Reviews Led Display For Indicate

48V Battery Fuel Gauge Indicator, Golf Cart, Yamaha,EZGO, Fork Lifts,Club Car,LED Battery Indicator Meter Gauge

  • 【48V Battery Fuel Gauge】The 48 Volt Led Battery Meter compatible with Golf Cart Club Car EZGO Yamaha 48 Volt LED Battery Gauge Meter, Works with 48V Lead-Acid Batteries in Golf Carts, Forklifts, Trucks, Scooters and More..
  • 【LED Battery Indicator Meter】10 segment LED Bar Graph display, 10% per segment：3 color LED display,different light displays different battery level visually.
  • LED flash for low charge&high charge warning.
  • 【Note】The second LED from the left flashes as a warning that the batteries voltage has been discharged to 80% of their capacity.It is strongly recommended to recharge the batteries when you get to the 3rd Yellow LED, this is a safety precaution to avoid dead batteries.
  • 【 Installation Notes】Make sure your "C" terminal is either connected to the Battery "+" or a Key switch, Meter will scan from full to empty then shuts off .Meter will stay full position while first is connected with batteries and indicate the actual battery level after 155 seconds..
  • 【 Battery Indicator】The 48V Battery Indicator is made of high quality ABS material, waterproof, heat resistant, reliable performance.Displayed with 10 segment LED bar graph (1 Red, 2 Yellow and 7 Green LED), different light displays different battery level..
Check Stock

uxcell IR No Touch Door Release Exit Button NO/NC/COM Sensor Switch w LED Indicator for Access Control 115mmx70mm Panel 12V 3A

  • Serial Design - different color panel suit for different requirements..
  • Double color indicator - this product has double color indication, blue LED display when standby and green LED display when triggered..
  • Non-contact switch induction design with dual-color LED indicator - especially suitable for dark places. The interactive design of light touch response can better prompt users..
  • Panel design - 304 stainless steel front panel and indicate light make it looks more elegant and fashionable..
  • Application - used for any access control application and is commonly used in offices, banks, department stores and many more.
Check Stock

Cartman 12V Car Battery Alternator Tester, Test Battery Condition & Alternator Charging, LED Indication

  • LED display indicates condition, for 12V battery only..
  • Alternator state check, battery state check, check before charge and overload display..
  • Alternator check : accelerate your engine to 2000 rpm when the green light is lit ,charging circuit is ok..
  • Battery check: indicate the percentage charging in the battery ..
  • Charger check: when green light is lit, charging is complete..
Check Stock

Fielect uxcell IR No Touch Door Release Exit Button NO/NC/COM Sensor Switch w LED Indicator for Access Control 115mmx70mm Panel 12V 3A

  • Serial Design - different color panel suit for different requirements..
  • Double color indicator - this product has double color indication, blue LED display when standby and green LED display when triggered..
  • Non-contact switch induction design with dual-color LED indicator - especially suitable for dark places. The interactive design of light touch response can better prompt users..
  • Panel design - 304 stainless steel front panel and indicate light make it looks more elegant and fashionable..
  • Application - used for any access control application and is commonly used in offices, banks, department stores and many more.
Check Stock

45W HF Power Amplifier For YASEU FT-817 ICOM IC-703 IC-705 Elecraft KX3 QRP Ham

  • hf power amplifier，for QRP transceiver， Improve signal。Can be used both as a base and mobileunit,Extremely Small Compact and lightweight ， Full integration with the FT-817 using the supplied interface cable, The amplifier incorporates various protection circuits such as high VOLTAGE，front mounted LED display..
  • This amplifier can be successfully used with other QRP rigs such as the ICOM IC-703(and Elecraft KX3)..
  • YAESU FT-817ND Quick operating manual: 1. Connect power cord to DC power supplier, Red to "+", Black to" -" 2. Connect ACC cable to FT-817 ACC and amp 3. Adjustment “BAND ADJ” button， Select the band..
  • 4. Connect antenna to amp "ANT" and "input" from FT-817 antenna out. Notice! The antenna you used that should well tuned, the SWR should less than 1:1.5 5. Open the power on both power supplier and AMP. The power indicate on. 6. Power on FT-817, the band indicate on Amp shoule be on..
  • 7. Press PTT, the TX indicate on Amp should be on.Notice! If working on FM or SSTV for long operating time, should lower the output power on FT-817, say 2.5W or 1W..
Check Stock

Jialan 48V Battery Fuel Gauge Indicator,for Golf Cart,EZGO, Yamaha, Fork Lifts,Club Car,Floor Care Equipment LED Battery Indicator Meter Gauge

