Reviews Lag Bolt Size For Tv Mount

Skywalker Signature Series 8in Heavy-Duty Wall Mount

  • Brackets can accommodate masts up to 1-1/2" outer diameter.
  • Use to mount a mast against buildings/houses.
  • Perfect for outdoor TV antenna & dish installations.
  • Sturdy metal construction | Standoff from wall: 8 inches.
  • (2) U-Bolt with V-Block Brackets included with lag bolts.
Check Stock

12 Inch Heavy-Duty Antenna Wall Mount, 1 Pair

  • Brackets can accommodate masts up to 2-1/2" outer diameter.
  • Use to mount a mast against buildings/houses.
  • Perfect for outdoor TV antenna & dish installations.
  • Sturdy metal construction | Standoff from wall: 12 inches.
  • (2) U-Bolt with V-Block Brackets included with lag bolts.
Check Stock

Kanto PDC650 Full Motion Corner TV Mount for 37-inch to 70-inch TVs | Supports up to 125 lbs | Swivel 40° | Tilt +15°/-3° | Black

  • SECURE CORNER MOUNTING - Featuring two independent wall plates, the PDC650 allows for TVs weighing up to 125 pounds to be safely mounted to any corner, column or pillar..
  • PAN AND SWIVEL - Swivel the articulating arms up to 40° in either direction to ensure your TV is properly positioned. Note that the range of movement will depend on the size of your TV and the location of the wall plates..
  • ANGLED VIEWING - In order to improve line-of-sight with your TV and reduce glare, the VESA compliant TV brackets can be tilted 15° forward and 3° backward..
  • TIDY SETUP - Cable management clips are provided to conveniently route your cables, while plastic wall plate covers hide any sign of installation..
  • EVERYTHING YOU NEED - The PDC650 comes with a convenient bolt box containing all the lag bolts, anchors, washers and spacers you’ll need to safely mount your TV..
Check Stock

Kanto R500 Recessed In-Wall Full Motion Articulating TV Mount for 46-inch to 80-inch TVs | Ultra Low Profile | Swivel and Tilt Capable | Cable Management for Clean Setup

  • Ultra-low profile – achieve a minimalist Home theater setup without sacrificing the functionality of a full motion TV mount. The r500’s recessed in-wall design is made to fit securely between 16-inch stud centers. When fully pushed back, Its Articulating arm assembly allows your flat screen TV to sit almost flush with the wall..
  • Better viewing experience – use the r500’s Articulating arm to ensure you always have the perfect viewing angle. Extend it out 27. 6. 5 inches and swivel to 90° in either direction, depending on screen size. An accessible tilt mechanism Also allows you to angle your TV 10° forward to further improve line-of-sight, or 5° backwards to reduce glare..
  • Safe & secure – mount your TV with confidence. Constructed out of solid steel, the R500 recessed wall mount safely supports 46 to 80-inch flat panel TVs weighing up to 135 pounds. Its adjustable mounting brackets accommodate VESA sizes from 100x100 to 600x400 to ensure a perfect fit with your television..
  • Sleek cable management – The recessed mounting box features multiple holes to allow you to easily run wires through your wall, keeping them safe and concealed. To complete your clutter-free setup while maintaining a tidy viewing area, secure your cables to....
Check Stock

Kanto FMX3 Full Motion Articulating TV Mount for 40 to 90 inch TVs | Supports up to 150 lb 68 kg | Up to 28 Extension | +15° to -5° Tilt | 88° Swivel | Black

  • ENHANCED TV VIEWING EXPERIENCE – The FMX3 is the ultimate TV mounting solution. This full motion mount will improve your television experience by letting you extend, swivel, and tilt your flat-screen TV to any desired angle. It extends 28 inches from the wall, tilts +15°/-5°, and swivels up to 80 degrees left and right, depending on screen size. It also features adjustable horizontal leveling to ensure your TV is perfectly positioned..
  • STAY ORGANIZED AND SAVE SPACE – Increase floor space and improve the appearance of any room or office by mounting your TV with the FMX3! Removable cable management clips hook easily onto the extension arms and can be positioned to route your cables neatly back to the wall. Keep your cables tidy and out of sight for a clean, organized look..
  • SUPERIOR CONSTRUCTION – The FMX3’s solid steel construction and heavy-duty lag bolts are designed to support up to 150 pounds and accommodates VESA sizes from 200x100 to 700x500. Its long-lasting, powder-coated finish also looks great against any wall or surface..
  • IMPROVES SAFETY AND SECURITY – Regular TV stands are often prone to tipping, increasing the likelihood of damaging your screen or injuring others. Mounting your flat screen TV with the FMX3 is the best w....
Check Stock

Kanto PX720 Articulating Full Motion TV Wall Mount for 42-inch to 100-inch TVs | Black

  • FULL MOTION DESIGN - Heavy-duty articulating arms allow you to safely extend your TV 31" from the wall and swivel it up to 90° in either direction, depending on screen size. Maintain a perfect viewing angle wherever you’re seated..
  • TOOLLESS TILT - An easy-to-use, toolless tilt mechanism allows you to angle your TV up to 15° forward or 3° backward in order to reduce glare and improve line-of-sight when mounting above eye-level. The tilt head can be tensioned to allow for on-the-fly adjustments or to lock your TV in place at the desired angle..
  • HASSLE-FREE INSTALLATION - Use the provided drill template to accurately mount your TV to brick, concrete or wood studs up to 24" apart. A carefully organized hardware box is also included with all the lag bolts, anchors, washers and spacers you’ll need for a custom fit installation..
  • SAFETY FIRST - The PX720's high-grade steel construction and heavy-duty lag bolts safely support 150 lb., even at full extension. Mount up to a 100" TV without hesitation..
  • CLEAN SETUP - In addition to providing a low-profile solution for displaying your TV, the PX720 comes with wall plate covers and cable management raceways to ensure your viewing area remains tidy..
Check Stock

