Reviews Lcd Printers

ANYCUBIC 3D Printer Resin, 405nm SLA UV-Curing Resin with High Precision and Quick Curing & Excellent Fluidity for LCD 3D Printing (Grey, 500g)

  • Low Shrinkage & High Precision: ANYCUBIC UV resin prints the models with low shrinkage during the photocuring process, which ensures the high precision and smooth surface..
  • Quick Curing & Strong Stability: ANYCUBIC photopolymer resin was specially developed to reduce the forming time with its extraordinary fluidity, and 3d model shows good stability in moist and corrosive environment after cured..
  • Rigidity & Toughness: ANYCUBIC LCD resin has a good combination of hardness and toughness, which brings easy removal of the model and delivers accurate printing details..
  • Multiple Colors & Universal Compatibility: ANYCUBIC standard resins are compatible with the majority of DLP/SLA/LCD 3D printers, works best with ANYCUBIC LCD 3D printers, multiple colors for your choice..
  • Safe & Secure Package: ANYCUBIC UV-Curing resin bottle is packed well in plastics bubble wrap, the cap is completely intact, surrounded by a tight-fitting air bag. No worries for leakage..
Check Stock

Ximimark 1PCS 5V 12864 LCD Display Module 128x64 Dots Graphic Matrix LCD Blue Backlight

  • 12864 LCD Display Module 128x64 Dots Graphic Blue Color Backlight.
  • This product is a LCD display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment, networking.
  • Package included： 1PCS x 5V LCD Display Module 128x64 Dots Graphic Matrix LCD 12864 Blue Backlight New.
  • If You Are Not Satisfied with Your Purchase for Any Reason, Please Feel Free To Contact Us at the Buyer Center or Support Email, 24/7 Quick Reply..
Check Stock

Sovol 3D 2 Pack Stick On Gasket for 5.5' & 6.1' 3D Resin Printers, Universal Protection from Resin Spill, Fits for Mars Series ANYCUBIC Photon QIDI Tech 5.5s - Resin Resistant

  • ...nsive repairs. It also helps keep the FEP film from creating suction and pulling on the LCD, which can dislodge it while attempting to remove the vat. *THIS LISTING IS FOR THE GASKETS ONLY. IT IS NOT A SCREEN PROTECTOR..
  • [Suitable for both 5.5" & 6" resin printer] – Works on multiple 5.5 inch or 6.1 inch LCD resin printers. Compatible with EPAX X1, Elegoo Mars/Mars Pro/Mars C/Mars 2/Mars 2 pro, Anycubic Photon/Photon-S, Prusa LD-002R, QIDI Tech Shadow 5.5 (NOT 6.0) & Longer Orange 30 UV Resin Printers. Please note: You must re-level your build plate per the instructions included after installation..
  • [Extra durable] - Made of high-quality polypropylene, our gasket is built to last. It is resin-proof and safe from tears and abrasion, while remaining very flexible..
  • [Save your prep time] - Two-piece backing ensures easy installation. Now you're no longer forced to tidy up your printer right after a print. With our stick on gasket, you will have peace-of-mind knowing that your printer internals and LCD are protected from resin leaks..
  • [High light transmittance] - It would not affect the performance of LCD screen. Any questions or issues about sovol products please feel free to contact us..
Check Stock

4Pcs LCD1602 1602 LCD Module Green Screen 16x2 Character LCD Display with IIC I2C Serial Interface Adapter Module

  • 1602 lcd screen can display 2-lines x 16-characters with built-in industry standard HD44780 equivalent LCD controller.
  • LCD1602 1602 LCD module working voltage: 5V.
  • To come with a potentiometer, which is applied to adjust backlight and contrast.
  • It only takes two I/O port thus saving more for other usages. You can adjust the contrast by the potentiometer at its back. If you don’t want the back light, you can also unplug the jumper cap at the LCD back..
  • LCD1602 1602 LCD module compatible with copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices..
  • 1602 display function: LCD display with I2C serial interface can be applied to display real time clock, temperature, humidity and so on..
Check Stock

