Reviews Lead Chromate
TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood (Gray, Quart)
- ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
- for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
- COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
- apply a second coat only if a higher build is needed.
- to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
- EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
- boat primer is chromate-free and lead-free.
- DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
- marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
- AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
- do not apply Topside Primer thicker than recommended or it may not cure properly.
Check Stock
Louie's Backyard Cookbook: Irrisistible Island Dishes and the Best Ocean View in Key West (Roadfood Cookbook)
- ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
- for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
- COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
- apply a second coat only if a higher build is needed.
- to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
- EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
- boat primer is chromate-free and lead-free.
- DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
- marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
- AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
- do not apply Topside Primer thicker than recommended or it may not cure properly.
Check StockWorldPac (Pack of 4) 3/8-inch, Grade 70 Clevis Grab Hook, Yellow Chromate Finish
- Heavy Duty 3/8" Diameter Pin Clevis Hook.
- Eliminates connecting links and cold shuts.
Check StockUS Cargo Control 1/2 Inch Grade 70 Clevis Grab Hook 4 Pack
- Not to be used in overhead lifting applications.
- Forged with high-strength, low-alloy carbon steel. Meets NACM & ASTM Standards..
Check StockCM BAN07510 Bandit Ratchet Lever Hoist, 14.68\ Length, 3/4 Ton Capacity, 10' Lift
- Our First Hoists with CM Smart ID RFID Technology.
Check StockFogCutter X Knife - Blunt Tip
- Patented "Shears" built into the blade can cut it all, from monofilament to kelp.
- Blade is 4 3/8" long and constructed of 420 stainless steel.
- Chromateü treatment helps prevent rust and corrosion.
- Patented, easy-release, positive-locking sheath.
Check StockWoodlink PRO4 Premier Cedar Bird Feeder Brown
- Constructed of re-forested, kiln dried, inland red cedar with chromate screws.
- Sturdy large ranch style feeder provides great bird visibility.
- Roof is hinged for easy filling and cleaning.
Check StockIdeal Security Inc. W4005BX125 Plastic Cap Nails, Stainless Steel
- Spiral steel nails with yellow chromate plating.
Check StockWoodlink NASQBOX Audubon Squirrel Munch Box Feeder
- Handcrafted feeders made of kiln-dried natural cedar.
- Keep squirrels away from your bird feeders by providing them with their own source of food.
Check StockUS Cargo Control 1/2 Inch Grade 70 Clevis Slip Hook 4 Pack
- Not to be used in overhead lifting applications.
- Forged with high-strength, low-alloy carbon steel. Meets ASTM Standards..
Check Stock