Mount-It! MI-2829 Small TV Monitor Wall Mount | RV TV Mount | VESA Wall Mount | Fits 19 20 21 22 23 24 25 27 32 Inch Screens | 75 100 VESA Compatible | Low-Profile Slim Design | 44lb Capacity

  • SMALL TV MONITOR WALL MOUNT Fits one computer screen or television 19 20 21 22 23 24 25 inches in size with a maximum support weight of 44 pounds each using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the tv/monitor Mounts to a single stud on the wall.
  • FEATURES VESA Wall Mount is low profile (2 4 inches away from the wall) and has a slim design and allows the screen to tilt 12 degrees down and swivel 30 degrees to left and right Its sturdy construction holds up to a whopping 44 pounds!.
  • COMPATIBILITY RV tv mount can be used with *any* brand of television or PC monitor so long as it has the 75mm or 100mm VESA bolt hole pattern and is no larger than 25 inches (measure the distance between VESA bolt holes in millimeters if unsure of size).
  • EASY INSTALLATION Computer monitor wall mount comes with all mounting hardware tools and instructions necessary for assembly Only needs a single stud to mount tv or monitor to the wall.
  • US-BASED CUSTOMER SUPPORT Our friendly and responsive customer support team is available to answer any questions you may have and mount comes with a 5-YEAR.
Check Stock

Kanto PDX650G Outdoor Full Motion Articulating TV Wall Mount for 37-inch to 75-inch TVs Up to 125 LB | Galvanized Steel Arms | Integrated Cable Management | Low Profile and 22 in Extension

  • MADE FOR THE OUTDOORS – Assembled with stainless steel mounting hardware, the PDX650G Outdoor TV Mount features a galvanized steel frame designed to....
  • BETTER VIEWING EXPERIENCE – Featuring two wishbone arms for maximum stability, this full motion wall mount can extend a remarkable 21.8” from the....
  • CLEAN APPEARANCE – The PDX650G comes with magnetic wall plate covers to hide any sign of installation, as well as cable management raceways to keep....
  • EASY INSTALLATION – A conveniently labeled bolt box provides all the necessary hardware for wood stud and concrete walls, while a precision drill....
  • SAFE & SECURE – Featuring a solid steel frame and 65mm lag bolts, this heavy-duty TV bracket safely supports up to 125 pounds, even at full....
Check Stock

Kanto FMX3C Full Motion Articulating TV Mount for 40 to 90 inch TVs | Up to 28' Extension | Solid Steel Construction | White

  • ENHANCED TV VIEWING EXPERIENCE – The FMX3 full motion wall mount helps to improve your viewing experience by letting you extend, swivel, and tilt your TV to accommodate your seating position. Pull your screen 28" from the wall, tilt it +15°/-5°, and swivel it 45° to 88° left or right, depending on screen size. Adjustable horizontal leveling is also provided to ensure your TV is perfectly positioned..
  • STAY ORGANIZED AND SAVE SPACE – Increase floor space and improve the appearance of any room or office by mounting your TV with the FMX3. Removable cable management clips hook easily onto the extension arms and can be positioned to route your cables neatly back to the wall. Keep your cables tidy and out of sight for a clean, organized look..
  • SUPERIOR CONSTRUCTION – The FMX3’s solid steel construction and heavy-duty lag bolts are designed to support up to 150 pounds, making it perfectly suited for TVs as large as 90 inches. Its long-lasting, powder-coated finish also looks great against any wall or surface..
  • IMPROVED SAFETY AND SECURITY – Regular TV stands are prone to tipping, increasing the likelihood of damaging your screen or injuring others. Mounting your flat screen TV with the FMX3 is the best way to ensure that it remains securely in pla....
Check Stock

Kanto PMX700 Pro Series Full Motion Articulating TV Wall Mount for 42-inch to 100-inch TVs | Adjustable Positioning | Integrated Cable Management | Toolless Tilt

  • HORIZONTAL OFFSET – All PMX mounts feature a segmented design that allows the arm assembly to be easily removed and positioned, independent of the wall plate. This setup makes it easier to center your television, regardless of the location of the studs..
  • EASY INSTALLATION – Installing a PMX TV mount is quick and easy. Weighing less than 10 pounds, the wall plate can be installed unassisted. The arm assembly can then be hooked into place before securing it with the provided hardware..
  • TOOLLESS TILT – The PMX series features a specially designed tilt mechanism that allows for precise adjustments to be made without the need of tools. Set the tension to allow for finger-tip adjustments, or lock it in place at the desired angle..
  • SUPERIOR EXTENSION – This wall mount is made from solid steel and has heavy-duty wishbone arms that allow maximum extension and support, even for larger televisions..
  • CONVENIENT BOLT PACK – The PMX700, along with the other TV mounts in the PMX Series, is carefully packaged with all the lag bolts, anchors, washers, and spacers needed for both wood studs and concrete walls..
Check Stock