Reviews Leveler Legs

TasuoX M6 Screw in Adjustable Furniture Levelers - Galvanized Steel Threaded Furniture Leveling Feet - 30 Pack Furniture Feet for Table Chair Cabinet Patio Furniture Legs

  • M6 LEVELER SIZE - Please confirm the correct leveler size before purchasing, M6 thread is a common size for furniture legs made in China (18 mm shaft....
  • MULTIPLE USES - Patio furniture feet avoid direct contact of furniture legs with the floor, reduce friction and noise, and keep floors, tiles or....
  • STURDY MATERIALS - Furniture feet are made of high-quality hard plastic base and galvanized screws, the base is non-slip and durable, will not scratch....
  • EASY TO INSTALL - Use a power drill to drill a hole in the chair and table leg that needs to be leveled, then screw the furniture leveler into your....
  • WIDE APPLICATION - These chair levelers screw in are suitable for all types of floors, including wood, laminate, hardwood, tile, and carpet. Widely....
Check Stock

[LOSCHEN] 8PCS Heavy Duty Adjustable Leveling Feet for Furniture,Hexagon Nuts Lock Furniture Legs Levelers,for Table, Cabinets, Workbench,Shelving Units and More

  • ...se are 8heavy gauge, Each plated steel furniture legs can be fine-tuned until they are perfectly level to the height you want. That help you adjust and level your table, cabinets, workbench, shelving units, bookcase and more.Holds Up to 400kg/880 lbs. Made of high quality steel with a 100kg/220 lbs capacity per leg leveler(Real Data)..
  • 【L-SHAPED MOUNTING BRACKET】Wide ledger,allows the mounting bracelet hooks onto the bottom edge of furniture to distribute the weight for better support and stability.Ensures the cabinet load is carried by the leve.
  • 【ADJUSTABLE FURNITURE LEVELER LEGS】The leveling feet have heavy 3/8″-16 (10mm) dia shaft that adjusts height from (2cm)0.78″ to (6cm)2-2/5″. With the wrench lock nut, you don’t have to worry about the bottom will fall off.Free spinning foot design compensates for uneven/ irregular floors. Rubber cap protects the carpet and floor and block moisture from getting to the foot,the floor surface no longer leaves rust spots..
  • 【PROTECTING FURNITURE】May be adjusted to reduce shock, vibration, tilting, and more. Helps with uneven floors.Often used as adjustable feet for workbench and furniture on any uneven surface. Helps Lift furniture and prevent it from getting damp.These heavy duty leveler legs he....
Check Stock

Anwenk Leveling Feet Heavy Duty Furniture Levelers Adjustable Table Leg Leveler w/Lock Nuts for Furniture,Table, Cabinets, Workbench,Shelving Units and More

  • ✔Heavy Duty Leveling Feet- These are 4 heavy gauge, plated steel furniture legs that help you adjust and level your table, cabinets, workbench, shelving units, bookcase and more..
  • ✔Versatile Threaded Legs- The leveling feet have heavy 3/8"-16 (10mm) dia shaft that adjusts height from 0" to 2-1/2". Free spinning foot design compensates for uneven/ irregular floors. Polyethylene cap protects floors and block moisture from getting to the foot..
  • ✔ L-Shaped Mounting Bracket- Ensures the cabinet load is carried by the leveler, Not the screws. The leg leveler has 7/16” wide ledger,allows the mounting bracelet hooks onto the bottom edge of furniture for better support and stability..
  • ✔1320LBs Weight Support- Each leveling leg support 330LBs, 4 legs support total 1320LBs. These heavy duty leg levelers hold up almost all heavy furniture you may have,without worrying about its quality..
  • ✔Hex Wrench for Easy Adjustment- 5mm hex wrench is included to allow micro adjustment on each leg until they are perfectly level to your desired height.Package includes 4x leveling feet, 16 Installation screws , 5mm hex wrench..
Check Stock

