Reviews Led Plate Light

ONLTCO 12V Red Led Square Submersible Trailer Lights, Turn Signal License Brake Tail Light Kit for Under 80 Inch Boat Camper RV Trailers Shorelander Marine, IP68 Waterproof, DOT

  • ✅KIT INCLUDE: 2 Pcs Trailer Lights build in with License Plate Light, Turn Signal Light, Tail Light and Stop Light.
  • 2 Pure Copper Wires: Long Wire is 21.75ft, Short Wire is 4.05ft.
  • 1 Pc License Plate Bracket with lengthened mounting holes makes adjustable when installing license plate and a bag of mounting hardware.
  • ✅COMPLETE SUBMERSIBLE: We sank the light into the lake under 65ft for half an hour, then picked it up and the lights works well. Water-proof IP68, Sealed & Waterproof assemblies, engraved panel makes LED condense, and the light brighter. Please make sure wiring connect correctly.
  • ✅MATERIAL: Accessory Wires is 100% Copper Wires.
  • License Plate Bracket made from Polypropylene Plastic.
  • Trailer Lights’ tail light surface and turn signal light surface made from Polycarbonate Plastic with Reflective Function, it's safer to use in the dark. License Plate Light surface made from Acrylic Plastic,with crystal-like transparency, and the light is soft and clear.
  • and black shell is made from Polypropylene Plastic. Screws and nuts on the lights are made from 304 Stainless Steel.
  • ✅ALL LED: The lights are all led, 12 LEDs in trailer light surface, 4 LEDs in license plate light surface, 1 LED in turn signal Light surface. Complies with DOT standa....
Check Stock

LED License Plate Lights Compatible With 1999-2004 Nissan Xterra, 1998-2004 Nissan Frontier OEM Led Number Lamps Replacement 12-SMD White Rear Tag Light Assembly Kit Error Free

  • ✅Application: These xenon white LED license plate lights are designed to fit for 1999-2004 Nissan Xterra, 1998-2004 Nissan Frontier. Replace OEM Part #26510-8B425, 26510-9Z400, B6510-7Z010, 26510-7Z000.
  • B65107Z010. Provide better visibility for the number tag a popular way to customize the rear lighting..
  • ✅Function: Directly replace the original Nissan Xterra WD22 rear plate lamp, change your yellowish license plate light bulb to this bright xenon white high power light bulb. Improve your Nissan identification and enhance additional safety and visibility at night..
  • ✅High Quality: Super bright 6000K xenon HID white color rear registration plate light bulb, 3-Watt, powered by 12-SMD high power white led diodes with CAN-bus error free decoders, at least three times brighter than your factory rear bumper license plate lamps..
  • ✅Easy Installation: Direct installation, no hassle plug-and-play installation. Just unplug the old incandescent light bulb and insert the new automotive LED Light bulb, fits right into original light housings..
Check Stock

RV Tail Lights,POVTOR 57 LED RV Camper Trailer Tail Lights With Running/Turn Signal /Brake/Stop License Plate Light Surface Mount RV Led Tail Lights

  • 【Unique US Flag Design 】:Rv trailer lights come with four functions,which are running light/turn signal light/Brake light/license plate light.Built with US Flag design,upgraded your RV Camper or Trailer a unique and stylish look on the road.IP67 waterproof,the lens and the rear shell are tightly connected with waterproof silicone,50000 hrs life span, could work at all conditions.Upgrade cooling system,maintain 65 ℃ after lighting tested over two hours at maximum power..
  • 【High Performance LEDs】Used High intensive 57 PCS LEDs in total,each led camper tail light employs 24PCS quality red led chips,one of the led rv tail light built with license plate holder and 9PCS high brightness white leds for license plate,others only have 5PCS leds for license plate! Outputs amazing bright and stable RV Tail light. Features better visibility and safety, also add a bonus of charming light for your night trip..
  • 【EASY INSTALLATION】:The rv camper tail lights designed with 3 specific colored wires for easy connection.Black wire is negative,Red wire is brake light and turn signal light, and Yellow wire is running light.The license plate light will be also light up,when the running light is on.Come with instructions,and this rv tail lights have mounting ho....
Check Stock

LIMICAR LED Trailer Lights Kit, Submersible Square Stop Turn Tail Trailer Light Kit, Red/Amber Trailer Marker Lights, 3rd Brake ID Light Bar for Utility Trailer Truck Boat RV Camper Snowmobile

