Reviews Lift Pump For Duramax

Shorty's Skate Tool The Wench

  • Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
  • Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
  • Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
  • 36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..
Check Stock

EWK 36mm 3/4 Inch Flywheel Locking Holder Water Pump Holding Tool 12 Pt Socket for Duramax 6.6L Engine

  • 【 Exclusive Design 】The set is designed for quick water pump replacement. Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
  • 【 Time Saver 】Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Easy to install and effectively keep the flywheel from turning..
  • 【 Easy to Use 】 Locks the flywheel easily to the transmission when changing water pump. The flywheel locking tools work with Duramax 2500 / 3500 pickups and 4500 / 5500 trucks..
  • 【 Heavy Duty 】Comes with flywheel holder OEM no.AM-J-44643-A, AM-J-44643-B, and 36 mm 12 point socket. Constructed of quality CR-V Steel with a manganese phosphate coating to resist rust and corrosion..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
Check Stock

Bolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine

  • Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
  • Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
Check Stock

Fleece Performance Emissions Compliant CP3 Conversion Kit & Pump FPE-LML-CP3-FF-EO Compatible with 2011-2016 Chevy Silverado/GMC Sierra 2500HD 3500HD 6.6L LML Duramax Diesel

  • Convert your 2011-2016 Duramax feet s fuel system from a CP4 to a CP3 high pressure pump and get performance and peace-of-mind. Since its introduction, the CP4 has proven to be less reliable and less capable than the CP3 used in previous Duramax platforms. Our newest kit includes all of the hardware necessary to replace the troublesome CP4 with a CP3 and requires no tuning changes and maintains all factory emissions controls..
  • CP3 Pump Billet CP3 Engine Block Adaptor High Pressure Fuel Rail Line Low Pressure Fuel Feed Line Return Fuel Hose.
  • CP3 Feed Hose Fuel Rail Nut (3) CP3 Block Adapter Bolts (Flange Head, M8x1.25x35mm).
  • CP3 Pump Fittings 3/8 inch CP3 Pump Fittings 1/2 inch (2) 12mm Sealing Washers.
Check Stock

Lisle 22110 Flywheel Lock

  • Locks flywheel in place when removing harmonic balancer on 6.6L Duramax Engines with Allison automatic transmissions.
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • On 2500 and 3500 pickups, remove metal spring-loaded inspection plate on the bottom of the transmission.
  • For more information check the main Lisle tool- 22100.
Check Stock

Lisle 22100 Flywheel Locking Tool for 6.6L Duramax

  • Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions.
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
  • Package dimension is 4.5 inches width by 5 inches height by 2 inches depth.
Check Stock

Xsplendor XSP Replacement Battery SCP-43LBPS 5AAXBT048GEA MN Duramax E4210 E4225 E4277 DuraCore DuraXT E4255 Duramax E4255 1450mAh

  • REPLACEMENT BATERY E4210, DuraMax E4210, E4277, DuraCore E4210, E4225, DuraMax E4277, DuraMax E4225, DuraPro E4277, DuraXT, DuraCore, DuraMax, DuraMax....
Check Stock

GM-ALO-37-All The Lights On Module for GM, Compatible With 2003-2007 Chevy Silverado GMC Sierra 1500/2500/3500 Classic Models

  • Brighten up your driving experience with this simple upgrade inside your fuse box. Simply install the lighting system control module for vehicles to allow your high-beams, low-beams and fog lamps to simultaneously illuminate the road ahead..
  • Once installed the lighting system control module for vehicles will turn on the high-beams, low beams and fog lamps when you turn on your high-beams. When the high-beams are NOT turned on your low-beams and fog lights will function normally..
  • Perfect to see better at night, installation in just 1 minute job and make all you lights turn on. Suitable for use in dark suburban roads, foggy weather, heavy rain and other harsh environments..
  • Application: 2003 – 2007 GM Classic Full Size Truck platforms including – Silverado 1500/2500/3500, sierra 1500/2500/3500. 2003 – 2006 GM Classic Full Size SUV platforms including – Avalanche/Suburban/Tahoe..
  • Applicable to: 2003 GM Silverado/Sierra 2500/3500 6.6L LB7 Duramax. 2004 GM Silverado/Sierra 2500/3500 6.6L LB7 Duramax. 2004.5 GM Silverado/Sierra 2500/3500 6.6L LLY Duramax. 2005 GM Silverado/Sierra 2500/3500 6.6L LLY Duramax. 2006 GM Silverado/Sierra 2500/3500 6.6L LLY/LBZ Duramax. 2007 GM Silverado/Sierra 2500/3500 6.6L LLY/LBZ Duramax (classic body style)..
Check Stock

Camshaft Locking Timing Tool Replacement for GM Dodge Chrysler Holden Colorado Compatible with Jeep Cherokee Wrangler 2.8L Diesel Duramax Engine VM 9991 VM 9992 EN-50029 EN-50030 EN-51025 EN-51104

  • ◇ Function: Used to lock camshafts and crankshaft in position when setting engine timing. include EN-51104 diesel pump locking tool, fits over the sprocket and engages the teeth as a means to hold the sprocket in position when removing or installing the retaining nut.
  • ◇ The locking tool fits the reluctor on one end, and bolts to the cylinder head face on the other to hold the camshaft in position to set base engine timing.
  • ◇ Fit Engine: VM64C / ENS / 49C / 50C / VM10D / VM11D / LWN / LWH (Duramax).
  • ◇ Application Vehicle: Compatible with Jeep/Chrysler 2.8L Diesel Duramax engines, compatible with Jeep Cherokee 2008-2011.
  • compatible with Jeep Wrangler 2007 onward.
  • compatible with Chrysler Grand Voyager 2008 onward.
  • compatible with Holden Colorado 2012 Onward / Trailblazer.
Check Stock

Fuel Filter with Head Assembly and Sensor - Compatible with Chevy and GMC Trucks - 6.6L Silverado 2500 HD, Classic, Sierra, HD, 3500 Classic with Duramax - Replaces TP3018, 904-517, 12642623, 12639448

  • ...esired substances that are not filtered may cause rapid wear of the fuel pump, injectors and worse if contaminated with water will cause them to fail. These filters needs to be changed regularly to maintain desirable performance and efficient fuel economy..
  • Compatible Replacement for Chevrolet & GMC Trucks With 6.6L Duramax Engines - 2004 - 2012 Silverado 2500 HD | 2007 Silverado 2500 HD Classic | 2004 - 2006 Silverado 3500 | 2007 Silverado 3500 Classic | 2007 - 2012 Silverado 3500 HD | 2004 - 2012 Sierra 2500 HD | 2007 Sierra 2500 HD Classic | 2004 - 2006 Sierra 3500 | 2007 Sierra 3500 Classic | 2007 - 2012 Sierra 3500 HD |..
  • Replaces Part# 12642623, 12639448, TP3018, 904-517, 904517 commonly found on the popular 6.6L Duramax Silverado and Sierra trucks including year models 04, 05, 06, 07, 08, 09, 10, 11, 12. The fuel filter can easily be located on the passenger side of the truck beside the engine. It includes the head with primer pump and bleeder screw, a new fuel filter water separator and the water in fuel sensor..
  • OEM Fit, Quality, Finish - While this is NOT a genuine OEM part, it is a direct replacement manufactured by AA Ignition. If your vehicle is hard to start, losing power, has a Check Engine Light (CEL) or the factory fuel filter head is d....
Check Stock