Reviews Keurig Pod Holder Replacement

Replacement Cup Pod Holder Needle Assembly Parts For Keurig 2.0 Coffee Maker - Accessories For Keurig 2.0

  • Designed to work with All Keurig 2.0 Models (except for K475) - Including K200, K225, K250, K275, K300, K325, K350, K360, K375, K400, K425, K450, K460, K500, K525, K550, K560, K575, K60, K625, K650, K675..
  • Full Assembly - Comes in a 3-part set, part(1) pod holder , part(2) housing , and part(3) base..
  • This cup holder and the needle assembly are compatible and fit comfortably in the Keurig 2.0 brew chamber.
  • Replace this part if it's broken or missing from your machine..
  • Push up while grabbing the sides of the pod holder assembly.
  • Pull out the pod holder assembly and base.
  • Place the base then the pod holder assembly into the brew head.
  • Warranty - This replacement parts for Keurig 2.0 is made from durable plastic and is dishwasher safe. It’s also BPA free, each part is tested and comes with 1-year manufacturer warranty..
Check Stock

Hamilton Beach 49974 FlexBrew Single-Serve Coffee Maker Compatible with Pod Packs and Grounds, Black

  • ...piercing needle removes for easy cleaning to prevent clogging that can sometimes occur with frequent use..
  • Brew time: In about 3 minutes, flex brew make a strong, great-tasting cup of coffee. And you save energy because rather than heating water continuously, flex brew only heats the water when you're ready to brew..
  • Keurig and K-Cup are registered trademarks of the Keurig green mountain, use of the Keurig and K-Cup trademarks does not imply any affiliation with or endorsement by Keurig green mountain, Inc.
Check Stock

Brand New Holder Replacement Part for Keurig K10 K40 K45 K50 K55 K60 K65 K70 K75 K77 K79 …

  • PureWater Filters pod holder replacement part.
  • New and improved pod holder with puncture needle to fit perfectly with the listed brewer models only.
  • Compatible with Keurig brewer models K10, K40, K45, K50, K55, K60, K65, K70, K75, K77, K79.
  • The pod holder is the part that holds the single-serve capsule that contains ground coffee or tea.
  • LIFETIME WARRANTY and Telephone Support honored by seller and PureWater Filters.
Check Stock

Black Single Serve Cup Holder Replacement Part Keurig B30 B31 B40 B60 B70 compatible with Cuisinart

  • Replacement Single Serve Cup Holder Black.
  • Includes Puncture Needle, if you are still experiencing clogging problems after installation, it could be the top puncture needle that is part of your machine and not this pod holder, you can unclog by using the PureWater Filters Clean pods for routine cleaning (sold separately) and a paper clip for severe cases.
  • Compatible with Keurig Breville Cuisinart Brewers, NOT compatible with Cuisinart SS-15, SS15P1 models..
  • We are not directly affiliated with Keurig, Breville or Cuisinart.
Check Stock

Keurig Main Pump Replacement for B30 B31 B40 B50 B60 B66 B70 B77 B79

  • WIDELY COMPATIBLE With KEURIG: This K Cup Holder coffee maker part can be used for B10, B40, B45, B50, B55, B60, B65, B70, B75, B77, B79, K10, K15,....
  • DEPENDABLE PUNCTURE NEEDLE REPLACEMENT PART: We made our puncture exit needle with food grade high strength stainless steel to reduce bending and....
  • EASY TO REPLACE & USE: Just lift and take out the old broken pod holder and then set & replace this new spare one in place. Once the new holder is....
  • MADE FOR COFFEE: This coffee maker part is an essential accessory part for your coffee maker and is built to last so you can use them whenever you....
  • At Blendin, you get easy-to-install replacement parts for Keurig that work perfectly & fit right into your coffee maker machine. We give you premium....
Check Stock

TreeLen Coffee K Cup Holder, K Pod Storage Organizer, Keurig Cup Holder for Countertops, Kcup Holders for 35 K cups – Matte Bronze

  • Space Saving K Cup Holder for Counter - The bottom of keurig pod holder is flat and smooth that can protect the surface of the counter.Also it can hold up many k cups or coffee pods and take up less space..
  • Large Capacity K Cup Holder - This keurig pod storage is 9*5.3*7 inch,you can storage various sizes of k cups coffee pods or capsules,it can hold up almost 35 k cups or capsules or 50 coffee pods..
  • Anti-Rust K Cup Storage - This vertuo capsule pod holder is made of premium steel coated with one layer of matte bronze finish,allowing the k cup holder waterproof rust resistant and can be used for a long time..
  • Good Choice for Housewarming Gift - This cute design k cup holder is not only a storage organizer to hold coffee pods but also a good choice of housewarming gift that can add elegance to your coffee bar and kitchen..
  • Stylish Cute Design Coffee Bar Accessories - The open top of the coffee pod organizer means you can easily select your favored coffee of the day, and it also save your time in stocking the coffee pods up properly..
Check Stock

