wiki: https://wiki.banana-pi.org/Banana_Pi_BPI-M2%2B. If you have any questions, please post them on our forum: https://forum.youyeetoo.com/.
Check StockSVPRO 5MP USB Camera Module, Wide Angle 170 Degree Fisheye Mini Camera Board Aptina CMOS Sensor USB Camera Module UVC Support Windows Android Linux Mac for Robot/Research/Medical/Industry
- ...nary equipment,all-in-one machine,robot,scanner,industrial machine,medical auxiliary equipment....
- "【Plug & Play 】Drive-free usb camera is very easy to use, just need to plug the webcam to USB port, no need to download or install any drivers. High speed USB 2.0 usb camera also support OTG protocol(UVC).".
- 【High Compatiable】5MP hd usb camera compatible with Windows WinXP/Vista/Win7/Win8 Linux with UVC(above linux-2.6.26) MAC-OS X 10.4.8 or later Android 4.0 or above with UVC. Can run on free software - Yawcam / ContaCam.
Check StockBEYIMEI PCI-E 1 to 6 Riser Card,PCI-E 1X to External 6 PCI-E USB 3.0 Adapter Multiplier Card,PCIE Riser Card for Bitcoin Mining
- ⭐【Strong scalability】: PCI-E 1 to 6 USB multiplier card, 1 interface can be expanded to 6 PCIE ports, effectively solving the problem of lack of PCI-E interface on the motherboard..
- ⭐【Note】: The 6 USB ports are PCI-E signals, do not plug in USB devices, otherwise the USB devices and adapter cards will be damaged..
- ⭐【Efficient】: A cable is directly connected to the interface, effectively reducing interface interference, ensuring data reliability, and improving work efficiency!.
- ⭐【High stability】: The main control board adopts the PCI-E interface for direct power supply, no external power cord is required, so that the main control board is not interfered by the outside world and has higher stability!.
- ⭐【Compatibility】: Compatible with PCIE 4X/ 8X/ 16X. System support: Linux/ Win7/ Win8/ Win10/ Win11.
Check StockSD SDHC SDXC MMC to 3.5' 40Pin Male IDE Adapter Card SD Memory Card to IDE Hard Disk Drive Adapter
- SD to 3.5" 40Pin IDE Adapter,Convert SD, SDHC, MMC to an IDE-compatible hard drive.Support PIO, multi-word DMA and super DMA data transmission mode. high-temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error.Ideal for some devices that required a fast and easy bootable device such as POS..
- Enables IT engineers and embedded technology enthusiasts to use SD/MMC card as a normal IDE 3.5" hard disk.Provides an alternative for data storage and transfer or test for mainboard, sound card, display card and memory card, etc..
- Compatible with SD Memory Card specification 1.1, MMC specification 2.0, SDHC Memory Card. SD socket support maximum 32GB SDHC card Support PIO, Multi-Word DMA and Ultra DMA data transfer mode. Compatible with DOS, Windows 98SE, Me, 2000, XP and Vista & Linux. Bootable, install OS and application on SD card..
- Easy installation and no driver required.Mini board design and no space wasted. Ompatible with MMC system specification 2.0 , SD Memory Card specification 1.0, SDHC Memory Card..
- Attention: Some of the mother board required to enable LBA mode and disable DMA transfer mode..
Check StockKali Linux Compatible Dual Band WiFi Sniffer & Packet Injection Based on RT5572
- Support Windows/Linux/MAC OSX/Raspberry Pi/OpenWRT routers etc..
- 2T2R MIMO 300Mbps 802.11 a/b/g/n high speed USB WIFI Adapter with Monitoring mode an Soft-Ap functin.
- 20MHz/40MHz bandwidth, Multiple BSSID, Built-in on board PCB antennas..
- Compatible with Aircrack-ng, OpenPcap 802.11 wifi packet sniffing program.
- Dimentions: 65.75*22.8*8.5mm, Weight: 13g/ 0.0288 lb/ 0.45 oz.
Check StockUSECL IDE/PATA 40Pin Disk to SATA Female Converter Adapter PCBA for Desktop & 3.5″ Hard Disk Drive Converter Port
- 3.5 inch IDE/PATA 40Pin HDD Drive to SATA converter Board Works, Compatible with all IDE/PATA 40 Pin Drives up to 1000GB..
- Supports IDE 66/100/133MB/s No need for an extra power supply..
- No driver needed, plug and play, unit is not hot swappable..
- Adapter is good for up grading an old computer with 3.5 inch IDE HDD to a new 3.5 inch SATA HDD or SSD disk drive..
- Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux..
Check StockThe Complete Country Guitar Method Compilation: Three Books in One! - Master Country Guitar Licks, Techniques & Soloing (Learn How to Play Country Guitar)
- ...ATN, GND on one top, power and ground on the other)..
- Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version..
Check StockCoral USB Accelerator
- A USB accessory that brings machine learning inferencing to existing systems. Works with Raspberry Pi and other Linux systems.
- Performs high-speed ML inferencing: the on-board edge TPU Coprocessor is capable of performing 4 trillion operations (tera-operations) per second (tops), using 0.5 watts for each tops (2 tops per watt). For example, it can execute state-of-the-art mobile vision models such as mobilenet V2 AT 400 FPS, in a power efficient manner.
- Works with Debian Linux: connects to any debian-based Linux system with an included USB 3.0 Type-C cable.
- Supports tensorflow Lite: no need to build models from the ground up. Tensorflow Lite models can be compiled to run on the edge TPE.
- Supports automl vision edge: easily build and deploy fast, high-accuracy custom image classification models to your device with automl vision edge.
- Ml Accelerator: Google edge TPU Coprocessor.
- Dimensions: 65 millimeter x 30 millimeter.
Check StockAmazon Essentials Men's Slim-Fit 5-Pocket Comfort Stretch Chino Pant (Previously Goodthreads), Stone, 32W x 30L
- ...ar Limited Manufacturer Guarantee. For non-electronic devices, they have included 1 Year Guarantee. That being said, within 30 days of delivery, you can reach out to Amazon for their 30-day return policy. If you are outside this time, you can reach out to Glorious Gaming..
- Compatibility: The GMMK 2 is compatible with Windows, Mac iOS, Linux, PS4, and Xbox. USB-A port is necessary to connect the device. Glorious mechanical keyboards are compatible with any gaming mouse including Logitech PRO, Razer Mamba Elite, SteelSeries, Corsair, ASUS ROG, Microsoft Ergonomic, and more..
- Ultimate Custom Build - Since the board comes with no keycaps nor switches, you are free to pick your preference. Combine the Barebones board with the Glorious switch tester sample pack to discover if you prefer silent linear, clicky, or tactile switches. Pair with a colorful USB-C coiled cable, top mounting plate frame, and other PC gaming setup accessories..
- For professional gamers and keyboard enthusiasts, whether you prefer “thocky” (thocc) or “clacky” sound, the GMMK PRO Barebones is ideal for customizing and modding. The compact board has al....
Check Stock