Reviews Laser Engraver For Metal

ENJOYWOOD CEL-E10 Laser Engraver, 50W Laser Engraving Cutting Machine,10-15W Laser Output Power Laser Engraving Machine,0.06 * 0.06mm Double Compressed Spot Laser Engraver for Wood and Metal Etc

  • Double Compression Spot Coupling Technology: laser engraver laser power is 10-15W, ultra fine compressed laser spot is reduced to 0.06*0.06mm, Other 10W Machine laser focus area is 0.06*0.08mm. The smaller the laser spot, the greater the energy of the laser. Laser could control laser beam more accurately to 0.01mm. Cutting and engrving more precision..
  • Fast Engraving and Cutting: The laser engraving machine burning Temperature is up to 1200℃. Engraving & cutting speed is 300% higher than that of ordinary models.Engraving speed up to 11,000mm/min.ENJOYWOOD laser engraver with 50mm focal length, Cutting depth increased by more than 20%,Other 10W Machine With 30mm focal length..
  • Vivid Colors Engraving: Power 10-15W optical power can oxidize the metal surface. Oxidized metals exhibit rich colors.By controlling the speed, power and line spacing you can have color laser engraving..
  • The New Filter Panoramic Glass Eye Protection Design: Plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles, you can also watch laser engraving. The emergency stop button and reset switch are more convenient and safe to use.Wide Compatibility: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, supp....
Check Stock

Official Longer RAY5 10W Higher Accuracy Laser Engraver, 3.5\ Touch Screen, 0.06 * 0.06mm Laser Spot, 60W DIY Laser Engraving Machine for Wood and Metal, Acrylic, Leather

  • 10W OUTPUT POWER: The Longer RAY5 laser engraver adopts diode laser engraving technology, with an 10w output power. This engraver has 0.06*0.06mm high energy diode laser beam and strong cutting penetration and precision. It also has a large engraving range of 410x410mm (16.14 x 16.14 inches). With the latest 32-bit built-in chip, it can quickly realize cutting and carving on acrylic board, metal, wood, stainless steel, cylinder, rubber, leather, paper, fabric, ceramics, bamboo, PCB board, etc..
  • 5 PROFESSIONAL SAFETY PROTECTIONS: The Longer RAY5 laser engraver is always keeping safe. For this purpose, we explore quadruple protection mode. ① We pioneered flame protection technology, if a flame is found, the machine will stop and make a sound to indicate abnormal conditions. ② The laser will stop engraving when a movement occurs. ③ The laser module stay around for more than 15s will stop working. ④ RAY5 laser cutter has a laser protection cover, which can protect your eyes from UV rays..
  • 3.5"USER-FRIENDLY UIINTERFACE TOUCHSCREEN & 4 CONNECTION METHODS: The Longer RAY5 laser cutter has a built-in 3.5" color touchscreen with a user-friendly interface. You can directly operate through the touchscreen, including using a variety of connection meth....
Check Stock

ATOMSTACK A5 M50 PRO Laser Engraver, 40W Laser Cutter with Offline Engraving, Laser Engraving Machine with APP Operate Fuction, 5.5W-6W Output Power, 410x400mm

  • IMPORTANT: There need to update the firmware at first to work with the APP function. The laser engraver is without WiFi at first. Please check the video which below the product pictures named "Upgrade the firmware for the engraver and operate with APP". You can also contact with the seller to get the APP manual and help for updating the firmware..
  • 【Upgraded Compression Laser Beam】The laser cutter and engraver machine has quadruple lens compression Technology. 5-5.5W Optical Power. Fixed Focus Compressed Spot, spot smaller and the energy more concentrated, and more refined engraving products. The high-density laser can easily cut 15mm light wooden boards, 12mm acrylic.The newly compression laser beam engraving speed is 60% faster than ordinary laser..
  • 【Eye-protection Flame-retardant Filter Panoramic Glass】The engraving machine is equppied with the fliter glass can prevent eye burns, and eliminate the hidden danger of acrylic being easily burned. You can also clearly watch laser engraving but you do not need to wear goggles. Thus not only reduces the cost of the goggles, but also makes engraving safer..
  • 【Intelligent Protection Design & Emergency Button】Limit switches are installed on both X-axis and Y-axis. At the maximum stroke of the laser c....
Check Stock

