Reviews Large Head Grip Range Rivets

POP Rivet 18-8 Stainless Steel - 8-12 1/4 x 3/4 Gap 0.626-0.750 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 3-2 3/32 x 1/8 Gap 0.032-0.125 Qty-250

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-6 1/4 x 3/8 Gap 0.251-0.375 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

PAGOW 3/16 x 1 Inch 4.8x25mm Flange Aluminum Blind Rivet Large Self-Plugging Open End Decorating Fastener Nails Pop Rivets Core Pulling Rivets Grip Pange 11/16-3/4 Inch 17.4-19mm 60 Pcs

  • Material: These large bolt dropper rivets are made from high quality aluminum alloy which is one of the highest forms corrosion resistance, making it longer last, sturdy, light, durable, easy and convenient to use. The highest quality will support all of your projects..
  • Head Size: Head diameter 3/16" (4.8mm), Length: 1" (25mm). Large Flange OD: 5/8" (16mm), Grip Range: Diameter 3/16"(4.8mm), Length: 11/16"-3/4"(17.4-19mm)..
  • Fitted Tools: The flange blind rivets assortment perfect fitted with automatic riveting machine, rivet bucket, and rivet gun..
  • Easy to use: The rivet assembly is inserted into a hole drilled through the parts to be joined and a specially designed tool is used to draw the mandrel into the rivet. Using a rivet gun, the centerpiece (mandrel) is pulled up and creates a bulge at the bottom permanently locking and securing the material..
  • Applications: The aluminum open end pop long rivets are very strong and are great be used in a variety of environments including salt water, freshwater, indoor and out,and widely suitable for joining plastics, rubber, wood, grip and laminates, is used in assembly of caravans, trailers, furniture, plastic-framed window body..
Check Stock

ISPINNER 180pcs 6 Sizes Aluminum Blind Rivets, Pop Rivets Assortment Kit (Black)

  • HIGH QUALITY - Black Aluminum Grip and Steel Mandrel. This high corrosion resistance makes them the perfect choice for use in any environment..
  • STRONG HOLD - Large flange aluminum blind rivets can increase the connect area with the board to increase the force area. Thick shaft to ensure a secure hold and pop when tight..
  • DIMENSIONS - Grip Diameter: 3/16" | Grip Length: 1/2" | Grip Range: 6.0-8.0mm | Flange Diamter: 5/8".
  • PACKING - 50pcs 3/16"x1/2" pop rivets with aluminum large flange.
  • WIDE APPLICATION - Our rivets are very strong and are great for both indoor and outdoor use. They are great to have around for when you need them most. It does not deform surfaces after the riveting process is finished. Good resistance to temperature variations..
Check Stock

USA Fittings 100 Copper Pop Rivets 1/8 Diameter Brass Mandrel Blind Rivets Dome Head 4-4 1/8 Diameter x 1/4 Grip Qty 100

  • Open End Dome Head Copper Rivets with Brass Mandrel.
  • #4 (1/8 inch) Diameter Blind Rivets - Corrosion & Rust Resistant with a Decorative Finish.
  • 4-2 Grip Range: (0.020 - 0.125), 4-4 Grip Range: (0.188 - 0.250).
  • Great for a wide variety of applications and commonly used for for fastening copper or brass sheets.
  • Perfect for most environments because of their superior thermal and electrical conductivity.
Check Stock

FPC84S-100 Short Steel Rivets - 1/4' Diameter, 1/4' Grip - 100 Count

  • Large head rivets have an aluminum mandrel.
  • Rivets have a 1/4 inch to 3/8 inch range.
Check Stock

Keadic 75Pcs 3 Sizes 3/16 Black Aluminum Blind Rivets Assortment Kit Includes 1/8 x 9/32 3/8 7/16 1/2 Open End Domed Head Pop Rivets for Joining Metal Plate Pipe

  • 【3 Popular Sizes Pop Rivet Set】The large flange blind rivets kit contains 25pcs 3/16” x 5/8” (4.8x16mm) pop rivets, 25pcs 3/16" x 4/5" (4.8x20mm) pop rivets, 25pcs 3/16" x 1" (4.8x25mm) pop rivets, totally 75 pcs. All are packed by sizes in a sturdy storage container for convenient storage. Pls refer to the picture for more size detail..
  • 【Premium Aluminum Material】 Blind pop rivets have high-quality aluminum body and steel mandrel for corrosion and rust resistance. It does not deform surfaces after the riveting process is finished. Smooth and burr-free surface can be well matched with the rivet gun..
  • 【Provide A Strong Grip】The heavy duty material and thick shaft design offers a strong grip, prevent stripping effectively and a lasting connection without corrosion or popping. The large flange design can increase the connection area with the plat to expand force-bearing area and stable holding..
  • 【Easy to Use】 Simply drill a suitable hole and insert the blind rivet head into it and use rivet gun to pull the mandrel through. Then, you can lock the rivet in place and get a strong fastening..
  • 【Multipurpose Fastener】Our aluminum large flange rivet is corrosion and rust resistant so that they are works great on indoor and outdoor. Ideal fo....
Check Stock

Black Pop Rivets 1/8 Diameter #4 All Aluminum Painted Blind Rivets 4-3 1/8 x 3/16 Grip QTY 250

  • 4-3 Grip Range: 3/16" (0.126 - 0.187), 4-4 Grip Range: 1/4" (0.188 - 0.250).
  • Paint finish on a 1/8 All Aluminum Pop Rivet.
Check Stock

ISPINNER 100pcs 1/8 x 3/8 Aluminum Blind Rivets 3.2 x 10mm Pop Rivets Pack of 100 Silver

  • HIGH QUALITY - These rivets are made of Aluminum Grip and Steel Mandrel. With high performance of corrosion resistance and acid resistance, they are strong and durable, when installed, you will no longer worry about them rusting and breaking..
  • SIZE - Head Diameter: 1/8" | Grip Length: 3/8" | Flange Diameter: 1/4 " | Grip Range: 5.0-7.0mm.
  • PACKING - 100pcs packed in a delicate paper bag, easy to store..
  • WIDE APPLICATION - Our rivets are very strong and very suitable for indoor and outdoor use. They are perfect for you when you need them most. After the riveting process is completed, it will not deform the surface. Good resistance to temperature changes..
  • TIPS - Please check PICTURE 4 for SIZE SPECIFICATION..
Check Stock