  • 【48V Battery Fuel Gauge】This device is only workable on lead-acid battery but not Trojian type.LED battery indicator available in 48V volt DC acid battery.
  • 【LED Battery Indicator Meter】10 segment LED Bar Graph display,Resolution: 10% per segment：3 color LED display,different light displays different battery level visually.
  • LED flash for low charge&high charge warning.
  • 【Note】The second LED from the left flashes as a warning that the batteries voltage has been discharged to 80% of their capacity.It is strongly recommended to recharge the batteries when you get to the 3rd Yellow LED, this is a safety precaution to avoid dead batteries.
  • 【 Installation Notes】Make sure your "C" terminal is either connected to the Battery "+" or a Key switch, Meter will scan from full to empty then shuts off .Meter will stay full position while first is connected with batteries and indicate the actual battery level after 155 seconds..
  • 【 Battery Indicator】LED battery indicator battery fuel gauge battery charge gauge for DC powered equipment such as fork lifts, golf carts, floor care equipment, and any other battery powered.
Check Stock

Siglent Technologies SPD3303C DC Power Supply

  • Four LEDs indicate IEEE802. 3af or 802. 3at/but standard.
  • Dual 7-digit LEDs indicate power source either End Span (1/2, 3/6) or Mid Span (4/5, 7/8) or across all four pairs.
  • Determines standard PoE or non-standard passive PoE.
  • Two yellow LEDs indicate reversed polarity for power type.
  • When used inline, the display alternates between Voltage, Current and Power with a step button for selecting specific data to display.
Check Stock

EBL 12 Bay LCD Universal Battery Charger for Rechargeable AA AAA 9V NIMH NICD Batteries

  • Upgraded Charging freely - Independent charging channels smart charger, can charge 1-10 pieces AA/AAA Ni-Mh/Ni-CD rechargeable batteries and 1-2 pieces 9V Ni-Mh/Ni-CD/Li-ion rechargeable batteries.
  • LCD Display - Smart LCD screen will indicate the whole charging process for the AA/AAA batteries and the LED light will indicate the 9V’s..
  • Safety guarantee - Battery detection technology, automatically turn to trickle charge when batteries are full charged..
  • Intelligent control - Advanced MCU control and -∆V function, over-heat and over-current protection, short-circuit protection, non-rechargeable and defective battery detection..
  • Biggest Save - Best aa aaa battery charger but lowest price and high efficient after sale service always here to help.
Check Stock

Carbon Monoxide Detector,CO Monitor Alarm Detector Battery Powered,CO Detector with LCD Digital Display and Sound Warning for Home,Office,School,Basement,Garage,Complies with UL 2034 Standards

  • ...ely detects carbon monoxide levels and quickly response to save your life in the first time when fire hazard occurs,To ensure complete protection make sure to place one on each level of your home and in each bedroom..
  • Safe And Visible LCD Digital Display—With 3 digits LCD displayer is optional, 'Err' on the LCD to indicate the unit is malfunctioning. 'Lb' on the LCS to indicate it low battery and need to replacement. '999ppm' on the LCD to indicate CO level over 999ppm And Loud 85 decibel alarm with LED Flash While in the Alarm Mode for the life-saving safety, protect the family from carbon monoxide..
  • Alarm Standard & Alarm Warning—When the alarm detects that CO concentration exceeds 50ppm , alarm within 60-90 minutes.
  • 300ppm, alarm within 3 minutes. When a dangerous level of carbon monoxide is detected the red LED will flashes and a loud alarm pattern will sound--Loud 85 decibel alarm with LED Flash..
  • Easy TO Install & Widely Use—Simple to use,with a single test/reset button,Comes with mounting accessories, just drill holes in the right places , and done.
  • Used for bedroom, kitchen, living room and any other area.NOTE: When testing the detector, do not blow the holes directly with gas..
Check Stock

Socket Tester with GFCI check. Receptacle Tester for Standard AC Outlets. Automatic Electric Circuit Polarity Voltage Detector Breaker Finder,Includes 7 Visual Indications and Wiring Legend TA106B

  • ...tlet socket for correct wiring and RCD/GFCI trip function. It can test the protection system to ensure the household electrical safety. Perfect for protect your security against the risk of electric shock. Voltage: 48V-250V 45-65Hz,.
  • 7 LED Light Patterns Band voltage display – With 7 easy to read indicators to indicate the state of the socket, easy to judge: Correct, Open Ground, Open Neutral, Live/Neutral Reverse,Live/Ground Reverse, Open Live & Live Neutral Reverse..
  • Easy to Use – Detect whether neutral, live and earth wire is connected correctly and to indicate which wire is missing with clear light patterns.Bright LED Light & 3 Test Indicators – The light patterns are well labeled on the surface of the socket tester. The tester adopts a built-in light so it can also be used in the dark. Easy and fast to read the test result..
  • Wide Application – Widely used for electric maintenance testing, office sockets testing, power strips testing and wall sockets testing in school, laboratory, factory and other social field. It saves you lots of time in testing problems with sockets. Portable Design – Compact size, light weight and convenient to use. With voltage backlight LCD display for testing voltage..
Check Stock