  • BRIGHT LIGHTING: This LED Trailer Lights Adopts 15 Diodes ( 12 Red+3 Red ) LED Combination stop turn tail side marker light.
  • 19 Diodes ( 12 Red+3 Red+4 White ) LED Combination stop turn tail side marker light with license plate lamp.
  • No glare, much brighter and more energy-efficient than halogen bulbs. Side lens lights and side marker lights are all LED lights as well. Ultra bright but energy-efficient..
  • PACKAGE INCLUDES: Includes 2 Square LED Trailer Light Kit, 4 Amber 2 Red Fender Marker Lamps, 11LED 3rd Brake Identification Light Bar, 25ft Trailer Wiring, License Plate Bracket, Mounting Hardware..
  • PRACTICAL FUNCTIONS: LIMICAR Trailer Lights LED Kit Functions as running light, stop light, brake light, turn signal light, reverse light, flash light, rear reflex reflector, side marker light, side reflex reflector, license plate illuminator, clearance Light, identification light bar..
  • WATERPROOF: IP67 Waterproof. This Trailer Light Kit is completely sealed. Adopts welding technology for better waterproof performance. The screws have been removed from the lampshade to prevent water invasion better, effectively protects the tai....
Check Stock

XTASY MOTORSPORTS PLUG AND PLAY INTEGRATED LED TAIL LIGHT BLACK SMOKE YAMAHA R7 YZF-R7 YEAR 2022

  • ...999-later XL (except XL883N, XL1200N, XL1200V, XL1200X and '11-later XL1200C), 1999-later Dyna (except '09 FXDB and FXDWG, and '14-later FXDF), 2003-later FXST, FXSTS, FXSTB, and FXSTC, 2000-later FLST, FLSTF, FLSTSB and FLSTC, 1999-2008 Touring models (except FLHX, FLHTCSE2, FLHRSE3/4 Models equipped with Licenses Plate Relocation Kit P/N 53702-04). Also fits '09-'13 FLHRC, and '09-later FLHTC, FLHTCU, FLHTK and FLTRU models..
  • 【ALL-IN-ONE Function】It can be used as tail lights, brake lights and license plate lights. Built in 6 Pcs led chips lit up good for license plate light. 39 Pcs LEDs are used for taillights, low profile design, curved high with rear fenders for a streamlined looking, make your motorcycle more distinctive..
  • 【2X Brighter Than Factory Light】Getting tired of dim or old light. It’s time to get the taillights. Built in high power led chips, 2x brighter than factory light, maximize your rear end visibility, greatly improve your driving safety at night or rainy days. Easy to install, no modification needed, just connect black wire from tail light to ground on your stock light, connect red wire to your brake light, and connect yellow wire to your license plate light..
  • 【High Quality Tail Light Kit】Made of high quality ABS plas....
Check Stock

NTHREEAUTO Smoked Brake Tail Lights Motorcycle Taillights with License Plate Light Universal Compatible with Harley, Honda, Kawasaki KFX 400, Yamaha, Suzuki, ATV

  • 【Compatibility】Designed to fit motorcycles with 12v voltage and with the same back plate as the taillight. Compatible with honda, ATV, 86 rebel 450, 94 Honda Magna and Harley..
  • 【2X Brighter Than Factory Light】Built in 23pcs led bulbs for taillight illumination, 2x brighter than halogen bulbs, maximize your rear end visibility at night or rainy days. 5Pcs white led bulbs face down as license plate lights, not only illuminates the road for the drivers in the rear, improve your driving safer, but also meets the US requirements for license plate lights..
  • 【Tail Light Smoked Lens Cover】Made of high quality ABS plastic material, anti-scratch, no faded after long time exposure, water-proof, no water inside after heavy rains.
  • Smoked lens cover, add features to motorcycle, protect led bulb from water or dirt damage without weakening light..
  • 【Easy Installation】Easy to install, green wire – black negative.
  • Brown wire – Brake Light and license plate light.
  • Yellow wire – taillight and license plate light..
  • 【Buy with Confidence】You will get 1pcs taillight. You are backed by 3-Month warranty since order purchase date. Please feel free to contact us if you have any questions. Solutions will be offered once detail is confirmed..
Check Stock

OhLectric Recessed LED Light Plate - Slim Light Kit Bracket - New Construction Light Mounting Plate with Notches - Steel, Pack of 6 (26\ Rough-in Plate for 6\ Recessed LED) - OL-48065

