Reviews Lampshade Converter Kit

Canomo 2 Set Nickel Lamp Shade Holder Lamp Harp and E26 Socket Base UNO Fitter Adapter Converter with Finial Set for Table and Floor Lamps, 10 Inch

  • Note: Please make sure your lamp bulb base is E26 with Collar Ring (such as pictures),Dedicated to E26 lamp holder converter detachable lamp Harp.
  • This listing is the 10 inches lamp harp, don't forget to add the tall of the buld holder, your lampshade should be tall than 12 inches.
  • Dedicated to E26 lamp holder converter detachable lamp Harp,Bulb Socket tall 2 inches, Bulb Socket equipped with harp,total tall is 10inch+2inch, so use for lampshade tall should be more than 12 inch..
  • Easy installation: this lamp harp is detachable and easy to be installed.
  • Size: harp 9.5 inch Tall, base internal diameter is 1-7/16 inch (3.6 cm), Harp total tall: 10 inch=Harp 9.5 inch + 0.5 inch Adapter.
  • Package includes: 2 set lamp harp with UNO adapter, 2 x instructions.
Check Stock

DIY Lampshade Kit – 16 Inch Easy Drum Lamp Shade Making Kit for Floor, Desk, Table Lamps & Pendants – Made in the UK – Needcraft Trusted Brand - 1 Pack

  • A LAMPSHADE HANDMADE BY YOU: Make a 16 inch shade to match décor in any room. Looking to create a unique lamp on your desk table or by your bookshelf? Searching for a gift that is personal and homemade yet of the utmost quality? Our British-made DIY lampshade kits have everything you need to make your lampshade but the fabric. Find some fantastic fabrics or wallpaper for your lamp to match or enhance your furniture, cushions, and home décor. Ideal for both beginner and professional crafters..
  • MADE IN THE UK: Making lampshade makers happy for over 50 years. Our kits have been engineered for quality and are used by professional laborers in the soft furnishing industry worldwide. With FAQs as well as ‘how-to’ videos online that can guide you, we also have a strong community of makers all over the world. They support each other in the creative process throughout making lampshades. Our kits are popular with schools, colleges, and craft making workshops..
  • EASY TO USE & WITH SIMPLE STEP INSTRUCTIONS: Create a beautiful shade in less time than it takes to go to the store. Cut your fabric or wallpaper to size and peel the self-adhesive lampshade panel onto the fabric. Then with the strong self-adhesive tape, tack the wire and panel together. Use the tucki....
Check Stock

DIY Lampshade Kit – 18 Inch Easy Drum Lamp Shade Making Kit for Floor, Desk, Table Lamps & Pendants – Made in the UK – Needcraft Trusted Brand – 1 Pack

  • A LAMPSHADE HANDMADE BY YOU: Make an 18 inch shade to match décor in any room. Looking to create a unique lamp on your desk table or by your bookshelf? Searching for a gift that is personal and homemade yet of the utmost quality? Our British-made DIY lampshade kits have everything you need to make your lampshade but the fabric. Find some fantastic fabrics or wallpaper for your lamp to match or enhance your furniture, cushions, and home décor. Ideal for both beginner and professional crafters..
  • MADE IN THE UK: Making lampshade makers happy for over 50 years. Our kits have been engineered for quality and are used by professional laborers in the soft furnishing industry worldwide. With FAQs as well as ‘how-to’ videos online that can guide you, we also have a strong community of makers all over the world. They support each other in the creative process throughout making lampshades. Our kits are popular with schools, colleges, and craft making workshops..
  • EASY TO USE & WITH SIMPLE STEP INSTRUCTIONS: Create a beautiful shade in less time than it takes to go to the store. Cut your fabric or wallpaper to size and peel the self-adhesive lampshade panel onto the fabric. Then with the strong self-adhesive tape, tack the wire and panel together. Use the tuck....
Check Stock

DIY Lampshade Kit – 14 Inch Easy Drum Lamp Shade Making Kit for Floor, Desk, Table Lamps & Pendants – Made in the UK – Make Your Own Lighting – 1 Pack

  • A LAMPSHADE HANDMADE BY YOU: Make a 14 inch shade to match décor in any room. Looking to create a unique lamp on your desk table or by your bookshelf? Searching for a gift that is personal and homemade yet of the utmost quality? Our British-made DIY lampshade kits have everything you need to make your lampshade but the fabric. Find some fantastic fabrics or wallpaper for your lamp to match or enhance your furniture, cushions, and home décor. Ideal for both beginner and professional crafters..
  • MADE IN THE UK: Making lampshade makers happy for over 50 years. Our kits have been engineered for quality and are used by professional laborers in the soft furnishing industry worldwide. With FAQs as well as ‘how-to’ videos online that can guide you, we also have a strong community of makers all over the world. They support each other in the creative process throughout making lampshades. Our kits are popular with schools, colleges, and craft making workshops..
  • EASY TO USE & WITH SIMPLE STEP INSTRUCTIONS: Create a beautiful shade in less time than it takes to go to the store. Cut your fabric or wallpaper to size and peel the self-adhesive lampshade panel onto the fabric. Then with the strong self-adhesive tape, tack the wire and panel together. Use the tucki....
Check Stock