HTPOW Laser Engraver, Laser CNC Carving Machine , Large Area Printer cutter engraver 16.1'x14.5', Support Win/MAC/OS/Mobile WiFi Connection, Apply to Wood, Bamboo, Acrylic, Leather (20W)

  • 【Innovative Eye Protection Design】HTPOW l wood cutter machine,The wood engraver protective cover perfectly protect your eyes,filter UV light for 97%. You can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles, prevent pets and children from grabbing the laser spot..
  • 【High-Precision & Easy Installation】DIY laser cutter engraver machine adopts Aluminum alloy guide rails and rubber pulleys, smooth running, precise engraving, high-quality laser, precise beam control, engraving accuracy of 0.01mm.
  • engraving area of 16.14×14.57''.The entire engraving machine adopts a modular design, replace and update cnc laser cutter engraver machine parts. And the assembly can generally be completed within 10-20 minutes..
  • 【Upgraded Auto Focus Function:】 wood laser cutter engraver machine no need to adjust the focus before engraving.
  • the new metal laser focal spot is 50% smaller than other wood engraving machine , new wood carving combines precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser..
  • 【Wide compatibility & Precise scale lines axis】There are precise scale lines on the X-axis and Y-axis to facilitate....
Check Stock

ATOMSTACK Laser Engraver, A5 20W Laser Engraving Cutting Machine CNC, 4.5W-5W Output Power, Upgraded Precise Fixed-Focus Machine, Eye-Protection Design, DIY Laser Marking formWood, Leather, Vinyl

  • Innovative Eye Protection Design: The laser engraver with laser protective cover perfectly protects your eyes when your working Engraving Wood and Metal, filter UV light for 97%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles..
  • High-Precision & Easy Installation: The laser engraver machine CNC with 20W High-Performance Laser Head. It can not only engrave but also cut 1/8″ of the wood and acrylic. Full-metal structure design, more solid, and the entire structure has been designed for quick assembly, and the assembly can generally be completed within 10-20 minutes..
  • Upgraded Auto Focus Function: No need to adjust the focus before engraving.
  • the new laser focal spot is 50% smaller than other ordinary lasers, new laser combines precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser..
  • Wide Compatibility: The Laser engraver cutter can be compatible with various mature engraving software, such as LaserGRBL, LightBurn(paid), support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF, etc..
Check Stock

10W Output Laser Engraving Machine, JICCODA L1 High Accuracy 0.05 * 0.1mm Compressed Spot Laser Cutter Mini CNC Machine with 5.0 Bluetooth Technology Laser Engraver for Wood and Metal

  • [Upgraded 10W Laser mould] 10W JICCODA L1 laser engraver adopts the latest double-layer 5.5W laser technology , which can reach the speed of laser cutting up to 10,000mm/m and cut 10mm thickboard and 5mm acrylic plates at a single pass. The service of the laser module up to 10,000 hours in regular temperature..
  • [Built-in dual motors] Comparing the most laser machine has only one motors ,JICCODA L1 cutter machine master 2 motors inside laser frame in order to keep the laser engraver machine more stable while it engraving..
  • [Ultra-accuracy engraving compressed spot & fast laser cutting] 0.05*0.1mm ultra-accurate compression spot can achieve your varieties laser cutting and laser engraving for wood and metal, DIY creation activities and bring you a distinct grain pattern,vivid picture and clear-cut engraving and cutting experience. FR4 double-sided main board with glass fibre material strength the precise of our mini cnc machine..
  • [Easy assemble]The construction of high-strength aluminum alloy and ABS material makes the JIOOCDA L1 laser machine robust and stable. The laser cutting engraver has a disassembled modular design with the stable performance of the drive plate and the laser tube core with heat dissipation function. The laser engraver and cutting m....
Check Stock

xTool Laser Engraving Marking Paper for Laser Cutter & Laser Engraver, 2 PCS, Laser Engraving Tools, to Laser Engrave on Metal, Glass, Ceramics, Crystal, Jade (Black, 15.4' x 10.6')