  • RECESSED PLATE SET: Made from top quality galvanised steel material, our led light mounting plate ensures that they are durable through wear and tear. The slots allocated on the plate come with alignment notches in a way to allow easy mounting of the LED light wherever you want..
  • SUITABLE FOR NEW CONSTRUCTION: These plates are the perfect accessory to have whenever you are installing lights in a newly constructed building! The rough in plate light mount comes in a variety of choices for the recessed holes from 2 inches to 8 inches which you can choose depending on the lighting need..
  • MODERN FEATURES: The galvanised steel used in the making of the plates make it lightweight and less likely for rust formation. Use these plates for planning your lighting layout prior to hanging drywall, they will hold the precise spot in the ceiling where the light fixture will be mounted..
  • EASY INSTALLATION: The recessed light plate has mounting holes and tracks that make our mounting plate perfectly fit in different types of structure layouts. Alignment notches on the plate will help align multiple plates. Fix the plates with screws(not included) through the mounting slots..
  • VERSATILE APPLICATIONS: They are ideal for all types of construction projects from resid....
Check Stock

OHLECTRIC New Construction Rough-in Plate for Led Downlight - Slim Steel Plate/Bracket - Use As A Guide for Drywaller to Install LED Fixture - Used with 6\ Model - Pack of 48 - OL-31359

  • RECESSED PLATE SET: Made from top-quality galvanized steel material, our led light mounting plate ensures that they are durable through wear and tear. The slots allocated on the plate come with alignment notches in a way to allow easy mounting of the LED light wherever you want.
  • SUITABLE FOR NEW CONSTRUCTION: These plates are the perfect accessory to have whenever you are installing lights in a newly constructed building! The rough-in plate light mount comes in a variety of choices for the recessed holes from 2 inches to 8 inches which you can choose depending on the lighting need.
  • MODERN FEATURES: The galvanized steel used in the making of the plates makes it lightweight and less likely for rust formation. Use these plates for planning your lighting layout before hanging drywall, they will hold the precise spot in the ceiling where the light fixture will be mounted.
  • EASY INSTALLATION: The recessed light plate has mounting holes and tracks that make our mounting plate perfectly fit in different types of structure layouts. Alignment notches on the plate will help align multiple plates. Fix the plates with screws(not included) through the mounting slots.
  • VERSATILE APPLICATIONS: They are ideal for all types of construction projects from residentia....
Check Stock

NTHREEAUTO Smoked LED Brake Tail Light Universal Rear Taillight Integrated Turn Signals License Plate Lights

  • 【Compatibility】Universal led taillight fits most 12V motorcycles, dirt bike, ATVs, street bike.
  • 【2X Brighter Than Factory Light】Built in 20 PCS led bulbs, high brightness, maximize your rear end visibility at night or rainy days, not only illuminate the road for the drivers in the rear, improve your driving safer, but also meets the US requirements for tail lights..
  • 【Durable & Waterproof】Made of high quality ABS plastic material, anti-scratch, no faded after long time exposure, water-proof, no water inside after heavy rains.
  • Smoked lens cover, add features to motorcycle, protects led bulb from water or dirt damage without weakening light..
  • 【Easy Installation】The Rear tail light designed with turn signal + brake light + running light + license plate light. Easy wiring, Black -- negative, Blue -- running light/license plate light, Red -- brake light/license plate light, Yellow -- turn signals. NOTE: Minor modification may be required for some models!.
  • 【Buy with Confidence】You will get 1pcs smoked tail light. You are backed by 3-Month warranty since the order purchase date. Please feel free to contact us if you have any questions. Please feel free to contact us if you have any questions.
Check Stock

Carrep Submersible Square LED Trailer Lights Kit Waterproof 12V Utility Red LED Stop Turn Tail License Brake Running Light Lamp Under 80' Boat Trailer DOT Compliant

  • Widely Application + DOT Certification⭐ Designed for Trucks, trailers under 80", tractors, semi-trailer, Dump Truck, bus, boat, special vehicle,etc. The LED trailer tail Lights Serves 7 functions: Stop/Turn/Tail/Rear reflector/side reflector/side marker light/ license plate light..
  • All-in-one Kit⭐Trailer tail light kits has everything you need, with 1 Pairs trailer Lights + 2 gaskets + 2 amber clearance lights + one 22 feet and one 4 feet wiring harness + 1 license plate bracket + 4 reflective sticker + some screws..
  • Completely Sealed and Waterproof⭐ No screw on the lamp shade.Submersible Led Trailer Lights's lens and housing are completely welded together, The circuit board of tail light is seal..
  • High Visibility LED⭐ All diodes are LED, NOT Any incandescent bulbs! High Brightness LED Combination tail lights last more 30-40 times than standard incandescent lights.And trailer light kit uses less energy than traditional standard incandescent lights. It saves you time and money..
  • Installation Tips⭐Lamp with license plate light on the left side, the other on the right side. For wiring routing: Please see Product Description or User manual. Gifts for dad men him..
Check Stock