Reviews Light Weight Insulating Firebrick

6 Pieces Insulating Fire Brick for Kilns,Ovens,Forges,Metal Clay Firing,Fire Pit Accessories for Heater, Fireplaces,Jewelry Soldering,Size:9'X4.5'X2.5'

Good Quality and Low Price: You can get 6 pcs high-performance high-quality HTINXED insulating fire bricks at a lower price. These Insulating fire bricks are made of refractory clay, alumina and silica mixed materials. They have a porous structure. The insulation value is 2462°F/1350°C. It has strong insulation performance, high temperature resistance, low heat storage, and can achieve rapid heating, shorten the heating time, save energy and cost..
Easy to Install: HTINXED Insulating fire bricks have low density, light weight, and can be easily moved and cut. The dimensions of each insulating fire bricks are: 9" x 4.5" x 2.5" and the weight is 1.7KG. You can cut into various sizes to match your equipment accurately, allowing you to obtain a closer fire resistance effect..
Wide Range of Uses: HTINXED Insulating fire bricks are suitable for various household and industrial uses, such as oven, pizza oven, wooden fire oven, wall stove insulation, outdoor oven, outdoor kitchen, outdoor barbeque, kiln repair, jewelry welding, clay pottery firing, various electric furnace linings, and glass melting, metal smelting, refining vessels, heaters etc..
Double protection: Tightly packed and not easily broken. Our packaging box for Insulating fire bricks is customiz....

INTERIOR DIMENSIONS (WxHxD): 5.8” x 5.8” x 24” (145mm x 145mm x 600mm). WEIGHT: 32lb / 15kg. TEMPERATURE: 2500°F / 1370°C.
INSULATION: the interior of the forge is fully lined with 1” of the ceramic blanket. The forge bottom is made of firebrick, providing superior strength and durability.
FITTING: POL CGA-510. Our unit is ready to use in the U.S.A. Works with a standard propane tank.
THE FORGE BODY IS MADE OF: steel 16 gauge (1.5mm). GAS PRESSURE REGULATOR, gauge with Mpa monometer. Pressure Range 0-0.6Mpa (0.1Mpa - 1Bar - 14.5PSI).
PACKAGE INCLUDES: Gas Propane Forge Model: DFPROF3+2D with 2 doors, 3 connected DFP burners, Tongs, Firebrick, 2 Door handles, Gas pressure regulator with manometer, 6.5ft / 2m gas hose, 2 Clamps, Refractory rigidizer powder, Brush, User manual, Heat Resistant Gloves (the appearance of the gloves may vary).

Perfect for repairing small chips or cracked firebrick, re-pointing mortar joints between firebricks, and bonding firebricks together.
Sets as hard and as strong as firebrick after curing.
Approximate Coverage: 99 feet with 1/8" bead..

Non-combustible silicate cement used for patching chipped firebrick in fireplaces and sealing.
A non-combustible silicate cement for applications in wood-frame construction where an ASTM E136 sealant is required..
Adheres firmly to the firebrick when wet or dry. Sets rock hard when fired.
Use to tuck point between firebricks and to repair broken firebricks.

Non-combustible silicate cement used for patching chipped firebrick in fireplaces and sealing.
Used for applications in wood frame construction where an ASTM E136 non-combustible sealant.
Adheres firmly to the firebrick when wet or dry. Sets rock hard when fired.
Use to tuck point between firebricks and to repair broken firebricks.
It has been tested in accordance with ASTM E136 and withstands temperatures up to 2,000° F.

GIRtech USM – chamotte firebrick has improved thermal conductivity compared to traditional chamotte products..
Firebrick can be used in any type of domestic heating units, such as brick fireplaces, steel furnaces, heating stoves, barbecues and barbecue complexes, ceramics kilns and blacksmith forge..
It can be used both for arranging the hearth of the furnace and for lining the inner surface of the furnace..
Could be cutted or processed with a special tool if necessary..

The split-head hammer does the work of six different hammers because the face can be easily changed.
The base hammer has been the leading refractory hammer for decades.
Used for installation and demolition of coke ovens, blast furnaces, and other applications where refractory brick (firebrick) is being installed or removed.

Lightweight and Breathable - The GripGrab Light Leg Warmers convince with their low weight and high breathability.
Ideal when you cycle in spring, autumn and on cold summer days.
Anti-Slip - Reliable silicone grippers on the top hem keep these lightly insulating warmers in place when you are out riding your road bike, MTB, CX or gravel bicycle.
Avoid Sunburn - These leg-warmers feature SPF 50+ and are your UV protection when cycling in the summer sun.
UV rays can be harmful to your skin so it's better to be protected against sunburn.
Be Seen - Increasing your visibility in traffic, these comfortable cycling warmers with maximum freedom of movement include reflective details which brighten up when they're hit by light.
Cozy Comfort - The low weight, soft and breathable, insulating fabric and the ergonomic cut of these anti-slip bicycling warmers gives them an outstandingly comfortable feel on your skin.

The Iguana is powered with reliable extra heavy-duty elements. This results in long element life, because the elements do not “struggle” to reach high temperatures. 10,800 watts heat the 18” wide, 18” deep, 22 ½” high interior to a full cone 10..
The Iguana is easy on the back muscles. With the 22” stand, the interior floor height is a comfortable 34 ½”..
Potters and ceramists who struggle with top-loading kilns will enjoy the Iguana. The door swings open 160 degrees on a heavy ½” steel rod with sealed bearings. A spring-loaded latch presses the door tightly closed. A recessed firebrick lip around the door seals in heat..
Industrial-gauge elements are seated and protected in dropped, recessed firebrick grooves. The elements are easy to replace, because you can comfortably reach into the kiln. For your peace of mind, the Iguana includes a safety switch that shuts off power to the controller when not in use. The ventilated switch box is generously louvered for air circulation for the long life of the electrical components. Yet dust is kept to a minimum..