Reviews Knockout Punch Kit

Klein Tools 53732SEN Punch Set, Knockout Punch Set Punch Down Tools with Ratcheting Wrench for 10 gauge Mild Steel, Fiberglass and Plastic

• Punch Set includes 1-Inch (25 mm) ratcheting wrench, knockout punches, dies and draw studs for 1/2-Inch (13 mm), 3/4-Inch (19 mm), 1-Inch (25 mm), 1-1/4-Inch (32 mm), 1-1/2-Inch (38 mm) and 2-Inch (51 mm) conduit sizes.
• also cuts aluminum, fiberglass and plastic.
• Kit includes six different size knockout punches and dies, two draw studs and ratcheting box end wrench.

Sealproof 5 Hole 1/2-Inch Holes Weatherproof Round Electrical Outlet Box with 5 Outlet Holes, 1/2\ Dia, UL Listed, Bronze

• 【ETL listed】: NEMA 14-50R receptacle 125V/250V, power for your RV, trailer camping ground..
• 【ENOUGH SPACE】: There is enough space for close the lid while plugging the cord even with a big handle or heavy duty very stiff rated wire. You can also adjust box lid position while installing panel and connecting power cord..
• 【With Lock】: RVGUARD power outlet box elevated cover with padlock prevents unauthorized use. Anti-theft lock enclosure..
• 【WeatherProof】: High-quality box, can be installed outdoors and indoors, work with your motorhome, generator, welder ect..
• 【Installation Advice】 : Knockout Hole by using knockout punch kit, multiple punching locations for you to choose.

Greenlee 7310SB HAND PUMP HYD SB 1/2 - 4

Greenlee 7906SB QUICK DRAW 90, SB, 1/2' - 2'

Mophorn 10 Ton 1/2' to 2' Hydraulic Knockout Punch Driver Tool Kit Electrical Conduit Hole Cutter Set KO Tool Kit with 6 Dies Hole Complete Tool (Knockout Punches)

• Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage. With a safety valve, the pressure will release automatically when the pressure reaches the limited max..
• Durable Dies & Punches Set: The knockout punch set comes with six punching dies(1/2", 3/4", 1", 1-1/4", 1-1/2", and 2"), drilling holes from 0.86" to 2.36", fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 0.13".
• Max thickness for stainless steel: 0.08"..
• Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..
• Portable Carrying Case: The stud punch tool is stored in a durable plastic toolbox that is not easily broken, saving space. It is compact, light-weight, and easy to carry. Besides, it also reduces the possibility of missing parts..
• Wide Application: This manual metal stud punch tool can be used for professional equipment drilling, punching 11 Ga mild steel, iron plate, and also can be used for personal ....

ANBULL Hydraulic Knockout Punch Set Max 6T with 6 Dies Metric from 16mm to 32mm (Φ5/8\ to Φ1-1/4\), Hydraulic Metal Hole Punch W/Tool Case

• 【Labor-Saving Hydraulic】: The maximum pressure of the ANBULL hydraulic knockout punch driver can reach 6 tons. It can easily open holes on the thickest 2.5mm iron plate and the thickest 1.5mm stainless steel plate..
• 【Integrally Formed】: Integrally formed so the hydraulic knockout punch driver does not leak oil..

HORUSDY 28-Piece Heavy Duty Punch and Chisel Set Including Taper Punch Cold Chisels Pin Punch Center Punch

• Available in 28 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
• Product material: made of chrome vanadium steel, hardness: 54~58HRC, Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
• 16PC Chromium Vanadium Steel：punch and chisel set comes with 16-pc. chrome vanadium punch and chisel set, 5-pc. pin punches, 5-pc. taper punch, 3-pc. cold chisel, 2-pc. center punch and chisel punch gauge..
• 12PC High Carbon Steel：6PC cold chisel set, 4PC pin punch set and 2PC center punch..
• It is equipped with a special storage bag for easy carrying..

SWANLAKE 28PCS Heavy Duty Punch and Chisel Set,Taper Punch, Cold Chisels, Pin Punch, Center Punch

• 1.This 28pcs punch and chisel set contain: 16pcs punch and chisel set made of chrome vanadium,12pcs punch and chisel set made of carbon steel ..
• 2.Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
• 3.Available in different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
• 4.Flat chisels are tempered to resist splitting and mushrooming..
• 5.Roll-up storage pouch makes easy storage..

SEDY 16-Piece Punch and Chisel Set, Including Taper Punch, Cold Chisels, Pin Punch, Center Punch

• Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
• Product material: made of Chrome Vanadium Steel, hardness: 54~58HRC. Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
• 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1/4" x 6-3/4".
• 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4".
• 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2".

Greenlee 7646 Hydraulic Knockout Punch Driver

• Compatibility - works with all Greenlee knockouts. Same draw studs used with Intel-PUNCH , LS50L2 and 746A ram.
• Package dimensions:18.7"L x 5.7"W x 16.4"H.