Reviews Left handed Hss Hex Die

COMOWARE Screw Extractor & Left Hand Drill Bit Set- Broken Bolt Remover HSS M2, 10pcs with Metal Index Case

  • EASY OUT REMOVING: It is more convenient and easy to remove the broken screw from the damaged workpiece by using the left hand drill bit which coordinates with the screw extractor. Spiral groove on screw extractor can go deep into screw to increase grip force to remove studs, screws and bolts around the house, garage or on your job project..
  • HIGH QUALITY CARBIDE MATERIAL: The left hand drill is made of HSS M2. Compared with ordinary high speed steel, M2 material can prolong the service life, enhance wear resistance and remove chippings clearly. HSS are harder and tougher than other materials..
  • UNIQUE DESIGN: The 118°angle makes it easier to cut into the workpiece with small axial resistance. This design can not only increase the length of cutting edge work but also decrease the nominal thickness of cutting layer, which improves heat dissipation and durability with better cutting effect..
  • CONVENIENT ORGANIZATION AND STORAGE: Come with a index case, convenient to use and carry..
  • SET INCLUDING: 5pcs alloy steel screw extractors and 5pcs HSS M2 left hand drill bits. Screw extractor in....
Check Stock

Soda Pilot ~ Women Lug Sole Low Heel Chelsea Fashion Ankle Bootie w/Double Elastic Gore (White, numeric_7)

  • .... And 6-Pieces Screw Extractor: 1#, 2#, 3#, 4#, 5#, 6#..
  • 【MULTI-SPLINE EXTRACTORS AND DRILL BIT KIT SIZE】:10-Pieces Multi-Spline Extractors: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32". 10-Pieces Left Hand HSS Drill Bit: 1/8", 5/32", 3/16, 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 11/32". All these tools are clearly marked..
  • 【LEFT-HAND DRILL BIT SET】:The left-hand drill bits of this extractor set are made of high-speed steel, strong than right-hand drill bits, and not easy to wear. The 135° angle design of the head makes it easier to touch the fasteners and ensures the precise countersinking and hole smooth clean..
  • 【SUPERIOR GRIPPING POWER】:Each lug nut remover is precision designed. The reverse spiral groove of the socket is designed to bite and provide maximum grip. The more you turn, the tighter the socket grips, so it can easily take out stripped, rusted, rounded-off or frozen lug nuts..
  • 【PREMIUM SERVICE】:We are committed to providing every cust....
Check Stock

JEFE HEX 9-Piece Drill Bits Set-1/16\

  • 【Premium HSS Titanium Coating】High speed steel (HSS) with titanium coating gives Jefe Hex drill bit great durability and prolongs 3 times longer life than drill bits without coating..
  • 【Easy Cut Split Point】Jefe Hex Easy Cut Point design makes drilling easy with less pressure and prevents drill bit walking on the working surface. Fully ground modified parabolic flute design clears chips quickly, decreases friction and heat damage. Tapered web provides durability and reduces breakage..
  • 【Quick Change】1/4" (6.4mm) hex shank fits into standard power tools and impact drivers. Jefe Hex drill bit’s solid bonding technology manufacturing eliminates radial runout and improves concentricity. High torque, impact-rated accuracy..
  • 【Applications】 - Jefe Hex drill bit sets are built for general purpose applications, such as DIY projects, home maintenance and MRO (Maintenance, Repair and Operations). Working materials include steel, copper, aluminum, zinc alloy, cast iron, wood and plastics..
  • 【Package & Size】 - 9 pcs drill bit set in a double blister pack with easy opening design. Size range: 1/16.
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to dri....
Check Stock

FTG USA Countersink Drill Bit Set 3 Pc #10 (3/16') Wood Countersink Drill Bit Same Size Set Countersink Tapered Countersink Bit, Quick Change Shank, 1 Hex Wrench, Woodworking Countersink Drill Bits

  • ... with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits.. Wood countersink bit with wider flute shape for increased chip flow. Drill countersink set has logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit with countersink set, drill bits, professional countersink drill bits set with countersinks for wood. FTG2348 counter sinker drill bit for wood.
  • STORAGE CONTAINERS for this set available below on this page at section " Make it a bundle". Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report issued by ANAB US Accredited Lab, confirms that drill bits set High Speed Steel Quality countersink bits meets desired specs of HSS M2 Grade 6542 harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits.
Check Stock