Hyever Leveling Screw Leg Heavy Duty Carbon Steel Nickel Plated 4\ Adjustable Feet Leveler for Furniture Mechanical Equipment Pack of 2

  • Total Size: 60mm（2.36") x 60mm（2.36") x 120mm(4.72")(L x W x H).
  • Load Capacity: 1100 lbs per mounts leveler.
  • Moisture-proof and Anti-corrosive: Carbon steel nickel plated base provides excellent corrosion resistance that will do keep the furniture or equipment dry and durable,it can be used as replacement feet install in heavy duty furniture or mechanical equipment.
  • Easy To Install: it can be install in funiture easily,drilling a hole in the bottom of the furniture or equipment first ,and then set the leveler to the level and height you desirable.
  • Application Place: it can be provide support,balance adjustment for mechanical equipment, shelves, assembly line production,heavy duty furniture,etc.
Check Stock

Anwenk Leveling Feet Heavy Duty Furniture Levelers Adjustable Table Leg Leveler w/Lock Nuts for Furniture,Table, Cabinets, Workbench,Shelving Units and More,Black

  • 【Heavy Duty Leveling Feet】- These are 4 heavy gauge, plated steel furniture legs that help you adjust and level your table, cabinets, workbench, shelving units, bookcase and more..
  • 【Versatile Threaded Legs】- The leveling feet have heavy 3/8"-16 (10mm) dia shaft that adjusts height from 0" to 2-1/2". Free spinning foot design compensates for uneven/ irregular floors. Polyethylene cap protects floors and block moisture from getting to the foot..
  • 【L-Shaped Mounting Bracket】- Ensures the cabinet load is carried by the leveler, Not the screws. The leg leveler has 7/16” wide ledger,allows the mounting bracelet hooks onto the bottom edge of furniture for better support and stability..
  • 【1320LBs Weight Support】- Each leveling leg support 330LBs, 4 legs support total 1320LBs. These heavy duty leg levelers hold up almost all heavy furniture you may have,without worrying about its quality..
  • 【Hex Wrench for Easy Adjustment】- 5mm hex wrench is included to allow micro adjustment on each leg until they are perfectly level to your desired height.Package includes 4x leveling feet, 16 Installation screws , 5mm hex wrench..
Check Stock

mopio Norwin Executive Desk Modern Industrial Farmhouse Desks for Home Office with Sturdy Metal Legs Fluted Panel Dual Cabinet Soft Close Door Storage Shelves & Leveler

  • Design: With a mix of iron and oak effect finishing, it creates a contrasting and bold look. The handleless doors also provides a clean and neat look.
  • Flexibility: With two cabinets which conceals adjustable shelves with 3 set heights, and a small open niche, it gives you the flexibility of customizing your storage needs however you like it, with a perfect amount of space .
  • Solid iron legs with leveler: Sturdy and durable for worry-free use. Leveler also provides the extra stability and sturdiness without compromising on aesthetics.
  • Elevated Storage: Ability to have easy cleaning access with the elevated iron sturdy legs.
  • Dimensions: 54 (W) x 18.8 (D) x 30 (H) Inches.
Check Stock

Heavy Duty Leveler Legs w/Lock Nuts - Leveling Feet for Furniture, Cabinets, & Workbench - 4 Pack

  • HEAVY DUTY - Made from 14 ga. (.080") steel. Load capacity is 2,000 lbs. per leg.
  • INTEGRAL LEDGER - Ensures that the load is carried by the leveler, not the screws.
  • LOCK NUTS INCLUDED - An absolute MUST for the workshop or garage, especially if any vibrating machinery is involved..
  • FREE SPINNING FOOT - Compensates for irregular floors. Polyethylene cap protects floors as it keeps moisture away.
  • YOU GET - 4 Legs, 16 Installation screws (#10 x 3/4"), 5mm hex wrenchDescriptionGot a 8,000 lb. workbench that needs leveling?... Read On!.
  • D.H.S. is pleased to offer a leveler that's tough as nails, but as easy to install as it is to adjust..
  • Housings are made from 14 ga. (.080"), zinc plated steel. Each has a 7/16" wide ledger that hooks under the cabinet. This ensures the load gets carried directly on the leveler, not the screws. BTW the screws we provide are no joke. They're 3/4" long #10 Philips head (nickel plated), perfect for supporting a bookcase with plywood sides or a workbench with 4 x 4 legs..
  • The legs have a 10mm dia. (a heavy 3/8") shaft that adjusts from 0" to 2-1/2". The feet are 1-1/4" dia. and spin freely on the threaded shaft. This allows them to tilt if your floor is really bad. Adjustments are easier too, as y....
Check Stock

