Reviews Leaf Spring Bolts

LIBRA 3500lb Single Trailer Axle Suspension Kit 1750lb Leaf Springs & Ubolt Kit

  • 1,750lbs capacity per each spring, for standard 3,500lbs trailer axle,Eye to Eye length: 25-1/4 inch, Free open: 3 inch, width of leaf: 1-3/4 inch, 4 leaves, 9/16 inch bushing dia, nylon bushings installed.
  • It will replace SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184 (different SKU# but same spring).
  • Include 3,500lbs axle U-bolt kit for 2-3/8" dia round trailer axles , Kit include: 4 x 5-1/2" long U bolts, U bolts dia. 1/2".
  • LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..
Check Stock

Trailer Slipper Spring Suspension and Tandem Axle Hanger Kit for 3 Tubes - 7000 Pound Axles

  • (4) 5 Leaf Slipper Spring for 7000 lb Axles.
  • (4) U-bolt Tie Plates for 1-3/4" or 2" Spring.
  • (8) 3-1/2" long x 9/16" diameter shackle bolts.
  • (2) 4-11/16" long x 7/8" diameter equalizer bolts.
  • This supsension and hanger kit is for a 7k tandem axle setup (14K total capacity).
Check Stock

Trailer Double Eye Spring Suspension and Single Axle Hanger Kit for 2 3/8\ Tube - 3500 Pound Axle

  • (2) 4 Leaf 25 1/4" x 1 3/4" Trailer Double Eye Spring for 3500 lb Axles.
  • (6) 3" long x 9/16" diameter shackle bolts.
Check Stock

Supreme Suspensions - Rear Lift Kit for 2000-2010 Chevrolet Silverado 1500HD 2500HD 3500HD 1½ - 2 Rear Lift Kit Add-A-Leafs 37.5 Long + Isolator Pads + Square Bend U-Bolts 2WD 4WD 8-Lug

  • COMPATIBLE WITH 2000 - 2010 Chevrolet Silverado 1500HD, 2500HD and 3500HD (2WD 4WD). Only fits 8-Lug Models with single-pin leaf packs Only..
  • CONTENTS: 2x High-Strength Steel Add-A-Leafs, 4x Vibration Isolator Pads, 4x Square Bend U-Bolts, Installation Hardware, Installation Instructions and....
  • TECHNICAL NOTES: 1.5-2 inch rear suspension lift, depending on the condition of your leaf packs. Leaf Specifications: 2.5" Wide, 36.5" Top Length,....
  • INSTALLATION: Easy 'bolt-on' installation takes 1 to 2 hours. A Leaf Spring unloading/compressing tool is required for a safe installation. An....
  • BENEFITS: Supreme Suspensions Add-A-Leafs are constructed from heat-treated, tempered steel and can be added to your existing leaf spring packs to....
Check Stock

LIBRA 3500lb Single Trailer Axle Suspension Kit 1750lb Leaf Springs & Hanger Kit

  • 1,750lbs capacity per each spring, for standard 3,500lbs trailer axle,Eye to Eye length: 25-1/4 inch, Free open: 3 inch, width of leaf: 1-3/4 inch, 4 leaves, 9/16 inch bushing dia, nylon bushings installed.
  • It will replace SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184 (different SKU# but same spring).
  • Include Complete single trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x 3" tall hangers, 2 x 2.1" tall hangers, 4 x shackle straps (eye to eye 3.09"), 6 x 9/16"-18 x 3" long shackle bolts and locknuts.
  • LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..
Check Stock

Trailer 6 Leaf Heavy Duty Slipper Spring Suspension and Tandem Axle Hanger Kit for 3 Tubes - 7000 Pound Axles

  • (4) 6 Leaf slipper Spring for 8000 lb Axles.
  • (4) U-bolt Tie Plates for 1-3/4" or 2" Spring.
Check Stock

Trailer 6 Leaf Double Eye Spring Suspension and Tandem Axle Hanger Kit for 3' Tubes - 7000 Pound Axles

  • (4) 6 Leaf 25 1/4" x 1 3/4" Trailer Double Eye Spring for 7000 lb Axles.
  • (4) U-bolt Tie Plates for 1-3/4" or 2" Spring.
Check Stock

Belltech 6203 Lowering Block Kit

  • Belltech Lowering Blocks provide an inexpensive, easy to install way to lower your Mini Truck by increasing the distance between the leaf spring and....
  • Lowering block kits are manufactured of high quality extruded aluminum and come complete with blocks, U-bolts, Nyloc nuts and washers.
  • The extruded aluminum process yields higher strength ratings when compared to cast or steel lowering blocks.
  • Lowering blocks are designed to lower the rear of your vehicle in 1,2 or 3 inch increments.
  • Also available with built in 2 degree taper for drive line angle correction.
Check Stock

Belltech 5979 Muscle Car Leaf Spring

  • Belltech's leaf springs are designed to easily lower the rear of your leaf spring equipped Sport Truck or SUV by up to 4 inches depending on application.
  • By recalculating the arch of the leaf spring and compensating with the appropriate spring rate through the latest manufacturing techniques.
  • All Belltech Leaf Springs are direct OEM replacements.
  • Come complete with high quality OEM style bushings.
  • OEM ride quality with added performance, control and comfort.
  • This is sold as a single leaf spring, quantity 1.
Check Stock

6" Rear Axle Flip Kit Pickup Truck Lowering Drop Kit for Chevy Silverado C1500 & GMC C1500 Half-Ton Trucks 1988-1998

  • Perfect fit:For Chevy Silverado C1500 1988-1998, For GMC C1500 Half-Ton Trucks 1988-1998..
  • Features - The kit can be used to lower your truck by placing the rear axle on top of the leaf spring..
  • Package including: 2*Spring axle plates,2*Perches,4*U-bolts,2*Bump stops and hardware..
  • Material - Heavy duty stainless steel lift kit, for rusting resistance and long service time.Durable and anti-rust..
  • SATISFACTION SERVICE - If you are not satisfied with our products.You can request a full refund within 30 days to support a 12 month warranty.Professional and sincere service allows you to purchase without risk!.
Check Stock