FTG USA Replacement Tapered Countersink Drill Bit Set 3 Pc (#10) 3/16' Countersink Bit Same Size Bit Replacement Only, Countersink Replacement Drill Bit FTG Maximum Torque Wood Bits Secured with Pin

  • ... drill bit sets with tapered countersink bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink replacement drill bits designed as to work as wood drill bits. All same size replacement tapered drill bit for drill countersink.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 drill bit replacement set. Countersink replacement bits set with tapered drill bits. Top Quality 11/64 inch tapered and double flute drill bit.
  • HSS M2 Grade 6542 the most popular High-Speed Steel, for its high toughness, and good cutting edge retention. FTG 2345P countersink replacement drill bit set for drill bits with countersink.
  • STORAGE CONTAINERS for this set available below, at section " Make it a bundle". Replacement counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report issued by ANAB US Accredited Lab, confirms that drill bits set High Speed Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits.
Check Stock

Left Hand Drill Bit Set (10 pc, Silver & Gold), Metal Extractor Bits to Remove Stripped Broken Screws & Bolts w/Iron Storage Case by Mata1

  • HEAVY DUTY REMOVAL SET – These left-handed reverse twist extractors are USA-designed with clean steel technology, HSS strength & high HRC hardness.
  • Suitable for removing hardened, damaged, rusted & painted-over screws or bolts.
  • HARD & TOUGH – The hex shank extraction bits range in diameter from 3/32″ to 5/8″, while the lefthand drill bits range in diameter from 5/64″ to 19/64″ with 118-degree split points for high-speed drilling.
  • CARRY CASE – Ideal tool box to organize & hold the remover drill bits for any craftsman, dad, husband, boyfriend, or wife.
  • DRILL & REMOVE – Select bit size appropriate to the damaged screw/bolt.
  • Insert left-hand drill bit into drill & set drill to reverse.
  • Drill a hole about 1/16” deep into the screw/bolt.
  • Select corresponding extractor & use a mallet/hammer to pound it into the screw/bolt.
  • Use drill, wrench, or tap handle to thread the screw bolt out.
  • HANDY GADGETS – Mata1 is committed to provide lasting quality tools.
  • Mata1 reversible drill bit sets provide an assortment of sizes for removal of stuck bolts & screws.
Check Stock

Utoolmart Hex Rethreading Die, UNC 8-32 Carbon Steel Thread Die, Hex Rethreading Die Machine Thread Die, Hexagon Taper Pipe, 2 Pcs

  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • Hex die is for dressing over bruised or rusty threads.
  • No special holder is required for this type of die, any wrench large enough will suffice.
  • Ideal for maintenance in the shop or field.
  • Included Components: 6 Piece Hex Pipe Dies.
Check Stock

THINKWORK Bolt Extractor Set, 54 Pieces Easy Out Screw Extractor Set, Stripped Lug Nut Remover for Removing Damaged, Frozen, Rusted, Rounded-Off Bolts, Nuts & Screws

  • .... And 6-Pieces Screw Extractor: 1#, 2#, 3#, 4#, 5#, 6#..
  • 【MULTI-SPLINE EXTRACTORS AND DRILL BIT KIT SIZE】:10-Pieces Multi-Spline Extractors: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32". 10-Pieces Left Hand HSS Drill Bit: 1/8", 5/32", 3/16, 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 11/32". All these tools are clearly marked..
  • 【LEFT-HAND DRILL BIT SET】:The left-hand drill bits of this extractor set are made of high-speed steel, strong than right-hand drill bits, and not easy to wear. The 135° angle design of the head makes it easier to touch the fasteners and ensures the precise countersinking and hole smooth clean..
  • 【SUPERIOR GRIPPING POWER】:Each lug nut remover is precision designed. The reverse spiral groove of the socket is designed to bite and provide maximum grip. The more you turn, the tighter the socket grips, so it can easily take out stripped, rusted, rounded-off or frozen lug nuts..
  • 【PREMIUM SERVICE】:We are committed to providing every cust....
Check Stock

FTG USA Countersink Drill Bit Set 6 Pc #10 (3/16') Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • ... with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Drill countersink set has logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit with countersink set, drill bits secured with pin, professional FTG Maximum Torque countersink drill bits set. Packaging set combination unique design protected by US Copyright Office.
  • STORAGE CONTAINERS for this set available below on this page at section " Make it a bundle" Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report issued 4/27/2021 by ANAB US Accredited Lab, confirms that drill bits set High Speed Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits....
Check Stock