Mopio Norwin 64 TV Stand for Televisions up to 70 Modern Industrial Farmhouse Entertainment Center TV Console with Storage Shelves Sturdy Metal Legs Sliding Door & Leveler for Living Room Oak

  • Design: With a mix of iron and oak effect finishing, it creates a contrasting and bold look. One TV stand to store 'em all. With a wide width of 64" , now you can display that huge 70" TV in full glory, store your gaming console, sound system and all your entertainment needs.
  • Flexibility: With a smooth sliding door which conceals an adjustable shelves with 3 set heights, and two open niches, it gives you the flexibility of customizing your storage needs however you like it, with a perfect amount of space .
  • Solid iron legs with leveler: Sturdy and durable for worry-free use. Leveler also provides the extra stability and sturdiness without compromising on aesthetics.
  • Elevated Storage: Ability to have easy cleaning access with the elevated iron sturdy legs.
  • Dimensions: 63.9 (W) x 15.3 (D) x 22.7 (H) Inches.
Check Stock

Heavy Duty Adjustable Furniture Leg Leveler w/Lock Hexagon Nuts - 2000 Lbs(Set of 4)

  • Heavy duty-Set of four levelers can holds Up to 2000 Lbs. Leveler Total Height: 3 Inches.Leg Base Diameter: 1-1/4 Inches.2 Inches Height Adjustable..
  • Free spinning foot - inner hexagon spanner for adjust ,Compensates for irregular floors. base with plastic protective cap can protects floors and block any moisture from getting to the foot. No more rust spots left on the floor surface..
  • Multipurpose-It is good for tables, shelving units, cabinets, furniture legs and a whole lot more.And also can be used for outside furniture and perfect for the workshop or garage, especially if vibrating machinery is involved..
  • Easy to adjust- adjust with the included-inner Hex Key Wrench. The unique design of the leg leveler allows for easier access to the adjustment bolt. This will be allows to micro adjust each leg until they are perfectly level to your desired height..
  • You can get 4 Heavy Duty Leg levelers w/lock nuts, 32 Installation screws, one 5mm inner hexagon spanner..
Check Stock

Metal White Table Legs 28''H Furniture Legs,Dining Table Legs,Metal Legs for Desk,Office Table Legs (Without Boards)

  • ✔ Great Size With Strong Capacity- Width 17.7'' x Height 28'', ideal height to sit on .With Strong steel construction for 800lbs capacity yet this table lega doesn't take up too much space from your room..
  • ✔ Durable & Sturdy Construction-This Industrial table legs is constructed by heavy duty solid steel covered with debris-free heavy matte black powder finish. for good condition for years.Sleek and simple in design give it rustic, yet refined style. This good replacement furniture legs will go with all types of wood..
  • ✔ Widly Use-This mid-century modern look metal desk Legs is perfect use as DIY custom coffee Table Legs,dining table legs,kitchen table legs,computer table legs, side table legs, end table legs, console tables,cocktail table legs.Great choice for a variety of family DIY table projects.
  • ✔ Predrilled Holes for Easy Assembly-Pre-drilled holes on the mounting plate you only mount the screws to the wood with an electric drill. The easy installation ensure your DIY table project effortlessly at home..
  • ✔ Adjustable Table Leveler-Great stabilizer even for uneven floor and keep your table stable. It reduces friction & noise while moving furniture and protect your floors from damage..
Check Stock