ELEGOO 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing Clear Red 500g

  • Low Shrinkage and High PrecisionELEGOO photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process ,which ensures the high precision of the print model with smooth finish..
  • Fast Curing and Great StabilityELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile its great stability and proper hardness guarantee a worry-free printing experience and successful printing..
  • Bright and Stunning Colors: With high quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning color effect just like an artwork..
  • Wide ApplicationsGiven the outstanding performances, ELEGOO standard resin is suitable for most DLP/LCD 3D printers. Works best with the LCD 3D Printers..
  • Safe and Secure PackagingLeak-proof bottle fully wrapped with a plastic bubble bag and exquisite designed package box make sure the resin stays in place where they belong.
Check Stock

ELEGOO 6.08 Inches Monochrome 2K LCD Compatible with ELEGOO Mars 2 and ELEGOO Mars 2 Pro Resin 3D Printers with 1620x2560 Resolution Active Area 3.25 x 5.14 inches

  • Original Monochrome 2K LCD screen used on ELEGOO Mars 2 and Mars 2 Pro resin 3D printer.
  • 6 inches LCD with 1620x2560 high resolution ensures your printing with high precision.
  • Four times longer in lifespan and two times faster in printing speed than the regular RGB LCD 3D printers, which means higher printing efficiency,....
  • Assembly of the 2K LCD screen is straightforward and easy. (See tutorial video links in the description below).
  • The 2K LCD screen kit is well-protected with anti-static PE foam package in the box.
Check Stock

ELEGOO Water Washable 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing 500Gram Clear Blue

  • Low Shrinkage and High PrecisionELEGOO photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process ,which ensures the high precision of the print model with smooth finish..
  • Fast Curing and Great StabilityELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile its great stability and proper hardness guarantee a worry-free printing experience and successful printing..
  • Bright and Stunning Colors: With high quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning color effect just like an artwork..
  • Wide ApplicationsGiven the outstanding performances, ELEGOO standard resin is suitable for most DLP/LCD 3D printers. Works best with the LCD 3D Printers..
  • Safe and Secure PackagingLeak-proof bottle fully wrapped with a plastic bubble bag and exquisite designed package box make sure the resin stays in place where they belong.
Check Stock

ELEGOO Air Purifier for LCD/DLP/MSLA 3D Printers Pack of 2

  • Eliminate Printing Odor: The built-in battery-driven motor pumps air to the activated carbon to absorb and filter the resin odor during the printing..
  • Comes with 4pcs of Carbon Filters: 2pcs are in purifier and 2pcs are packaged individually. The same carbon block is not required for the separately....
  • Widely Applicable to Various Resin Printers: It is compatible with most LCD/DLP/MSLA resin printers on the market, and it is an excellent match for....
  • Worry-free Battery Life: Energy-efficient motor with 2000mah battery can keep working continuously for 24 hours..
  • Quality Assurance: Produced by ELEGOO, enjoy the same technical support as the ELEGOO official..
Check Stock

HiLetgo 3D Printer Reprap Smart Controller 12864 LCD Display with Smart Controller Board for 3D Printer RAMPS 1.4 Reprap Mendel Prusa for Arduino 128x64 LCD Blue Color

  • This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display..
  • LCD 12864 graphic smart display module with blue backlight, Small and light appearance, it is easy and convenient to use..
  • Using a large screen 12864LCD (3.2'), it can support 8 GB..
  • Print your 3D designs without PC, just with a g-code design stored on the SD card..
  • Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc..
Check Stock

ANYCUBIC 3D Printer Resin 405nm SLA UV-Curing Resin with High Precision and Quick Curing & Excellent Fluidity for LCD 3D Printing Grey 1kg

  • Low Shrinkage & High Precision: ANYCUBIC UV resin prints the models with low shrinkage during the photocuring process, which ensures the high....
  • Quick Curing & Strong Stability: ANYCUBIC photopolymer resin was specially developed to reduce the forming time with its extraordinary fluidity, and....
  • Rigidity & Toughness: ANYCUBIC LCD resin has a good combination of hardness and toughness, which brings easy removal of the model and delivers....
  • Multiple Colors & Universal Compatibility: ANYCUBIC standard resins are compatible with all DLP/LCD 3D printers, works best with ANYCUBIC LCD 3D....
  • Safe & Secure Package: ANYCUBIC UV-Curing resin bottle is packed well in plastics bubble wrap, the cap is completely intact, surrounded by a....
Check Stock