KENDA Juggernaut Tire 26 x4.00 Wire Clincher DTC 60TPI Black

  • 【Brand new predator 212cc 6.5 hp go kart torque converter clutch kit】 This 3/4" Torque Converter is a direct replacement kit for the most popular....
  • 【TAV2 30 Series Go Kart Clutch Kit】This torque converter fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or....
  • 【30 Series Toruqe Converter Belt for 6" Driven】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75").....
  • 【This clutch will help you get more power out of your small engine by reducing engine load】 A torque converter acts similar to a transmission,....
  • 【For your convenience this kit comes with】1 x 3/4" Driver Pulley.
Check Stock

212CC Torque Converter 6.5 HP 3/4 Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain Predator Driver Pulley Replacement Set - 30 Series

  • 【Brand new predator 212cc 6.5 hp go kart torque converter clutch kit】 This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque-converter 30 series. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts..
  • 【TAV2 30 Series Go Kart Clutch Kit】This torque converter fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2-8hp. 30 series Asymmetrical design. Bring your off-road machine to life..
  • 【30 Series Toruqe Converter Belt for 6" Driven】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"..
  • 【This clutch will help you get more power out of your small engine by reducing engine load】 A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
  • 【For your convenience this kit comes with】1 x 3/4" Driver Pulley.
  • 1 x 10 Tooth Sprocket for #40/41/420 Chain.
  • 1 x 12 Tooth Sprocket for #35 Chain(Chain not inclu....
Check Stock

GREHUA Upgrade Carburetor Carb Air Filter Adapter with Mini Air Filter Jet Kit for Predator 212cc 6.5 Hp Gx160 Gx200 196cc Baja Mb200 Ct200u BT200x KT196 Performance Parts Stage 1 Go Kart Mini Bike

  • 【Brand new predator 212cc 6.5 hp go kart torque converter clutch kit】 This 3/4" Torque Converter is a direct replacement kit for the most popular....
  • 【TAV2 30 Series Go Kart Clutch Kit】This torque converter fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or....
  • 【30 Series Toruqe Converter Belt for 6" Driven】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75").....
  • 【This clutch will help you get more power out of your small engine by reducing engine load】 A torque converter acts similar to a transmission,....
  • 【For your convenience this kit comes with】1 x 3/4" Driver Pulley.
Check Stock

Zipper Gap Buckle compatible with Neverfull Pochette Little Pouch Chain Strap Connective Buckle (Gold)

  • 【30 Series Torque Converter Clutch Kit】 This 3/4" Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts..
  • 【For your convenience this kit comes with both sprockets】This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life..
  • 【The Belt Feature】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"..
  • 【Special function】This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
  • 【Go Kart Torque Converter Kit comes with】1 x 3/4" Drive....
Check Stock

30 Series 6.5 HP 212CC Torque Converter Clutch Driver Pulley Go Kart/Mini Bike Comet Manco 3/4' Bore Max Torque Replaces,with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589

  • 【30 Series Torque Converter and Go Kart Drive Belt】 ：New 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC. Recommended engine: 2HP-8HP. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch.3/4″ Bore Max Torque, with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589..
  • 【Torque Converter】：This 3/4″ Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series..
  • 【Wide Use–torque converter 3/4】: Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers.For Go Kart, Mini Bike, Lawnmower, small tractors, Fun Kart, Golf Karts, mini choppers, ATV, motorcycles, and waterski winches etc..
  • 【Go Kart Drive Belt】: 30 Series Go Kart Drive Belt torque converter belt Replaces For manco 5959/comet 203589 murray 12-8487 baja Motorsports BB65-395 ken-Bar 300-009 255-299 rotary 8487. Width: 0.4″, Length: 27-1/32″..
  • 【Wide Use–go kart clutch belt】: The go-kart drive belt used on most Manco, American Sportworks and Ken-bar Karts with 5hp-7hp engines.Also used on the Comet TAV2 bolt on torque-a-verter kit.Center to center spacing for the driver and driven pulley ne....
Check Stock

BLAST LED - Predator 420CC Go Kart Torque Converter Kit 40 Series Mounting Back Plate 1 Driver Driven Pulley Belt Mounting Hardware 3/4 Driven Pulley

  • 40 series torque converter Kit FITS 8HP - 18HP Engines with a 1" Crankshaft, and 1/4" Keyway: Replaces COMET - 209133, 209133A, 209139, 209139A,....
  • COMPLETE KIT - Package includes: Bolt On Mounting Back Plate, 40 Series 1" Driver Pulley, 40 Series Driven Pulley, 203785 Belt, and all installation....
  • Ideal for Predator 420CC, Honda GX 340/390, Briggs and Straton, Vanguard V-Twins..
  • NO JACKSHAFT NEEDED - Includes mounting back plate with an integrated jackshaft specially designed for 40 series torque converter kit.
  • EASY TO INSTALL- BOLT ON Torque Converter kit that fits all 8HP - 18HP engines.
Check Stock