Proctor Silex Single Serve Coffee Maker, Compatible with K-Cup Pods or Grounds, Fits a Travel Mug (49969)

  • Brew Coffee Your Way With Single-Serve Pods or Ground Coffee — You’ll Save Money and Counter Space With One Simple Coffee Maker That Easily Brews With Both Ground Coffee and Single Serve Pods..
  • Easy to Use: It Features an Easy-Press Brew Button and Automatic Shutoff, Which Turns It off After the Brewing Cycle Is Complete..
  • Brew up to 10 Oz. With a Single-Serve Pod or 14 Oz. With Ground Coffee: Easily Brew a Bigger Cup of Coffee When You Need to With This Proctor Silex Coffee Maker. Fits Most Tall Travel Mugs to Take Your Coffee on the Go..
  • Grounds Basket and Pod Holder Included: The Single Cup Coffee Maker Comes With a Convenient Grounds Basket and Pod Holder so You Can Brew With Ground Coffee and Pods Right Away Without Having to Buy Accessories..
  • Compact Design: Perfect for Any Size Kitchen, Apartment, Dorm or the Office, This Compact Coffeemaker Makes Having a Morning Cup or Afternoon Pick-Me-Up Easier Than Ever..
  • Mug Not Included: Keurig and K-Cup Are Registered Trademarks of Keurig Green Mountain, Inc. Use of the Keurig and K-Cup Trademarks Does Not Imply Any Affiliation With or Endorsement by Keurig Green Mountain, Inc..
Check Stock

Replacement Parts for Keurig K200 K250 Coffee Maker ONLY (Drip Tray - Black)

  • ...URIG: This K Cup Holder coffee maker part can be used for B10, B40, B45, B50, B55, B60, B65, B70, B75, B77, B79, K10, K15, ,K35, K40, K45, K50, K55, K60, K65, K70, K75, K77, K79, K80,K Classic, Mini, Elite, Cafe, Compact, Select, and Duo Series Models. Sorry 2.0 Models are NOT Compatible..
  • DEPENDABLE PUNCTURE NEEDLE REPLACEMENT PART: We made our puncture exit needle with food grade high strength stainless steel to reduce bending and breaking when you insert the portion pack coffee pods. The plastic housing is also made of BPA Free materials..
  • EASY TO REPLACE & USE: Just lift and take out the old broken pod holder and then set & replace this new spare one in place. Once the new holder is installed, you place the portion pack which contains coffee blends and the coffee maker is ready to brew a fresh cup of coffee. The new holder puncture exit needle allows for finer flow of coffee for fuss-free brews..
  • MADE FOR COFFEE: This coffee maker part is an essential accessory part for your coffee maker and is built to last so you can use them whenever you need a fresh morning cup of joe, a boost, or something to power you up..
  • At Blendin, you get easy-to-install replacement parts for Keurig that work perfectly & fit right into your coffee maker machine. We give you....
Check Stock

Home-it 42 Keurig k cup holder - Drawer for Keurig cup holder - Metal designed k cup storage

  • LIMITED TIME OFFER PRICE MAY INCREASE SOON-- 100% satisfaction guarantee.
  • keurig pod holder easy-open drawers for conveniently organizing.
  • keurig storage drawer supports the weight for 42 kups and designed not to bend.
  • coffee pod holder has modern design and matches any kitchen or office.
  • Dimensions - 13-1/4-inch lenth by 13-1/2-inch width by 3-1/8-inch height.
Check Stock

PureWater Filters Single Serve Pod Holder Puncture Needle Replacement Part for Keurig K-Cup Coffee Brewers

  • One Single Serve Pod Holder with Puncture Needle replacement part by PureWater Filters.
  • Carefully designed to fit K-Cup brewer models K10, K40, K45, K50, K55, K60, K65, K70, K75, K77, K79, B10, B40, B45, B50, B55, B60, B65, B70, B75, B77, B79.
  • Contains the required lower exit piercing needle made with stainless steel.
  • Contains integrated stainless steel lower exit piercing needle.
  • Includes lifetime warranty. Keurig, K-Cup, My K-Cup, and 2.0 are registered trademarks of Keurig Green Mountain, Inc. PureWater Filters is not affiliated with Keurig Green Mountain, Inc..
Check Stock