Reviews Lexia3 For Citroen Peugeot

KUNTEC 21 Piece O2 Sensor Socket Set Universal Oxygen Sensor Removal Install Tool Set

Oxygen Sensor Socket is designed for the removal and installation of oxygen sensors, injectors and thermal switches.
Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.
7/8inches Short low Profile O2 Oxygen Sensor Socket, 7/8inches Universal Oxygen Sensor Socket.
Universal fit for Audi, BMW, Citroen, Mercedes, Ford,Peugeot, Renault, Skoda,OPEL, Volkswagen and so on.
O2 Oxygen Sensor Socket is constructed from chrome-vanadium steel (CR-V) for extra strength and longevity, protect them from rusting.

Highly effective additive that reduces the build-up of particulates and thus increases the service life of the diesel particle filter.
Suitable for diesel vehicles with diesel particle filters, provided these have not already been equipped with an electronically controlled additive tank system for filter regeneration (as used by Citroen and Peugeot, for example).
Add the diesel particle filter protector to the fuel immediately before filling up after every 2,000 km.
The container is sufficient for 50 -70 litres of diesel fuel.
Note: Avoid excess dosage and use in combination with diesel soot guard!.
Ensures optimum combustion of the fuel, reduces soot formation, lowers emissions and extends the service life of diesel particulate filters.
Vehicles used for short trips and city traffic are especially affected by clogged diesel particulate filters.

COMPATIBLE WITH: Audi, BMW, Cadillac, Chevrolet, Citroen, Ford, Fiat, Kia, Land Rover, Mercedes, Nissan, Opel, Peugeot, Renault, Seat, Skoda, VW and more. Please check the dimensions before purchasing.
SIZE: Measures 3.3 x 3.7 inches (8.4x9.3 cm).
PROTECTS: Protects the paint work on your car from being scratched when opening the door.
EASY TO INSTALL: The TPU covers for your car door handle divot are quick and easy to install.
HIDDEN: These matte transparent covers are designed to be as inconspicuous as possible when in place.

High quality: Precision manufactured steel bushes with chemically blackened finish, durable and sturdy..
Quick selection: Laser-etched sizing to make recognition of the correct size tool quick and easy..
Multifunctional: For fast accurate alignment of flywheel pilot hole and clutch drive plate when assembling to car..
Scope of application: It is suitable for use on most cars and light commercial vehicles, like Audi, Citroen, Fiat Ford, Honda, Mitsubishi, Nissan, Opel, Peugeot, Rover, Saab, Toyota, VW, Volvo..
Package included: Come with a alignment tool shaft, 8pcs pilot Bearing adaptors and 8pcs Clutch Plate adaptorrs..

Comes with strut spreader tool with 5.5 x 8 mm and 5 x 7 mm. 1/2" Drive.
2 piece strut spreader is designed to expand the spring strut and ball joint mounting to separate the spring strut from the wheel bearing housing..
The strut spreader sockets are made with S2 steel for maximum strength and durability, and to resist rotational distortion..
The strut spreader sockets are featured an oval shaped head. This design makes it easier to rotate the strut tool in the strut channel..
Compatible with Audi, BMW, Citroen, Ford, Peugeot, Renault, Seat, Skoda, VW and Japanese vehicles.

Suggestion Fitment for: The cap is universal fit for the same inner diameter washer fluid reservoir cap. we suggest to use for Ford Focus, Citroen C5 C6, for Peugeot 407 3008 5008. Please make sure your car model before ordering..
Cap Size - Cap Inner Diameter 52.5mm/ 2.07 inch..
Usage - High-quality replacement cap for windscreen washer system washer reservoir..
NOTE - Please confirm that the diameter of your car washer bottle cap is similar with this product before purchase (The error of the diameter is 1-3mm)..

114 PCS are ideal for repairing sump, gearbox and differential drain plug threads..
Compatible Vehicle: For Audi, VW, BMW, Citroen, Fiat, Ford, Seat, Honda, Mazda, Mitsubishi, Opel, Peugeot, Renault, Toyota and Volvo.
This Set Includes: 6 x TAPS: M13 x 1.25P / M13 x 1.5P / M15 x 1.5P / M17 x 1.5P / M20 x 1.5P / M22 x 1.5P.
36 x Oil Drain Plugs: M13 x 1.25 (x6), M13....
Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer.
This kit provides new enlarged thread and replacement drain plug screws.

✅【2023 NEWEST UPDATeS】Autel MaxiPRO MP808BT has been added with ECU Coding in its 1st Jun updates. MP808BT supports reflash hidden functions & VAG Guided Functions for Audi, VW, Skoda cars, and perform Offline Coding for Chrysler, Bugatti, Lamborghini, LT3, Seat, Peugeot, Citroen, Opel, Vauxhall, Porsche and etc. Autel MP808BT now supports FCA cars after 2018. ECU Coding is only for a few cars, please send VIN# to.

8MILELAKE Tester helps detect internal and external leaks Perfect for head gasket failure detection (which side of block or which cylinder leaks). 8MILELAKE never authorized other sellers to sell except freebird trading..
Thumb-operated relief valve for quick and easy pressure release and self-locking quick-disconnecting components..
Locate system leaks from: Head gasket. Header tank. Radiator and heater cores. Water pump plugs, hoses and housings..
Quick-release couplings and a high-powered pump with large, easy-to-read dial are featured in this kit and the kit is packed in a large blow molded case which is supplied with operating instructions..
cooling system pressure testing kit with an updated selection of adaptors to fit popular European and Japanese vehicles including Alfa, Audi, BMW, Benz, Chrysler, Citroen, Ford, Honda, Mazda, Mercedes, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Suzuki, Toyota, Volvo, VW. Also includes non-specific adaptors for other makes and models. Comes with 8MILELAKE brand on the case..

28pcs BELEY universal radiator pressure tester and vacuum type cooling system kit make it easy to test leaks in radiator system and quickly change coolant..
17pcs color coded radiator test caps make it easier to identify when choosing the suitable test cap. Test Caps for testing cooling systems on most car..
Univesal fit for most vehicles: Acura, Mercedes, Benz, GM, Jeep, Peugeot, Subaru, Chrysler, Mitsubishi, Nissan, Mazda, Toyota, Infiniti, Geo, Suzuki, Isuzu, Honda, Acura, Lexus, Volvo, Saab, Citroen, Renault, Fiat, Alfa, Mini Copper, VW, BMW, Ford, Opel, Porsche, Audi, etc..
Special design of vacuum purge refill tool connection, helps you to refill the vehicle cooling system and remove air pockets, test range 0-35 psi..
Durable exact size of nylon testing caps, rust-proof copper connectors, clear gauge reading, high-quality rubber and metal adapters. All in one carring case, convenient to store. BELEY OFFICIAL offers 2year 100% satisfying after-sales services..