Reviews Lga1intel Motherboard Mini Atx

Cougar Middle Tower Cases MX330-X

Motherboard support: Mini ITX/ Micro ATX/ATX.
USB3.0 x 1/ USB2.0 x 1/ mic x 1/ Audio x 1/ fan controller/ quick charging for mobile phone.

Combining innovative cable management, concentrated airflow, and proven CORSAIR build quality, the 4000D is a fitting choice for an immaculate high-performance PC..
The CORSAIR RapidRoute cable management system makes it simple and fast to route your major cables through a single channel, with a roomy 25mm of space behind the motherboard for all of your cables..
Includes two CORSAIR 120mm AirGuide fans, utilizing anti-vortex vanes to concentrate airflow and enhance cooling. Motherboard will fit in our 4000 Series cases without any issue. Mini-ITX, micro-ATX, ATX, and E-ATX form factor motherboards are all supported..
A spacious interior fits up to 6x 120mm or 4x 140mm cooling fans, along with multiple radiators including 360mm in front and 280mm in the roof (dependent on RAM height)..
Put modern connections within easy reach with a front I/O panel including a USB 3.1 Type-C Port, USB 3.0 port, and a combination audio/microphone jack..

『24P – mini 24P』24 Pin end to plug into the standard 24 pin ATX Power Supply, mini 24 Pin end to plug into DELL motherboard.
『Solution』Allowing you to convert standard 24 pin ATX power supply to mini 24 pin power supply connector.
『Parameter』Gauge: 1007-20AWG (standard tin-coating copper wire), Length: 3.94inches(10cm), Maximum power: 1000 watts, Quantity: 1pcs, Self-adhesive tape*1pcs.
『Compatibility』Compatible with DELL Optiplex 380 / 580 / 760 / 780 / 960 / 980.
『Note』Work on Dell Optiplex power supply / MB( May not work on optiplex 980 MT/SMT ( mini tower or small mini tower ) series as it uses a different power supply set up.). If you connect it with other incompatible motherboards, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it.

Combining innovative cable management, concentrated airflow, and proven CORSAIR build quality, the 4000D is a fitting choice for an immaculate high-performance PC..
The CORSAIR RapidRoute cable management system makes it simple and fast to route your major cables through a single channel, with a roomy 25mm of space behind the motherboard for all of your cables..
Includes two CORSAIR 120mm AirGuide fans, utilizing anti-vortex vanes to concentrate airflow and enhance cooling. Motherboard will fit in our 4000 Series cases without any issue. Mini-ITX, micro-ATX, ATX, and E-ATX form factor motherboards are all supported..
A spacious interior fits up to 6x 120mm or 4x 140mm cooling fans, along with multiple radiators including 360mm in front and 280mm in the roof (dependent on RAM height)..
Put modern connections within easy reach with a front I/O panel including a USB 3.1 Type-C Port, USB 3.0 port, and a combination audio/microphone jack..

Form factor: Tower, USB 2.0 Ports: 1 , USB 3.X Ports: 2, Audio 3.5 mm Port: 1 , Microphone 3.5 mm Port: 1.
Motherboard Support: E-ATX, ATX, Micro ATX, Mini ITX Dust Filter: bottom removable, top magnetic.
Max GPU Length: 14.56 inches , Max. CPU Cooler Heigth: 6.29 inches.
Fans: 3* Front, 1* Rear , 2* Top , 3* Bottom (4.72 inches).
Drive bays (internal): 2* combined / 3* 2.5 ".

Compatible: work with motherboard with ATX 4 pin, 8 pin or 8+4 pin ports.
Connector A: EPS 12V 8 Pin CPU Female Connector. Connector B: ATX 12V 8 Pin (4+4 Detachable) Male Connector. Connector C: ATX 12V 4 Pin Male Connector.
Length: 10.6inch/27cm, UL1007 18AWG, 34*0.178TS Tinned Copper Wire, Higher Quality than Regular Cable.
Solution: The CPU 8 Pin Female to CPU 8 Pin (4+4) +4 Pin Male Cables provide a good solution for the motherboard required 8+4 pin ATX ports,Compatibility: Compatible with all PSUs - ATX, SFX, Fanless PSU.Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket..
This cable only works with motherboard, not PCI-Express video cards. Serious damage can be caused if your use it in place of PCI-Express video cards..
Package: 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male CPU Power Adapter (10.6in).

Cube ATX PC Case with Dual Chamber design for better airflow and cable management..
5mm Tempered Glass side and front panel , 70% transmittance to show off the system on the side panel , USB2.0x 2, USB3.0x2.
Motherboard Support E-AT, ATX, m-ATX, mini-ITX , Support Vertical Graphic card. Removable Dust filters in the front, top and bottom included.
Radiator Support 240/280 mm in the top and front side. Graphic Card Length Max Support 330 mm /13 inches , CPU Cooler Max height 168mm / 6.6 inches.
Easy to use : the fan hub allow you to control the fan speed and LED mode by remote control or connect to the motherboard, control the fan speed by PWM and light by ASUS Aura Sync (ARGB) , MSI Mystic Light Sync (J-Rainbow) and GIGABYTE RGB Fusion / Fusion 2.0 (5V addressable 3pins header on motherboard)..

Mini 6 Pin port connects to Dell motherboard,15 Pin SATA port connects to hard drive.
Connector A: ATX 12V mini 6 pin, Connector B: 2x SATA 15 pin.
This cable is only designed for SSD hard disk CD-ROM 12-inch..
Length(including connectors): 12 + 6 inches(30 + 15cm)(approx), with Braided Sleeves for easy cable management.
Compatible with DELL Inspiron series such as: 3653 3650 3655 3250 3252 3268 3660 3667 3668.
Do not support: DELL OptiPlex series such as 3020 3046 5040 7020 7040 9020 SFF T1700.
NOTE: ATX connector is mini 6 pin , not standard 6 pin..

Motherboard Support :HPTX .XL-ATX E-ATX (12" x13"EEB), ATX, m-ATX, mini-ITX. (System is not included).
Efficient Cooling Solution: Five pre-installed fans, including four 120 mm RGB LED Fans in the Front and one 120mm RGB Fan in the Rear provides great....
Extreme Roomy Internal Space: Graphics Card Length: 530 mm / 20.8 inches, CPU Cooler Height: 190 mm / 7.4 inches ,Radiator Support :....
Tempered Glass Design: Three High quality 5 mm thickness tempered glass panels on the front, and sides of the case. Connectivity: USB 3.0 x 2, USB 2.0....
Easy to use and RGB Ready : the fan hub allow you to control the fan speed and LED mode by remote control, or connect to the motherboard, control the....