  • Premium Auxiliary Laser Engraving Supplies: Laser marking paper can assist you in efficiently engraving patterns on metal, ceramics, stone, glass, crystal, and jade.
  • compatible with most laser cutters and engraver machines.
  • Waterproof & Durable: Engraving blanks are insoluble in water, anti-corrosion, non-fading, and anti-scratch.
  • Laser engraved patterns can firmly bond to the surface of the metal, glass, and ceramics, can be machine washed more than a hundred times.
  • Wide Application: Used extensively in the automotive, aerospace, medical and electronic industries for products identification and traceability, and DIY Crafts.
  • Easy to Use & Process: Each sheet is 15.4" x 10.6" ample enough to cut into any size to meet different needs. Laser engraver marking paper made of premium material can efficiently absorb the laser energy, making your laser engraving process simple and easy.
  • Professional Service: Use our laser engraving papers to engrave exquisit on metal, glass, and ceramics.
  • if you need any assistance, please feel free to contact us, we take full responsibility for the quality of our laser engraving supplies and will solve your problem within 24 hours.
Check Stock

WIZMAKER L1 Laser Engraver, 20W Output Power Laser Cutter, High Accuracy Laser Engraving Machine, 120W Laser Cutting Machine with Air Assist, Lazer Engraver for Wood and Metal, Acrylic, Leather

  • 【Faster Speed & High Accuracy】 Upgraded 20-24W Laser module and 32 bit motherboard support faster cutting and engraving speed. Ultra-fine laser focus is reduced to 0.06 x 0.06mm, provide you a higher accuracy engraving artwork. WIZMAKER laser engraver can cut 10-12mm paulownia wood and 8-10mm acrylic in one pass, and up to 20mm wood, 15mm acrylic, 0.05mm metal steel. Also can directly engrave metal, ceramics, glass, the engraving and cutting speed is 40% higher than the ordinary model..
  • 【Solid & Easy to Install】 The sturdy and easy installation all-aluminum alloy anodized structure, and all-metal wheel, shaft, and enclosed synchronous belt makes the laser module still ensure motion stability under high-speed up to 400mm/s, improves the accuracy of engraving. And the entire structure of laser cutter has been designed for quick assembly, and the assembly can generally be completed within 10-25 minutes..
  • 【Safe & Longer Service Life】 The red emergency button on the laser engraving machine allows you to stop the operation at any unexpected situations. The laser eye shield on laser module can effectively filter 97% of UV rays, effectively protectin....
Check Stock

Ebamaz Metal Business Cards Anodized Aluminum Plaque Plate 86X54X0.8mm Black Blank,10PCS

  • 1. Anodized Aluminum material, thick&firm, not easy to bend. The edge also anodized with color. Laser engraved logo will not be removed and easy to....
  • 2. 3.4X2.1X0.031 inch. Similar size as the credit card. Each card is inside individual plastic sleeve to keep them fingerprint-free until time to....
  • 3. High class design, blank /round corner/edge not rough. Suitable as VIP card or gift metal card for company or organization to make it more....
  • 4. Make sure your engraver is powerful enough to engrave metal, ours is fiber laser machine 15W for your reference. These metal business cards can NOT....
  • 5. Notice: CO2 engraver CAN NOT engrave metal material, it mainly engraves wood, Acrylic, leather, plastic, glass, PVC...but not metal.
Check Stock

Ball Vise Engraving Setting Tool 360°Rotation Professional Ball Vise 30 PCS Attachment Jewelry Engraving Block Tools Standard Block (3inch)

  • ...lity of the machine to cut and 36W is the machine power of the laser machine.
  • Higher Accuracy - xTool D1 laser cutter adopts a 0.08mm*0.08mm ultra-fine compression spot, resulting in detailed and vivid engraving images.
  • All-Metal Made - The all-steel wheel, shaft, and enclosed synchronous belt make the xTool D1 Laser engraver more stable with less noise and 3 lifetimes longer than similar products.
  • Fulfill Your Imagination with One Pass - xTool D1 works well on cutting a 6mm wood board and a 3mm black acrylic in one pass, smoothly cutting surface with fewer burn marks.
  • Wide Compatibility - xTool D1 supports LightBurn and Laserbox Basic (available on mobile devices). You can transfer data via Wi-Fi, USB cable, and TF card to use the laser engraver.
  • Make Your Creativity a Breeze - xTool D1 5W is the ideal and user-friendly laser engraver for beginners to start off with, like making greeting cards, patterns-engraving, and your personal artwork.
  • Eye Protection Design - The anti-UV filter acrylic on the laser module filters 97% of UV rays to protect your eyes and those around you.
  • Professional Support - We have a professional US technical team and support website to solve all your problems within 24 hours.
Check Stock